Benchtop Ion meter for Cd, LBIM-A28 comes with (Cd) cadmium ion selective electrode for cadmium ion concentration measurement. This Ion meter comes with ± 1 % F.S. measurement accuracy. Its direct ion concentration readout helps in elaborate measurement process. The system menu allows setting the 8 parameters like calibration points, stability condition etc. It can measure concentration in ppm, mg / L, mol / L. The mV measurement is used to check the performance of ion selective electrode.
2 - 5 points calibration from low to high concentration
Direct ion concentration readout for elaborate measurement process
Selectable concentration units from ppm, mg / L, mol / L
mV measurements to check the performance of ion selective electrode
Temperature compensation provides accurate reading over the entire range
Stability indicator to show current measurement status
Calibration due reminder for regular calibration of the meter
Auto hold function to freeze stable reading for better viewing & recording
Automatic electrode diagnosis shows the slope of the sensor
Reset setting function
Expanded memory stores and recalls up to 500 readings
Built –in real time clock stamps
USB communication interface to transfer stored data to PC
Benchtop Ion meter is used to measure the cadmium ion concentration present in potable water, D/W water, waste water and natural water resources using different ion concentration electrodes.
Cd Ion selective electrode
Temperature probe
Standard solution (1000 ppm)
Ionic strength adjuster (30 mL)
USB cable
DC 5 V Power adapter
Ion selective electrode: Cd range: 1×106– 1M, 0.01-11200 ppm
Ion standard solutions: 480 mL / bottle
Ionic strength adjuster: 480 mL / bottle
Temperature probe with sensor
Labtron benchtop meters are easy to use. The LCD display, manual or automatic mode of calibration, universal connector and other features are included in this range to produce accurate, reliable results. It consist of benchtop meter for measuring pH, conductivity, dissolved oxygen content, Ion concentration, water hardness level. These meters are suitable for simple to complex applications in water quality testing, research and analysis etc.
Labtron benchtop meters are easy to use. The LCD display, manual or automatic mode of calibration, universal connector and other features are included in this range to produce accurate, reliable results. It consist of benchtop meter for measuring pH, conductivity, dissolved oxygen content, Ion concentration, water hardness level. These meters are suitable for simple to complex applications in water quality testing, research and analysis etc.
Labtron benchtop meters are easy to use. The LCD display, manual or automatic mode of calibration, universal connector and other features are included in this range to produce accurate, reliable results. It consist of benchtop meter for measuring pH, conductivity, dissolved oxygen content, Ion concentration, water hardness level. These meters are suitable for simple to complex applications in water quality testing, research and analysis etc.
Labtron benchtop meters are easy to use. The LCD display, manual or automatic mode of calibration, universal connector and other features are included in this range to produce accurate, reliable results. It consist of benchtop meter for measuring pH, conductivity, dissolved oxygen content, Ion concentration, water hardness level. These meters are suitable for simple to complex applications in water quality testing, research and analysis etc.
Labtron pocket testers are small and compact in size, gives fast and accurate results. The Pocket testers consist of pH, ORP, TDS, dissolved oxygen, salinity and conductivity tester for various laboratory as well as outdoor applications. Measurements can be taken by inserting the probe in to the test solution and after gentle stirring, stable readings can be noted down.
Labtron pocket testers are small and compact in size, gives fast and accurate results. The Pocket testers consist of pH, ORP, TDS, dissolved oxygen, salinity and conductivity tester for various laboratory as well as outdoor applications. Measurements can be taken by inserting the probe in to the test solution and after gentle stirring, stable readings can be noted down.
Labtron pocket testers are small and compact in size, gives fast and accurate results. The Pocket testers consist of pH, ORP, TDS, dissolved oxygen, salinity and conductivity tester for various laboratory as well as outdoor applications. Measurements can be taken by inserting the probe in to the test solution and after gentle stirring, stable readings can be noted down.
