Batch Transfer (peristaltic) Hose Pump LBHP-A10 is high flow rates fluids transfer unit, driven by the AC motor and the frequency converter control speed. Its maximum Flow rate is 1.5 to 9 L/min and offers 2.5 L oil consumption. Its operation is simple, reliable and pressure of transmission is high, suitable for massive viscosity and high lift materials. It is used to pump clean/sterile or aggressive fluids without exposing those fluids to contamination from exposed pump components.
| Flow rate max | 1.5 to 9 L/min |
|---|---|
| Max Lift | 120 meters |
| Max output pressure | 10Bar（1Mpa） |
| Oil consumption | 2.5 L |
| Liquid temperature | Up to 80°C |
| Hose material | CSM, F-NBR, NR, NBR, EPDM |
| Input/output | ½ inch Flange（ID 31.8mm） |
| Power | 0.75 kW |
Batch Transfer (peristaltic) Hose Pump is used to pump clean/sterile or aggressive fluids without exposing those fluids to contamination from exposed pump components also used in aggressive chemicals, agriculture, high solids slurries and other materials.
| Maximum flow rate | 2.8 to 16.8 L/min |
| Max Lift | 120 meters |
| Max output pressure | 10Bar（1Mpa） |
| Oil consumption | 5 L |
| Ambient Operation Temperature | 41 to 104°F |
| Maximum Inlet and Exhaust Pressure | 0.1 / 0.13 MPa |
| Leakage | 1×10<sup>-7</sup>mbar·l/s |
| Cooling Type | Air cooled |
| Ambient Operation Temperature | 41 to 104°F |
| Maximum Inlet and Exhaust Pressure | 0.1 / 0.13 MPa |
| Leakage | 1×10<sup>-7</sup> mbar·l/s |
| Cooling Type | Air cooled |
| Ambient Operation Temperature | 41 to 104°F |
| Maximum Inlet and Exhaust Pressure | 0.1 / 0.13 MPa |
| Leakage | 1×10<sup>-7</sup>mbar·l/s |
| Cooling Type | Air cooled |
It uses big starting torque design and is especially designed for low temperature working environment. It has a compact design and requires less storage place.
| Pumping Speed | 28.31 to 22.65 L / min |
| Ultimate Pressure | 5 Pa |
| Oil Capacity | 220 ml |
| