Petroleum Testing

Acid and Alkali Tester Aniline Test Equipment Ash Content Tester Automatic Bomb Calorimeter Automatic Dielectric Tester Automatic Softening Point Tester Automatic Tag Closed Flash Point Tester Automatic Thermogravimetric Analyzer Closed Cup Flash Point Tester Constant Temperature Needle Penetration Tester Demulsibility Characteristics Tester Density Tester Distillation Tester Dropping Point Tester Engler Viscometer Existent Gum Tester Foaming Characteristics Tester Kinematics Viscometer Low Temperature Tester Mercaptan Sulfur Tester Octane Number & Cetane Number Tester Open Cup Flash Point Tester Other Instrument Oxidation Stability Tester Oxygen Bomb Calorimeter Penetrometer Residue Carbon Rotational Viscometer Rust and Corrosion Tester Specific Gravity Tester Sulphur Content Tester Vapor Pressure Water Content Tester
Acid Number and Acidity Tester LAAT-A11
Acid Number and Acidity Tester LAAT-A11
Ambient temperature ≤ 35 °C
Relative humidity ≤ 85 %
Precision of titration tube Scale division is 0.02 ml
Total power consumption ≤ 1200 W
Power supply AC 220 V ± 10 %, 50 Hz
Acid Number Tester LAAT-A12
Acid Number Tester LAAT-A12
Measurement range ≥0.05 mg KOH/g
Potential measurement range 0 to 1800.0 mV
Burette volume 10 mL
Minimum titration volume 0.001 ml
Burette precision ±0.1 %FS
Aniline Point Tester LAPT-A10
Aniline Point Tester LAPT-A10
Measurement range Room temperature ~ 150°C
Stirring speed 0 ~ 1200 r / min
Heating power 25 W
Interior Dimension 360 × 250 × 545 mm
Exterior Dimension 370 × 320 × 630 mm
Aniline Point Tester LAPT-A11
Aniline Point Tester LAPT-A11
Temperature controlling accuracy ≤ 0.5 ℃
Temperature controlling range Room temperature ~ 200 ℃
Power supply for illumination 5 V
Power of motor 2 kW
Ash Content Tester LACT-A10
Ash Content Tester LACT-A10
Electric Muffle Furnace
Controlled temperature 775 ±25 ℃
Temperature rising time of empty chamber ≤ 50 min
Furnace temperature uniformity ≤ 15℃
Internal dimension 200 × 120 × 80 mm
External dimension 490 × 490 × 450 mm
Power consumption 2.5 kW
Power supply AC 220V ±10%, 50 Hz
Net weight 35 kg
Temperature controller
Maximum control temperature 1200 ℃
Dimension 500 × 300 × 235 mm
Power consumption 5000 W
Power supply AC 220±10% V, 50Hz
Net weight 5 kg
Electric heating plate
Heating power (1 to 6) grades, continuously adjustable
Temperature 400℃
Diameter of heating plate Φ 180 mm
Dimension 280 × 250 × 90 mm
Power consumption 2000 W
Power supply AC 220±10%V, 50Hz
Automatic Bomb Calorimeter LABC-A10
Automatic Bomb Calorimeter LABC-A10
Calorimeter type Isoperibol
Temperature range 5 to 40°C
Measurement range 5 to 40 MJ/ kg
Operation Mode The outer barrel temperature is constant
Temperature resolution 0.0001°C
Automatic Bomb Calorimeter LABC-A11
Automatic Bomb Calorimeter LABC-A11
Calorimeter type Isoperibol
Temperature range 5 to 40°C
Measurement range 5 to 40 MJ/ kg
Operation Mode A. Outer barrel temperature follows room temperature change mode Or B. Outer barrel temperature constant mode
Temperature resolution 0.0001°C
Automatic Bomb Calorimeter LABC-B10
Automatic Bomb Calorimeter LABC-B10
Calorimeter type Isoperibol
Oxygen filling Fully automatic oxygen filling & releasing, fully automatic bomb raising & lowering
Bomb volume 250 ml
Analysis time < 8 min full test process: <10 min
Bomb washing Manual
Automatic Bomb Calorimeter LABC-B11
Automatic Bomb Calorimeter LABC-B11
Calorimeter type Isoperibol
Oxygen filling Semi-automatic
Bomb volume 282 ml
Analysis time 15 to 25 min
Bomb washing Manual
Automatic Cleveland Open Cup Flash Point Tester LOFP-A12
