Ion chromatograph system LICS-A22

Ion chromatograph system LICS-A22 with cation and anion dual channel design, independently operates and simultaneously detects both channels without disturbing each other. Temperature controlled bipolar conductivity detector, improves the detection performance and stability of the instrument. System is comprised of an auto sampler, anion and cation suppressor.

Ion Chromatographic pump
  • Type: High pressure and low pulse double plunger tandem advection pump
  • Maximum pressure: 35 MPa (PEEK)
  • Display pressure accuracy: ≤ 0.1 MPa
  • Flow stability: (0.2 to 0.5) ml/ min ≤ 3 % , (0.5 to 1.0) ml/ min ≤ 2 %, > 1.0 ml/ min ≤ 2 %
  • Flow range: 0.001 to 9.999 ml/ min
  • Pressure pulse: ≤ 0.5 %
Numerical control and electromagnetic injection
  • Maximum pressure: 35 MPa
  • Contact material of the rotor: PEEK
  • Control mode: By Stepper motor
  • Power supply: DC 24 V
Column heater
  • Operating temperature range: Room temperature 20 to 60°C ( 68 to 140°F)
  • Controlling temperature accuracy: ± 0.01°C
  • Allowable deviation of column heater temperature: ± 2°C
  • Temperature stability: ≤ 1°C/ h
Flow system
  • Plastic flow path: Made up of PEEK material
  • Six way valve: PEEK material pressure 5000 psi, independent automatic collection and flow function
Thermal buffer system for Eluent
  • Temperature range: 25 to 40°C ( 77 to 104°F)
Degassing device
  • Type: Built-in low pressure
  • Vacuum degree: (-) 70 kPa
  • Maximum flow rate: 10 ml/ min
  • Internal volume: 30 µl
  • Degassing efficiency: 10 ml/ min 90 %
Digital temperature and control detection system
  • Type: Temperature-control and Bipolar conductivity detector
  • Detection mode: Bipolar conductivity detection
  • Cell volume: ≤ 0.8 µl
  • Detection range: 0 to 50000 µS/ cm
  • Output voltage: -6000 to +6000 mV (adjustable)
  • Operating temperature: Room temperature 5 to 60°C ( 41 to 140°F)
  • Controlling temperature accuracy: ± 0.01°C
  • Maximum pressure: 10 MPa
  • Linear range: ≥ 103
  • Instrument linearity: ≥ 0.999
  • Quantitative repeatability: ≤ 1.0 %
  • Qualitative repeatability: ≤ 1.0 %
Eluent generator
  • Eluent type: KOH/ NaOH
  • Eluent concentration range: 0.1 to 100 mM
  • Concentration increment: 0.1 mM
  • Flow rate change: 0.1 to 3.0 ml/ min
  • Maximum pressure: 20 MPa
  • Minimum pressure: 5 MPa
Power 150 W
Power supply DC 220 V, 60 Hz
External dimension 500 × 500 × 760 mm
Net weight 48 kg
Gross weight 73 kg
HS code 9027201200
  • 35 MPa maximum pressure ion chromatographic Pump (PEEK material)
  • Auto sampler with (2 ml × 120 samples- Injection unit)
  • Temperature-controlled bipolar conductivity detector
  • Built-in low pressure degassing technology
  • Advanced thermal buffer system for eluent
  • Intelligent (PEEK) flow path system with automatic cleaning mode
  • One key operation to complete flow path switch
  • Highly stable and efficient performance
Accessories no. Name
1 Anion column
2 Guard column
3 Anion Suppressor
4 UV detector
5 Ampere detector
6 Auto sampler (108) samples

Used to detect small molecules (in the form of anion, cation) in water testing & processing plants, food, chemical and dye industry, mining, metallurgy, and other fields.

Ion Chromatographic Pump
Type High pressure and low pulse double plunger tandem advection pump
Maximum pressure 35 MPa (PEEK)
Pressure display accuracy ≤ 0.1 MPa
Flow stability (0.2 to 0.5) ml/ min ≤ 3 %<br/> (0.5 to 1.0) ml/ min ≤ 2 %<br/> > 1.0 ml/ min 2 %
Flow range 0.001 to 9.999 ml/ min
Pressure pulse ≤ 0.5%
Conductivity detector
Type Temperature Control and Bipolar Conductivity Detector
Detection mode Bipolar conductivity detection
Cell volume ≤ 0.8 µL
Detection range 0 to 45000 µS/ cm
Detection resolution ≤ 0.0020 nS/ cm
Output voltage - 6000 to +6000 mV (adjustable)
Baseline noise ≤ 0.05 % F.S.
Baseline drift ≤ 3 % FS/ 30 min
Operating temperature range Room temperature +5 to 60°C (41 to 140°F)
Controlling temperature accuracy ± 0.01°C
Maximum pressure 10 MPa
Linear range ≥ 103
Instruments linearity ≥ 0.999
Quantitative repeatability ≤ 1.0 %
Qualitative repeatability ≤ 1.0 %
Minimum detectable concentration Cl ≤ 0.0005 ug/ ml<br/> BrO3 ≤ 0.001 ug/ ml<br/> Li+ ≤ 0.001 ug/ ml
Flow system
Plastic flow path Made of PEEK materials
Six way Valve PEEK material, 5000 psi pressure, independent automatic collection and flow function
Power supply 150 W
Ion Chromatographic Pump
Type High pressure and low pulse double plunger tandem advection pump
Maximum pressure 35 MPa (PEEK)
Pressure display accuracy ≤ 0.1 MPa
Flow stability (0.2 to 0.5) ml/ min ≤ 3 %<br/> (0.5 to 1.0) ml/ min ≤ 2 %<br/> > 1.0 ml/ min 2 %<br/>
Flow range 0.001 to 9.999 ml/ min
Pressure pulse ≤ 0.5%
Conductivity detector
Type Temperature Control and Bipolar Conductivity Detector
Detection mode Bipolar conductivity detection
Cell volume ≤ 0.8 µL
Detection range 0 to 35000 µS/ cm
Detection resolution ≤ 0.0020 nS/ cm
Output voltage - 6000 to +6000 mV (adjustable)
Baseline noise ≤ 0.05 % F.S.
Baseline drift ≤ 3 % FS/ 30 min
Operating temperature range Room temperature +5 to 60°C (41 to 140°F)
Controlling temperature accuracy ± 0.01°C
Maximum pressure 10 MPa
Linear range ≥ 103
Instruments linearity ≥ 0.999
Quantitative repeatability ≤ 1.0 %
Qualitative repeatability ≤ 1.0 %
Minimum detectable concentration Cl ≤ 0.0005 ug/ ml<br/> BrO3 ≤ 0.001 ug/ ml<br/> Li+ ≤ 0.001 ug/ ml
Flow system
Plastic flow path Made of PEEK materials
Six way Valve PEEK material, 5000 psi pressure, independent automatic collection and flow function
Degassing Device
Inner volume 300 µl
Degassing volume 7.5 ml
Maximum flow rate 10 ml/ min
Degassing efficiency Degassing 90 % at 1ml/ min
Organic tolerance 1
Oven
Maximum capacity 22 L
Temperature range RT + 5 ℃ to 400 ℃
Temperature accuracy ± 0.1 ℃
Temperature program 9-phase/ 10 platform
Program total time 9999.9 min
Maximum temperature heating rate 0.1 to 60 ℃/ min
Maximum cooling rate ˂ 10 mins (250 to 50 ℃)
Sample injector
Temperature range RT+ 7 ℃ to 420 ℃
Temperature control Automatic
Injector type Column or split
Maximum sample inlet 3 pcs
Carrier gas flow type Constant pressure
Pre column pressure range 0 to 400 kPa
Pre column pressure accuracy 0.1 kPa
Mobile phase flow range H2: 0 to 200 ml/min, N2: 0 to 150 ml/min
Detector
Temperature range RT + 7 ℃ to 420 ℃
Maximum installation Dual detector