Labtron pocket testers are small and compact in size, gives fast and accurate results. The Pocket testers consist of pH, ORP, TDS, dissolved oxygen, salinity and conductivity tester for various laboratory as well as outdoor applications. Measurements can be taken by inserting the probe in to the test solution and after gentle stirring, stable readings can be noted down.
Labtron pocket testers are small and compact in size, gives fast and accurate results. The Pocket testers consist of pH, ORP, TDS, dissolved oxygen, salinity and conductivity tester for various laboratory as well as outdoor applications. Measurements can be taken by inserting the probe in to the test solution and after gentle stirring, stable readings can be noted down.
Labtron portable meters are used in quality analysis of water and other solutions. With portability, waterproof features, finds applications in indoor as well as outdoor measurement of pH, ORP, dissolved oxygen, water hardness, salinity, TDS etc.
Labtron portable meters are used in quality analysis of water and other solutions. With portability, waterproof features, finds applications in indoor as well as outdoor measurement of pH, ORP, dissolved oxygen, water hardness, salinity, TDS etc.
Labtron portable meters are used in quality analysis of water and other solutions. With portability, waterproof features, finds applications in indoor as well as outdoor measurement of pH, ORP, dissolved oxygen, water hardness, salinity, TDS etc.
pH range
-2.00 to 20.00 pH
pH Accuracy
± 0.002 pH
pH Resolution
0.1/0.01/0.001 pH, selectable
pH Calibration Points
1 to 5 Points
pH Buffer Solutions
USA (pH 4.0/7.00/10.01) or NIST (pH 4.01/6.86/9.18) or DIN buffers
mV Mode
mV Range
-1999.9 to 1999.9 mV
mV Accuracy
± 0.2 mV
mV Resolution
0.1/1 mV, selectable
mV Calibration Points
1 Point
Conductivity Mode
Conductivity Range
0.01 to 20.00, 200.0, 2000 µS/cm, 20.00, 200.0 mS/cm
Conductivity Accuracy
± 0.5% F.S.
Conductivity Resolution
0.01/0.1/1
Conductivity Calibration Points
1 to 5 Points
Conductivity Solutions
10, 84, 1413 µS/cm, 12.88, 111.8 mS/ cm
Conductivity Temperature coefficient
0.0 to 10.0 %/°C
Compensation mode
Linear or Pure Water
Cell Constant
K=0.1, 1, 10 or Custom
Reference temperature
20 or 25°C
TDS Mode
TDS Range
0 to 10.00, 100.0, 1000 ppm, 10.00, 100 ppt (Max. 200 ppt)
TDS Accuracy
± 1 % F.S.
TDS Factor
0.1 to 1.0 (default 0.5)
pH range
-2.00 to 20.00 pH
pH Accuracy
± 0.002 pH
pH Resolution
0.1/0.01/0.001 pH, selectable
pH Calibration Points
1 to 5 Points
pH Buffer Solutions
USA (pH 4.0/7.00/10.01) or NIST (pH 4.01/6.86/9.18) or DIN buffers
mV Mode
mV Range
-1999.9 to 1999.9 mV
mV Accuracy
± 0.2 mV
mV Resolution
0.1/1 mV, selectable
mV Calibration Points
1 Point
Conductivity Mode
Conductivity Range
0.01 to 20.00, 200.0, 2000 µS/cm, 20.00, 200.0 mS/cm
Conductivity Accuracy
± 0.5% F.S.
Conductivity Resolution
0.01/0.1/1
Conductivity Calibration Points
1 to 5 Points
Conductivity Solutions
10, 84, 1413 µS/cm, 12.88, 111.8 mS/ cm
Conductivity Temperature coefficient
0.0 to 10.0 %/°C
Compensation mode
Linear or Pure Water
Cell Constant
K=0.1, 1, 10 or Custom
Reference temperature
20 or 25°C
TDS Mode
TDS Range
0 to 10.00, 100.0, 1000 ppm, 10.00, 100 ppt (Max. 200 ppt)
TDS Accuracy
± 1 % F.S.