Automatic Cleveland Open Cup Flash Point Tester LOFP-A12
Ambient Temperature 10 ℃ ~ 40 °C
Relative Humidity ≤ 80 %
Temperature Measurement- Full Scale Ambient temperature to 300 °C
Temperature Measurement- Repeatability ≤ 8 °C
Temperature Measurement- Reproducibility ≤ 16 °C
Automatic COC Flash & Fire Point Tester LOFP-B10
Automatic COC Flash & Fire Point Tester LOFP-B10
Ambient Temperature 10 ℃ ~ 40 ℃
Relative Humidity ≤ 85 %
Temperature Measurement- Full Scale Ambient temperature to ~ 400 ℃
Temperature Measurement- Repeatability ≤ 4 ℃
Test accuracy 0.005
Automatic Dielectric Tester LADT-A10
Automatic Dielectric Tester LADT-A10
Capacity 2.0 kVA
Speed of voltage increase 2 k V/ s
Voltage inspection accuracy 0.01
Breakdown sensitivity < 0.1 kV
Waveform distortion ≤ 1 %
Automatic Distillation Apparatus LADA-A10
Automatic Distillation Apparatus LADA-A10
Heating power 2 kW
Cooling power 0.5 kW
Steam temperature 0 to 400℃
Oven temperature 0 to 500℃
Refrigeration temperature 0 to 60℃
Automatic Lubricating Oils Oxidation Stability Tester LOST-D10
Automatic Lubricating Oils Oxidation Stability Tester LOST-D10
Samples 2
Oil bath cubage 30 L
Angle between bomb and water surface 30 °
Speed of rotary assembly 100 ± 5 RPM
Pressure sensor 0 to 1.6 Mpa; Accuracy: ±2%
Automatic PMCC Flash Point Tester LCFP-A11
Automatic PMCC Flash Point Tester LCFP-A11
Ambient temperature 10 °C ~ 40 °C
Relative humidity ≤ 80 %
Measurement Range Ambient Temperature ~ 250 °C
Flash Point Lower than 104 °C , error is 2 °C; Higher than 104 °C , error is 6 °C
Resolution 0.1 °C
Automatic PMCC Flash Point Tester LCFP-A13
Automatic PMCC Flash Point Tester LCFP-A13
Ambient temperature 10 °C ~ 40 ℃
Relative humidity ≤ 80 %
Ignition Mode electron igniter / gas flame
Temperature range Room Temperature ~ 300 ℃
Measurement Range Room Temperature ~ 300 ℃
Automatic Pour Point Tester LLTT-A23
Automatic Pour Point Tester LLTT-A23
Ambient temperature ≤ 30 ℃
Refrigeration speed > 40 °C / 10 min
Repeatability for solidifying point ≤ 2 °C
Repeatability for pour point ≤ 3 °C
Reproducibility ± 4 °C
Automatic Softening Point Tester LSPT-A10
Automatic Softening Point Tester LSPT-A10
Measurement range 32 ℃ to 160 ℃
Ambient temperature 35 °C
Temperature resolution 0.01 ℃
Beaker volume 1000 mL
Relative humidity ≤85%
Automatic Tag Closed Flash Point Tester LACF-A10
Automatic Tag Closed Flash Point Tester LACF-A10
Experimental temperature range -50 to 70°C
Test sample volume 50 ml
Ambient temperature range 10 to 40°C
Humidity ≤ 85%
Ignition gas source Pipelined gas or LPG
Automatic Thermogravimetric Analyzer LTGA-A10
Automatic Thermogravimetric Analyzer LTGA-A10
 Temperature range Room temperature to 1000 ºC
Temperature resolution 0.1 ºC
Temperature fluctuation ±0.1 ºC
Heating rate 1 ~ 80 ºC / min
Cooling time 15min  (1000ºC ~ 100ºC)
Base Number Tester LAAT-A13
Base Number Tester LAAT-A13
Volumetric analysis Titration condensation: 0.1 N;
Controlling accuracy: ≤ ± 0.02 ml
Automatic acid titration Titration condensation: 0.1 N;
Controlling accuracy: ≤ ± 0.1 pH
Automatic potential control Titration condensation: 0.1 N;
Controlling accuracy: ≤ 10 mV
Ambient temperature 0 ~ 35 ℃
Relative humidity ≤ 85 %
Benzene Distillation Tester (Low Temperature) LDT-A11
Benzene Distillation Tester (Low Temperature) LDT-A11
Ambient temperature -10°C to 35°C
Relative humidity ≤ 85 %
Thermometer Each one for 70°C to 90°C , 100°C to120°C , and 125°C to 150°C
Scale division 0.1 ℃
Total length 8000 mm
Carbon Residue Tester (CONRADSON METHODS) LRCT-B10
Carbon Residue Tester (CONRADSON METHODS) LRCT-B10