Flame ignition mode Automatic
Flame Ionization Detector (FID) Logarithmic amplifier <br/> High voltage switch control <br/> Baseline signal display <br/> Ignition coil control <br/> Detection limit: ≤3 ×10 to 12 g/s (Sample: n-hexadecane) <br/> Baseline noise: ≤ 5 × 10 <sup> - 14 </sup> A <br/> Baseline draft: ≤ 6 × 10 <sup> -13 </sup> A <br/> Dynamic range: 10 <sup> 7 </sup> <br/> RSD: ≤ 3 %
Power supply AC 220 V ± 22 V, 50 Hz ± 0.5 Hz, 3000 W
Chromatographic Pump
Type High-pressure and low –pulse double plunger tandem advection pump
Maximum Pressure 35 MPa (PEEK)
Flow Range 0.001 to 9.999 mL/min
Flow accuracy ± 0.5 %
Flow Repeatability RSD ≤ 0.1%
Flow stability (0.2 to 0.5) mL/min, ≤ 3 %<br/> (0.5 to 1.0) mL/min, ≤ 2 %<br/> >1.0 mL/min, ≤ 2 %
Built-in Heat conduction type column heater
Temperature range Room temperature +5°C to 60°C (41 to 140°F)
Allowable deviation ± 1°C
Temperature stability ≤ 0.5°C/h
Electromagnetic injection valve
Maximum pressure 35 MPa
Control mode By stepper motor
Power supply 24 V (DC)
Digital and temperature control detection system
Type Temperature control and bipolar conductivity detector
Detection type Bipolar conductivity detection
Cell volume ≤ 0.8 µL
Measurement range 0 to 45000 µ S/cm (adjustable)
Detection resolution ≤ 0.0020 nS/cm
Output voltage -6000 to 6000 mV (adjustable)
Temperature range Room temperature +5°C to 60°C (41 to 140°F)
Temperature accuracy ± 0.01°C
Maximum pressure 10 MPa
Baseline drift ≤ 20 % FS/30 min
Baseline noise ≤0.5 % FS
Instrument linearity ≥ 0.999
Quantitative Repeatability ≤0.5 %
Qualitative Repeatability ≤2 %
Minimum detectable concentration Cl-≤0.005 µg/mL<br/> Li+ ≤0.005 µg/mL
Ion Chromatographic pump
Type High pressure and low pulse double plunger tandem advection pump
Maximum pressure 35 MPa (PEEK)
Display pressure accuracy ≤ 0.1 MPa
Flow stability (0.2 to 0.5) ml/ min ≤ 3 % , (0.5 to 1.0) ml/ min ≤ 2 %, > 1.0 ml/ min ≤ 2 %
Flow range 0.001 to 9.999 ml/ min
Pressure pulse ≤ 0.5 %
Numerical control and electromagnetic injection
Maximum pressure 35 MPa
Contact material of the rotor PEEK
Control mode By Stepper motor
Power supply DC 24 V
Column heater
Operating temperature range Room temperature 20 to 60°C ( 68 to 140°F)
Controlling temperature accuracy ± 0.01°C
Allowable deviation of column heater temperature ± 2°C
Temperature stability ≤ 1°C/ h
Flow system
Plastic flow path Made up of PEEK material
Six way valve PEEK material pressure 5000 psi, independent automatic collection and flow function
Ion Chromatographic Pump
Type High pressure and low pulse double plunger tandem advection pump
Maximum pressure 35 MPa (PEEK)
Pressure display accuracy ≤ 0.1 MPa
Flow stability (0.2 to 0.5) ml/ min ≤ 3 %<br/> (0.5 to 1.0) ml/ min ≤ 2 %<br/> > 1.0 ml/ min 2 %<br/>
Flow range 0.001 to 9.999 ml/ min
Pressure pulse ≤ 0.5%
Conductivity detector
Type Temperature Control and Bipolar Conductivity Detector
Detection mode Bipolar conductivity detection
Cell volume ≤ 0.8 µL
Detection range 0 to 35000 µS/ cm
Detection resolution ≤ 0.0020 nS/ cm
Output voltage - 6000 to +6000 mV (adjustable)
Baseline noise ≤ 0.05 % F.S.