TDS Factor
0.1 to 1.0 (default 0.5)
Salinity Mode
Salinity Range
0 to 10 ppt (maximum 80 ppt)
Salinity Accuracy
± 1 % F.S.
Measurement modes
Seawater or practical salinity
pH range
-2.00 to 20.00 pH
pH Accuracy
± 0.002 pH
pH Resolution
0.1/0.01/0.001 pH, selectable
pH Calibration Points
1 to 5 Points
pH Buffer Solutions
USA (pH 4.0/7.00/10.01) or NIST (pH 4.01/6.86/9.18) or DIN buffers
mV Mode
mV Range
-1999.9 to 1999.9 mV
mV Accuracy
± 0.2 mV
mV Resolution
0.1/1 mV, selectable
mV Calibration Points
1 Point
Conductivity Mode
Conductivity Range
0.01 to 20.00, 200.0, 2000 µS/cm, 20.00, 200.0 mS/cm
Conductivity Accuracy
± 0.5% F.S.
Conductivity Resolution
0.01/0.1/1
Conductivity Calibration Points
1 to 5 Points
Conductivity Solutions
10, 84, 1413 µS/cm, 12.88, 111.8 mS/ cm
Conductivity Temperature coefficient
0.0 to 10.0 %/°C
Compensation mode
Linear or Pure Water
Cell Constant
K=0.1, 1, 10 or Custom
Reference temperature
20 or 25°C
Dissolved Oxygen Mode
Dissolved Oxygen Range
0.00 to 20.00 mg/ L
Dissolved Oxygen Accuracy
± 0.2 mg/ L
Dissolved Oxygen Resolution
0.1/ 0.01 mg/ L, selectable
Dissolved Oxygen Calibration Points
1 or 2 Points
% Saturation Range
0.0 to 200.0 % with ± 2 % accuracy
Pressure correction
60 to 112.5 kPa, 450 to 850 mmHg
Salinity correction
0 to 50 g/ L
pH range
-2.00 to 20.00 pH
pH Accuracy
± 0.002 pH
pH Resolution
0.1/0.01/0.001 pH, selectable
pH Calibration Points
1 to 5 Points
pH Buffer Solutions
USA (pH 4.0/7.00/10.01) or NIST (pH 4.01/6.86/9.18) or DIN buffers
ORP Mode
mV Range
± 2000 mV
mV Accuracy
± 0.2 mV
mV Resolution
0.1 mV, selectable
mV Calibration Points
1 Point, only for relative mode
Ion Mode
Ion measurement range
0.01 to 30000 ppm, mg/l, mol/l, mmol/l (refer Range of ion selection)
Ion measurement accuracy
±0.5% F.S (Monovalent), ±1% F.S (Divalent)
Ion measurement resolution
0.001/0.01/0.1/1
Ion measurement calibration points
2 to 5 points
Ion measurement calibration solutions
0.001/0.01/0.1/1/10/100/1000/10000 ppm, mg/L, mol/L
Ion measurement methods
Direct reading, Known addition, Known subtraction, Sample addition, Sample subtraction
Water Hardness Mode
Water hardness measurement range
0.05-200mmol/L, 0-1120°dH, 0-1404°e, 0-2000°fH, 0-8000mg/L (Ca2+), 0~19999mg/L (CaCO3)
Water hardness measurement accuracy
±1% F.S
Water hardness measurement resolution
0.001/0.01/0.1/1
Water hardness calibration points
2 to 5 points
Water hardness calibration solutions
0.01/0.1/1/10/100 mmol/L
Temperature Mode
Temperature measurement range
0 to 105°, 32 to 212°F
Temperature measurement accuracy
± 0.5°C, ± 0.9°F
Temperature measurement resolution
0.1°C, 0.1°F
Temperature measurement calibration points
1 point