Porcelain crucible 30 ml
Inner iron crucible 75 ml
Outer iron crucible 190 ml
Burner Mig Burner
Dimensions 400 x 380 x 270 mm
Carbon Residue Tester (Digital Temperature Controlled Electric Furnace Methods) LRCT-B11
Carbon Residue Tester (Digital Temperature Controlled Electric Furnace Methods) LRCT-B11
Bath type Four holes with a furnace
Heating type Electric resistance furnace
Temperature controlling range 0 ~ 520 °C
Temperature controlling accuracy ± 5 °C
Relative humidity ≤ 85 %
Carbon Residue Tester (Ramsbottom) LRCT-B20
Carbon Residue Tester (Ramsbottom) LRCT-B20
Coking furnace Metal furnace
Heating mode Electric heating
Test unit 5 units
Temperature range Ambient to 550°C
Temperature precision ≤ ± 5℃
Cleveland Open Cup Flash Point Tester LOFP-A11
Cleveland Open Cup Flash Point Tester LOFP-A11
Thermometer 6 ℃ ~ 400 ℃
Scale Division 2 °C
Spout Aperture 0.6 ~ 0.8 mm
Ambient Temperature -10 ℃ ~ 50 ℃
Relative Humidity ≤ 85 %
Color Tester LCT-A20
Color Tester LCT-A20
Light source 220 V, 100 W
Temperature of grinding milk white light bulb 2750 ± 50 K
Light hole( Φ14) 26 pieces
Color comparing tube Φ32 mm
Dimension 440 x 420 x 340 mm
Constant Temperature Needle Penetration Tester LTNP-A10
Constant Temperature Needle Penetration Tester LTNP-A10
Measuring range 0 to 700 taper degree (digital display table 0-70 mm)
Timing device Timing error is less than ±0.1 s
 Resolution 0.01 mm
Needle insertion accuracy ±1 cone insertion degree
Temperature range 10 to 50˚C
Copper Strip Corrosion Tester LRCT-A13
Copper Strip Corrosion Tester LRCT-A13
Sample hole 4 pieces
Sample quantity 4 to 12 pieces
Ambient temperature Room temperature to 35 °C
Temperature controlling range Room temperature to 100°C
Temperature controlling accuracy ± 1°C
Coulometric Karl Fischer Titrator LWT-A30
Coulometric Karl Fischer Titrator LWT-A30
Ambient Temperature 10°C to 35°C
Measurement Range 0 to 100 mg
Resolution 0.1 µg
Max. Electrolysis Speed 40 µg /s
Amount and Precision of electrolysed water 10 µg to 1000 µg, ± 2 µg and >1000 µg, 0.2 %
Coulometric Karl Fischer Titrator LWT-A31
Coulometric Karl Fischer Titrator LWT-A31
Maximum current 400 mA
Measurement range 3 µg to 9999.9 µg
Resolution 0.1 µg
Precision 1 ± 2 µg (3µg H2O to 20µg H2O)
Precision 2 ± 3 µg (20µg H2O to 100µg H2O)
Crude Petroleum Water Content Tester LWT-B10
Crude Petroleum Water Content Tester LWT-B10
Ambient Temperature Range -10 to 35°C
Relative Humidity ≤85%
Distillation Flask 1000 ml
Receiver 5 ml, with 0.05 ml graduation
Condenser 400 mm with ± 5 mm accuracy
Dark Petroleum Products Sulphur Content Tester (Tubular Oven Method) LST-A11
Dark Petroleum Products Sulphur Content Tester (Tubular Oven Method) LST-A11
Air flow rate Not less than 150 L / h
Max. Preset time 99 min 59 s (100 min)
Chamber diameter of oven Φ22 mm
Heating power of oven 1400 W × 2
Max. Temperature of oven 950 °C
Density Tester LDMT-A10
Density Tester LDMT-A10
Cubage of bath Ф300 × 380 mm
Temperature controlling range 0 °C ~ 100 °C
Temperature controlling accuracy ± 0.2 °C
Temperature sensor Industrial platinum resistance, Pt100
Thermometer Total immersion mercury thermometer
Distillate Fuel Cold Filter Plugging Point Filter LLTT-A12
Distillate Fuel Cold Filter Plugging Point Filter LLTT-A12
Ambient temperature (-10)℃ ~ 35 ℃
Relative humidity ≤ 85 %
Sample cup Inner diameter 31.0 ~ 32.0 mm
Sample cup Wall thickness 1.0 ~ 1.5 mm
Sample cup Height 115 ~ 125 mm
Distillate Fuel Oil Oxidation Stability Tester LOST-D12
Distillate Fuel Oil Oxidation Stability Tester LOST-D12
Samples 8
Temperature 100 ℃