Baseline drift ≤ 3 % FS/ 30 min
Operating temperature range Room temperature +5 to 60°C (41 to 140°F)
Controlling temperature accuracy ± 0.01°C
Maximum pressure 10 MPa
Linear range ≥ 103
Instruments linearity ≥ 0.999
Quantitative repeatability ≤ 1.0 %
Qualitative repeatability ≤ 1.0 %
Minimum detectable concentration Cl ≤ 0.0005 ug/ ml<br/> BrO3 ≤ 0.001 ug/ ml<br/> Li+ ≤ 0.001 ug/ ml
Flow system
Plastic flow path Made of PEEK materials
Six way Valve PEEK material, 5000 psi pressure, independent automatic collection and flow function
Degassing Device
Inner volume 300 µl
Degassing volume 7.5 ml
Maximum flow rate 10 ml/ min
Degassing efficiency Degassing 90 % at 1ml/ min
Organic tolerance 1
Ion Chromatographic Pump
Type High pressure and low pulse double plunger tandem advection pump
Maximum pressure 35 MPa (PEEK)
Pressure display accuracy ≤ 0.1 MPa
Flow stability (0.2 to 0.5) ml/ min ≤ 3 %<br/> (0.5 to 1.0) ml/ min ≤ 2 %<br/> > 1.0 ml/ min 2 %
Flow range 0.001 to 9.999 ml/ min
Pressure pulse ≤ 0.5%
Conductivity detector
Type Temperature Control and Bipolar Conductivity Detector
Detection mode Bipolar conductivity detection
Cell volume ≤ 0.8 µL
Detection range 0 to 45000 µS/ cm
Detection resolution ≤ 0.0020 nS/ cm
Output voltage - 6000 to +6000 mV (adjustable)
Baseline noise ≤ 0.05 % F.S.
Baseline drift ≤ 3 % FS/ 30 min
Operating temperature range Room temperature +5 to 60°C (41 to 140°F)
Controlling temperature accuracy ± 0.01°C
Maximum pressure 10 MPa
Linear range ≥ 103
Instruments linearity ≥ 0.999
Quantitative repeatability ≤ 1.0 %
Qualitative repeatability ≤ 1.0 %
Minimum detectable concentration Cl ≤ 0.0005 ug/ ml<br/> BrO3 ≤ 0.001 ug/ ml<br/> Li+ ≤ 0.001 ug/ ml
Flow system
Plastic flow path Made of PEEK materials
Six way Valve PEEK material, 5000 psi pressure, independent automatic collection and flow function
Power supply 150 W
Gas Chromatography Specifications
Model No GC-87
Flow rate 1 ~ 1.5 ml / min
Maximum flow rate 10 ml / min
Inlet temperature 450 °C
Pressure range 0 ~ 100 psi
Heating rate Upto 120 °C / min
Room temperature 4 °C ~ 450 °C
Pressure control mode Electronic pressure control ( Supports CV and CC )
Split mode Split / split less
Split ratio 1000 : 1
Temperature programming 7 stages / 8 platforms
Auto sampler Optional
Mass Spectrometry Specifications
Model No MS-89
Mass range 1.5 ~ 1000 amu
Ion – source temperature 100 °C ~ 350 °C
GC-MS interface temperature 450 °C
Scan rate Upto 10000 amu/s
Stability ± 0.10 amu / 48 hrs.
Filament emission current 0 ~ 350 µA
EI source ionization energy 5 eV ~ 250 eV
Resolution Unit resolution
Detector High energy dynode electron multiplier
Sensitivity Full scan ( S / N is ≥ 30 : 1 )
Vacuum Turbo molecular pump ( 67 L/s )