Electronic Wood Density Meter LWDM-A11 is robust and compact design device. It offers 0 .001 to 150 g weighing range and 10 seconds testing time. Designed with LCD display to observe density, volume, water absorption, porosity and Offers direct reading. It adopt non-absorbent wood products, density and volume of the products can be showed direct. It is used in Boiling method, vacuum saturation method and applied for testing the basic density, bulk , wet, apparent density, apparent porosity, water absorption, volume of open pores and closed pores, total porosity of wood For testing air-dried density of wood in laboratory and production environments.
| Weighing range | 0 .001 to 150 g |
|---|---|
| Minimum sample weight | 5 g |
| Maximum weighing capacity | 150 g |
| Water absorption and porosity | 0.0001 |
| Density resolution | 0.001g/cm<sup>3</sup> |
| Built-in weighing sensor | German HBM |
| A cage for floating objects | Yes |
| Function of solution compensation | Yes |
| Either water or liquid can be used as medium | Yes |
| Rechargeable batteries | NA |
| Wind-proof outer cover | Yes |
| Standard interface | RS-232 |
| Testing time | 10 seconds |
| Temperature range | 0 to 40℃ |
| Display | Digital Screen LCD Display |
| Dimension | 195 × 210 × 185 mm |
| Packing dimension | 395 × 195 × 330 mm |
| Power supply | AC 220 V, 50 Hz |
| Net weight | 3.5 kg |
| Gross weight | 4.5 kg |
Electronic Wood Density Meter used for testing the basic density, bulk ,wet, apparent density, apparent porosity, water absorption, volume of open pores and closed pores, total porosity of wood for testing air-dried density of wood, the bulk density also used across wax-sealing method for non-absorbent wood products.
Our density metres have a reading range of 0.001 to 99.999 g/cm3 and a high degree of measurement precision, allowing for immediate data reading. The electronic measurement of the frequency of oscillation is used in the oscillating U-tube densitometer method, which is a technique for determining the density of liquids and gases. The density value is determined from the frequency of oscillation, which is measured electronically. The vibration of a glass tube that contains the sample is measured by density metres while the instrument performs its function. Both the specific gravity and the refraction index are measurable properties. They are used for quality control and research and development purposes in a variety of sectors, including the oil industry, the chemical industry, the food and beverage industry, and others. When dealing with viscous liquids or problematic gases, density metres are extremely helpful because of their accuracy. Additionally known as a Hydrometer. From instruments with an accuracy of three digits to the world's most accurate density metre with six digits, we provide a range of density metres that satisfy the majority of needs in a variety of sectors and research and development.
| Density range | 0.001 to 99.999 g/cm3 |
| Density resolution | 0.001 g/cm3 |
| Measurement time | About 5 Seconds |
| Maximum weight | 300 g |
| Measure range | 0 to 100 % |
| Maximum weighing capacity | 100 g |
| Reading accuracy | 1 mg |
| Moisture readability | 0.0001 |
| Scale | Density [g/cm³] |
| Measurement range | 0.0001 to 99.9999 g/cm3 |
| Density resolution | 0.0001 g/cm |
| Maximum weight | 120 g |
| Measurement range | 0.0001 to 99.999 g/cm3 |
| Density resolution | 0.0001 g/cm3 |
| Maximum weight | 200 g |
| Minimum weight | 0.001 g |
| Measurement range | 0.0001 to 99.9999 g/cm3 |
| Density resolution | 0.0001 g/cm3 |
| Maximum weight | 120 g |
| Minimum weight | 0.0001 g |