Temperature controlling accuracy 0.1 ℃
Flow meter 3 ± 0.3 L / H oxygen
Power supply 220 V ± 10 %, 60 Hz
Distillation Tester (low temperature Double units) LDT-A16
Distillation Tester (low temperature Double units) LDT-A16
Graduated flasks 100 ml
Distillation flask 125 ml
Ambient temperature ≤ 35 °C
Relative humidity ≤ 85 %
Temperature controlling accuracy ± 0.5 °C
Distillation Tester (low temperature single unit) LDT-A17
Distillation Tester (low temperature single unit) LDT-A17
Graduated flasks 100 ml
Distillation flask 125 mL
Ambient temperature ≤ 30 °C
Relative humidity ≤ 85 %
Temperature controlling range 0 °C to 60 °C
Distillation Tester Dual Units LDT-A15
Distillation Tester Dual Units LDT-A15
Graduated flasks 100 ml
Scale division of graduated flask 1ml
Distillation flask 125 ml
Ambient temperature ≤ 35 °C
Relative humidity ≤ 85 %
Distillation Tester Front Type LDT-A14
Distillation Tester Front Type LDT-A14
Distillation flask 125 mL
Ambient temperature Room temperature to 35 °C
Relative humidity ≤ 85 %
Thermometer (-2 )°C to 300 ℃ and (-2) °C to 400 ℃
Division value 1℃
Distillation Tester LDT-A10
Distillation Tester LDT-A10
Graduated flasks 10 ml and 100 ml
Scale division of graduated flask 10 ml is 0.1 ml and 100 ml is 1 ml
Ambient temperature (-10) °C ~ 35 °C
Relative humidity ≤ 85 %
Thermometer 0 °C ~ 360 °C
Distillation Tester LDT-A12
Distillation Tester LDT-A12
Graduated flasks 100 ml
Scale division of graduated flask 1 ml
Outer diameter of distillation flask φ65
Refrigeration tube φ14
Length of refrigeration tube 560 mm
Dropping Point Tester (Air bath) LDPT-A11
Dropping Point Tester (Air bath) LDPT-A11
Ambient temperature ≤ 35 ℃
Relative humidity ≤ 85 %
Heating power of electric furnace 250 W × 2
Total power consumption ≤ 700 W
Power supply AC 220 V ± 10 %, 50 Hz
Dropping Point Tester (Oil Bath) LDPT-A10
Dropping Point Tester (Oil Bath) LDPT-A10
Beaker quantity 600 ml
Ambient temperature (-10) °C ~ 40 °C
Relative humidity ≤ 85 %
Thermometer Measurement range (-5) °C ~ 300 °C
Thermometer Scale division 1 °C
Engler Viscometer LEV-A10
Engler Viscometer LEV-A10
Graduated Flask 200 ± 0.2 ml
Standard Water Value 51 ± 1 s
Temperature Range 0 ~ 100 °C
Temperature Controlling Accuracy ± 0.2 °C
Accuracy Of Timer 0.01 s
Engler Viscometer LEV-A11
Engler Viscometer LEV-A11
Graduated Flask 100 ml
Standard Water Value 51 ± 1 s
Temperature Range 0 ~ 100 °C
Temperature Controlling Accuracy ± 0.1 °C
Accuracy Of Timer 0.01 s
Engler Viscometer LEV-B10
Engler Viscometer LEV-B10
Graduated Flask 200 ± 0.2 ml (50 ± 0.2 ml for bituminous materials)
Standard Water Value 51 ± 1 s
Temperature Range 0 ~ 100 °C
Ambient Temperature 10 °C ~ 40 °C
Temperature Controlling Accuracy ± 0.1 °C
Existent Gum Tester LEGT- B30
Existent Gum Tester LEGT- B30
Bath type Oil bath
Bath capacity 5000 ml ± 50 ml
Ambient temperature Room temperature to 35 °C
Relative humidity ≤ 85 %
Temperature controlling range RT to 250 °C
Existent Gum Tester LEGT- B31
Existent Gum Tester LEGT- B31
Evaporation bath type and size Aluminum block bath, φ260 × 130 mm
Holes for testing 3 pieces
Size of holes for testing cylinder φ51 × 70 mm
Flow rate display Flow meter
Working temperature 60 ℃ to 165 ℃
Existent Gum Tester LEGT- B32
Existent Gum Tester LEGT- B32
Evaporation bath type and size Aluminum bath φ260 × 130 mm
Holes for testing 5 pieces
Size of holes for testing cylinder φ51 × 70 mm
Working temperature 160 ℃ ~ 165℃
Working pressure for decompression valve 0.07 MPa
Foaming Characteristics Tester LFCT-A10
Foaming Characteristics Tester LFCT-A10
Temperature Range Ambient to 100°C
Temperature Precision ± 0.1°C
Air Flow 94 mL ± 5 mL/min, with flowmeters
Timing Unit 0 to 99 min 59 s, resolution 1 s
Control System Single chip microcontroller
Freezing Point Tester LLTT-A11
Freezing Point Tester LLTT-A11
Freezing point range -54°C to 2°C
Cold bath measurement temperature range -70° to 20°C
Temperature controlling accuracy ±0.5°C
Bath liquids stirring Electric
Bath liquids stirring range 1200 r/min
Gasoline Oxidation Stability Tester LOST-D13
Gasoline Oxidation Stability Tester LOST-D13
Type Compact; Desktop
Design Integrated
Bath Metal bath (without water usage)
Temperature control point of metal bath 100℃ ± 1℃
Ambient temperature ≤ 30℃
Insulating Oil Breakdown Voltage Tester LIBT-A23
Insulating Oil Breakdown Voltage Tester LIBT-A23
Power supply AC 220 V ± 5 % , 50Hz
Measurement range 0 ~ 75 kV
Voltage rising rate 3 kV ± 10 % / s
Distance between electrodes 2.5 mm
Output power 2 kVA
Kinematics Viscometer LKV-A10
Kinematics Viscometer LKV-A10
Ambient temperature 15 to 35°C
Relative humidity ≤ 85%
Capillary viscometer 6 capillary Pinkevitch viscometer tubes
Stirring motor 1200 rpm
Temperature range Ambient to 100°C
Kinematics Viscometer LKV-A11
Kinematics Viscometer LKV-A11
Ambient temperature (-10) °C ~ 35 °C
Relative humidity ≤ 85 %
Capillary viscometer 11 pieces
Stirring motor 6 W, 1200 rpm
Temperature controlling accuracy ± 0.1 °C
Kinematics Viscometer LKV-A12
Kinematics Viscometer LKV-A12
Ambient temperature (-10) °C ~ 35 °C
Relative humidity ≤ 85 %
Capillary viscometer 11 pieces
Stirring motor 6 W, 1200 rpm
Temperature controlling range Ambient temperature ~ 100 °C
Kinematics Viscometer LKV-A13
Kinematics Viscometer LKV-A13
Ambient temperature (-10) °C ~ 35 °C
Relative humidity ≤ 85 %
Capillary viscometer 7 pieces of Cannon-Fenske reserve-flow capillary viscometer tubes in a group
Stirring motor 6 W, 1200 rpm
Sample quantity 3 piece at the same time
Kinematics Viscometer LKV-A15
Kinematics Viscometer LKV-A15
Ambient temperature (-10) °C ~ 35 °C
Relative humidity ≤ 85 %
Capillary viscometer 11 pieces
Stirring motor 6 W, 1200 rpm
Sample quantity 4 piece at the same time
Kinematics Viscometer LKV-A16
Kinematics Viscometer LKV-A16
Ambient temperature 0 ~ 40 ºC
Relative humidity 20 ~ 90 %, RH while 40 ℃
Temperature controlling accuracy ± 0.1 °C
Timing range 0.0 s ~ 9999.9 s
Barometric 96 ~ 103 kPa
Liquefied Petroleum Gas Copper Corrosion Tester LRCT-A10
Liquefied Petroleum Gas Copper Corrosion Tester LRCT-A10
Sample hole 2 pieces
Speed of stirring motor 1400 rpm
Ambient temperature 10 to 35°C
Temperature controlling range Room Temperature to 100°C
Temperature controlling accuracy ± 0.5°C
Low Temperature Kinematic Viscosity Tester LKV-A14
Low Temperature Kinematic Viscosity Tester LKV-A14
Ambient temperature ≤ 30 °C
Relative humidity ≤ 85 %
Capillary viscometer 13 pieces
Stirring motor 6 W, 1200 rpm
Temperature controlling range Ambient temperature ~ 70 °C
Lubricating Oil Rust Characteristics Tester LRCT-A11
Lubricating Oil Rust Characteristics Tester LRCT-A11
Sample hole 4 pieces
Speed of stirring motor 1400 rpm
Speed for sample stirring 1000 ± 50 rpm
Ambient temperature Room temperature to 35°C
Temperature controlling range 0 to 100°C
Mechanical Impurity Tester (Weight Method) LMIT-A21
Mechanical Impurity Tester (Weight Method) LMIT-A21
Dimension 390 x 260 x 590 mm
Total power consumption ≤ 1200 W
Power supply AC 220 V ± 10 %, 50 Hz
Heating power of water bath 1000 W
Relative humidity ≤ 85 %
Mercaptan Sulfur Tester LMST-A10
Mercaptan Sulfur Tester LMST-A10
Potential measuring range (0 to ±1999.5) Mv
