Temperature and Humidity Test Chamber LTHC-B30

Temperature and Humidity Test Chamber LTHC-B30

Temperature and Humidity Test Chamber LTHC-B30 designed with 3150 L internal capacity volume. Structured with -40°C to 150°C temperature range, and 10% to 98% RH humidity range to stimulate constant temperature and humidity conditions for testing wide variety of products for their quality, performance, shelf life and stability. The front panel features LCD screen, separate indicator lamp meant for high and low water level, emergency stop button, water level indicator, besides design also offers stainless steel durable door with glass window, 02 pcs of adjustable stainless steel shelves, 1 pc of 100 mm diameter hole, castors at base for easy movement of the unit. A good temperature humidity chamber is essential for evaluating potential success or failure of a product in the field.

View Catalog
Capacity 3150 L
Temperature range -40℃ to 150℃
Temperature cooling rate 1℃ / min
Temperature heating rate 1℃ / min
Temperature fluctuations ± 0.5℃
Temperature deviation ± 2.0℃
Heating Power 1000 W
Humidity range 10% to 98% RH
Humidity deviation ± 2.5 % RH
Cooling system French TECUMSEH Compressor, R449A, R508B Refrigerant, Mechanical compression refrigeration system
Heating Element Nichrome Wire
Display PID Touch color LCD screen controller
Humidity Automatic water supply, water purification system, Humidification: Stainless steel surface evaporation humidifier, external evaporation, Dehumidification: Evaporator
Temperature sensor PT-100 platinum resistance, A class, Temperature sensor
Humidity sensor Dry and wet bulb sensor
Built-in water tank 270×300×450 mm
View window size 330×370 mm
Air circulation Centrifugal wind fan
Thermal insulation 10 cm Polyurethane foam and insulation cotton
Exterior Material Steel plate with protective coating
Interior Material SUS304 stainless steel
Standard configuration 1 cable hole (50 mm diameter) with plug, 02 adjustable shelves
Power supply 380 V, 50 Hz
Maximum Noise 65 dBA
External Environmental condition 5°C to 35°C, ≤ 85% RH
Internal dimension (D×W×H) 1500×1500×1400 mm
Overall dimension (D×W×H) 2050×2050×2350 mm
  • Structured with -40°C to 150°C temperature range, and 10% to 98% RH humidity range
  • Easy to use LCD touch screen controller and a graphic display to allow monitoring of the set and actual working parameters
  • 304 stainless steel, rust-proof interior chamber material with mirror surface
  • 02 pcs of adjustable stainless steel perforated shelves for good air circulation
  • Standard 50 mm diameter test cable hole located on left side of the workroom with inside sleeve to prevent moisture, and soft silicone plug seal
  • Double layer 8 cm insulating tempered glass window, prevents frosting, built-in LED light of work room helps in clear observation of sample through window
  • PID microprocessor colour touch screen controller
  • Good water circulation system, yearly replacement of filter
  • Automatic water inlet, with 13.5 mm diameter, standard 2 meter drain
  • High and low water level alarm, water shortage lights and sound
  • A3 steel plate with galvanized coating
  • Ethernet of PC link, USB to download test data, editing of 120 programs 100 segment
  • Four casters with brakes, and adjustable height, for easy movement
  • 10 cm thick polyurethane foam and insulation cotton for better performance

Temperature and Humidity Test Chamber used in basic and advanced research, quality and stability testing across pharmaceutical and cosmetic industries, chemical industry, packaging industry, food and beverage industry.

Wet wick for humidity sensor- 1 pc
Relay- 2 pc
PT-100 Temperature sensor- 2 pc
High and low water level float- 2 pcs
Heating tube- 1 pc

Related Products

Products you may like