Intrinsic error 0.1 % ±0.5 mV
Input impedance Ri ≥1 × 1012 Ω
Burette capacity 10 mL
Burette accuracy  ±0.1 % (F•S)
Multifunctional Low Temperature Tester LLTT-A16
Multifunctional Low Temperature Tester LLTT-A16
Refrigeration system New-type refrigeration compressor
Controlling temperature of cold trough Cold trough I: 0 °C, ± 0.5 °C; Cold trough II: 0 °C, (-17) °C, ± 0.5 °C; Cold trough III: (-17) °C, (-34) °C, ± 0.5 °C; Cold trough IV: (-70) °C, ± 0.5 °C
Ambient temperature ≤ 30 ℃
Relative humidity ≤ 85 %
Dimensions 930 x 570 x 108 mm
Octane Number and Cetane Number Tester LOCT-A10
Octane Number and Cetane Number Tester LOCT-A10
 Measuring Range For Aviation Gasoline 86.0 to 105.0/MON
 Measuring Range For Gasoline For Motor Vehicles National standard: 65.0 to 110.0/RON
National-V standard: 70 to 115.0/RON
Blended gasoline: 75.0 to 120.0/RON
Light gasoline: 50.0 to 85.0 /MON
Isomerized gasoline: 85.0 to 120.0/RON
Arene gasoline: 90.0 to 120.0/RON
 Measuring Range For Ethanol E93: 92.0 to 95.0/RON
E97: 95.0 to 99.0/RON
Judgement: 60.0 to 120.0/RON
Measuring Range For Automobile Diesel Fuels Cetane number: 25 to 75/CN
Cetane index: 20 to 80/CI
Measuring Accuracy Aviation gasoline: ≤ ± 1.5/MON
Gasoline for motor vehicles: ≤ ± 1.5/RON, ≤ ± 1.5/MO
Automobile diesel fuels: ≤ ± 2.6/CN, ≤ ± 2.6/CI
Regression sample retest: ≤ ± 0.5/RON, ≤ ± 0.5/MON
Regression sample measurement: ≤ ± 1.5/RON, ≤ ± 1.5/MON
Calibration accuracy: ≤ ± 0.2/RON, ≤ ± 0.2/MON
Open Cup Flash Point Tester LOFP-A10
Open Cup Flash Point Tester LOFP-A10
Thermometer 0 ℃ ~ 360 °C
Scale Division 1 °C
Ambient Temperature ≤ 35 °C
Relative Humidity ≤ 85 %
Outer Crucible-Material Carbon structural steel
Oxidation Stability Tester (Lubricating Grease) LOST-D20
Oxidation Stability Tester (Lubricating Grease) LOST-D20
Temperature Range Ambient to 150℃
Temperature Precision ± 0.1°C
Test Unit 2 units
Heating Power 1800 W
Ambient Temperature (Room temperature to 35°C
Oxygen Bomb Calorimeter LBC-C20
Oxygen Bomb Calorimeter LBC-C20
Heat capacity 14000 ~ 15000 J / K
Temperature measurement range 10 ~ 35 ℃
Repeatability error ≤ 0.2 % (Grade C)
Endured pressure in oxygen bomb 20 MPa
Operation environment temperature 15 ~ 28 ℃
Oxygen Bomb Calorimeter LBC-C21
Oxygen Bomb Calorimeter LBC-C21
Temperature controlling range 10 ℃ ~ 35 ℃
Temperature resolution 0.001 ℃
Mean value of heat capacity 15 kJ / K
Ambient temperature 20 ℃ ± 5 ℃
Relative humidity ≤ 85 %
Oxygen Bomb Calorimeter LBC-C22
Oxygen Bomb Calorimeter LBC-C22
Temperature measurement range 10 ~ 35 ℃
Repeatability error ≤ 0.2 % (Grade C)
Endured pressure in oxygen bomb 20 MPa
Operation environment temperature 15 ~ 28 ℃
Temperature resolution 0.001 ℃
Penetrometer LMPT-A10
Penetrometer LMPT-A10
Measurement range 0 to 600 penetration scale
Timing controller 5 sec, 8 sec, 10 sec, 12 sec, 30 sec and 60 sec
Time accuracy ± 0.1 seconds
Resolution 0.01 mm
Penetration accuracy ± 1 penetration
Penetrometer LMPT-A11
Penetrometer LMPT-A11
Measurement range 0 to 600 penetration scale
Timing controller 5 sec or 60 sec
Time accuracy ± 0.1 seconds
Resolution 0.01 mm
Penetration accuracy ± 1 penetration
Penetrometer LMPT-A12
Penetrometer LMPT-A12
Penetrometer
Measurement range 0 to 600 penetration scale
Timing controller 5 sec or 60 sec
Time accuracy ± 0.1 seconds
Resolution 0.1 penetration
Penetration accuracy ± 1 penetration
Weight of standard needle 2.5 ± 0.05 g
Dimensions (W × L × H) 700 × 400 × 750 mm
Weight 30 kg
Circulatory Water Bath
Bath volume 3.5 L
Temperature range 5 °C to 60 °C
Temperature accuracy ± 0.1 °C
Circulatory water quantity 3 L/minute
Pump Lift 2 m
Power consumption 1200 W
Power supply AC 220V ± 10 %, 50 Hz
Dimensions (W × L × H) 600 × 400 × 650 mm
Weight 40 kg
Penetrometer LMPT-A13
Penetrometer LMPT-A13
Measurement range 0 to 600 penetration scale
Timing range 0 sec to 60 sec
Time accuracy error ≥ ± 0.1 seconds
Resolution 0.1 penetration
Power consumption 200 W
Petroleum Oils and Synthetic Fluids Demulsibility Characteristics Tester LDCT-A10
Petroleum Oils and Synthetic Fluids Demulsibility Characteristics Tester LDCT-A10
Ambient temperature Room temperature to 35 °C
Relative humidity ≤ 85 %
Timing range 1 s to 9 min 59 s
Temperature controlling range Room temperature to 99.9 °C
Temperature controlling accuracy ± 1 °C
Petroleum Oils and Synthetic Fluids Demulsibility Characteristics Tester LDCT-A11
Petroleum Oils and Synthetic Fluids Demulsibility Characteristics Tester LDCT-A11
Ambient temperature Room temperature to 35 °C
Relative humidity ≤ 85 %
Temperature controlling range Room temperature to 99.9 °C
Temperature controlling accuracy ± 1 °C
Stirring speed 1500 ± 15 rpm
Petroleum Products Vapor Pressure Tester(REID METHODS) LVPT-C11
Petroleum Products Vapor Pressure Tester(REID METHODS) LVPT-C11
Test bomb Two samples or a group of parallel samples
Bath temperature 37.8 °C
Temperature controlling accuracy 0.1 °C
Dimensions 500 × 560 × 680 mm, 950 × 540 × 720 mm
Heating power of water bath 1400 W
PMCC Flash Point Tester LCFP-A10
PMCC Flash Point Tester LCFP-A10
Ambient temperature ≤ 35 °C
Relative humidity ≤ 85 %
Temperature range 5 °C ~ 110 °C, Each scale division is 0.5 °C; 20 °C ~ 150 °C, Each scale division is 1.0 °C; 90 °C ~ 370 °C, Each scale division is 2 °C
Aperture of ignition device 0.8 mm
Standard oil cup-Inner diameter 50.7 ~ 50.8 mm
Portable Octane Number and Cetane Meter LOCT-A20
Portable Octane Number and Cetane Meter LOCT-A20
Measurement item motor gasoline and diesel
measurement unit of octane is ON 40 to 120
Permissible error of octane ± 0.5 max
Fluctuate range of octane ± 0.2 max
measurement unit of cetane is CN 20 to 100
Pour and Cloud Point Tester LLTT-A14
Pour and Cloud Point Tester LLTT-A14
Chamber quantity 2 chambers
Chamber 01 temperature control Ambient to -51 ℃
Chamber 02 temperature control Ambient to -65 ℃
Temperature precision ±1°C
Ambient temperature ≤ 30°C
Rotational Viscometer LRV-A10
Rotational Viscometer LRV-A10
Viscosity measurement range 10 ~ 2000000 MPa•s
Ambient temperature 5 °C ~ 35 °C
Ambient humidity Not more than 80 %
Spindles Four spindles of No.1 ~ 4
Spindle speed 0.3, 0.6, 1.5, 3, 6, 12, 30 and 60 rpm
Rust Characteristics and Corrosion Tester LRCT-A12
Rust Characteristics and Corrosion Tester LRCT-A12
Sample hole 4 pieces
Ambient temperature Room temperature to 35°C
Temperature controlling range 0 to 100°C
Temperature controlling accuracy ± 1°C
Relative humidity ≤ 85 %
Solidifying Point and Cold Filter Plugging Point Tester LLTT-A15
Solidifying Point and Cold Filter Plugging Point Tester LLTT-A15
Refrigeration system New-type refrigeration compressor
Controlling temperature of cold trough Cold trough I: RT ~ (-51) °C, ± 1°; Cold trough II:RT ~ (-80) °C, ± 1 °C
Ambient temperature ≤ 30 ℃
Relative humidity ≤ 85 %
Inner Dimensions 560 x 380 x 250 mm
Solidifying Point Constant Temperature Water Bath LLTT-A10
Solidifying Point Constant Temperature Water Bath LLTT-A10
Capacity 20 L
Temperature range Ambient +5°C to 100°C
Precision ± 0.1℃
Stirring range 1200 r/min
Heating Two grades
Solidifying Point Tester ('-20°C +80°C') LLTT-A22
Solidifying Point Tester ('-20°C +80°C') LLTT-A22
Temperature controlling accuracy ± 0.5 °C
Refrigeration system New-type refrigeration compressor
Cold trough One trough with two baths, temperatures in two baths are equal
Controlling temperature of cold trough Room temperature ~ (-70) °C
Temperature Range 20 °C ~ 80 °C
Solidifying Point Tester (Solidifying Point and Cold Filter Plugging Point) LLTT-A21
Solidifying Point Tester (Solidifying Point and Cold Filter Plugging Point) LLTT-A21
Refrigeration system New-type refrigeration compressor
Cold trough One trough with two baths, temperatures in two baths are equal
Controlling temperature of cold trough Room temperature ~ (-70) °C
Ambient temperature ≤ 30 ℃
Relative humidity ≤ 85 %
Solidifying Point Tester LLTT-A13
Solidifying Point Tester LLTT-A13
Temperature controlling accuracy ± 0.5 ℃
Refrigeration system New-type refrigeration compressor
Cold trough Two holes in one trough, and same temperature
Ambient temperature ≤ 30 ℃
Relative humidity ≤ 85 %
Solidifying Point Tester LLTT-A20
Solidifying Point Tester LLTT-A20
Temperature controlling accuracy ± 0.5 °C
Refrigeration system New-type refrigeration compressor
Cold trough One trough with two baths, temperatures in two baths are equal
Controlling temperature of cold trough Room temperature ~ (-70) °C
Ambient temperature ≤ 30 ℃
Specific Gravity Tester LSGT-A10
Specific Gravity Tester LSGT-A10
Vessel Volume  4000 ml × 2
Power of Vacuum pump 160 W
Negative power 3.7 kPa(27.75 mmHg)
Power of shaking machine 30 W
Power supply AC(220±10%)V, 50Hz
Transformer Oil Oxidation Stability Tester LOST-D11
Transformer Oil Oxidation Stability Tester LOST-D11
Samples 6
Temperature controlling mode Automatic digital temperature
Temperature controlling range Room temperature ~ 160 °C
Temperature controlling accuracy ± 0.2 °C
Power supply 220 V, 50 Hz
Vacuum Distillation Tester LDT-A13
Vacuum Distillation Tester LDT-A13
Ambient temperature 5 °C to 35 ℃
Relative humidity ≤ 85 %
Cubage of buffer vessel 1000 ml
Max. Residual pressure ≤ 2 mm Hg
Temperature controlling accuracy ± 1 ℃
Vapor Pressure Tester (REID METHOD)  LVPT-C10
Vapor Pressure Tester (REID METHOD) LVPT-C10
Operation temperature of water bath RT ~ 90 °C
Temperature controlling accuracy ± 0.1 °C
Dimensions 550 × 520 × 102 mm
Pressure meter accuracy ± 0.4 % kPa
Heating power of water bath 1600 W
Water Content Tester LWT-A10
Water Content Tester LWT-A10
Ambient Temperature Range ≤ 35°C
Relative Humidity ≤ 85%
Heating Mantle Cap Power 1000 W
Sample Determination 1 at a time
Dimension 580 × 350 × 300 mm
Water Content Tester LWT-A11
Water Content Tester LWT-A11
Ambient Temperature Range ≤ 35°C
Relative Humidity ≤ 85%
Heating Mantle Cap Power 1000 W × 2
Sample Determination 2 at a time
Dimension 690 × 570 × 310 mm
Water Soluble Acid and Alkali Tester LAAT-A10
Water Soluble Acid and Alkali Tester LAAT-A10
Graduated flask 100 ml,50 ml
Conical flask 100ml
Separatory funnel 250ml
Ambient temperature (-10 )°C to 35 °C
Relative humidity ≤ 85 %
Wax Oil Content Tester LWCT-A22
Wax Oil Content Tester LWCT-A22
Power supply AC 220 V ± 10 %, 50 Hz
Temperature controlling range in water bath RT ~ 90 ℃ ± 5 ℃
Cooling bath temperature (-35) ℃ ± 1 ℃
Evaporation temperature 35 ℃ ± 1 ℃
Flow rate 2 ~ 3 L / min
X-ray Fluorescence Sulfur in Oil Analyzer LST-A10
X-ray Fluorescence Sulfur in Oil Analyzer LST-A10
Sample quantity 2 to 3 ml (it is equal to sample depth of 3 mm to 4 mm)
Measurement time 60, 120, 240, 300, and 600 s at random
Measurement range 7 ppm to 5 %
Repeatability < 0.029 (S + 0.6)
Reproducibility < 0.063 (S + 0.6)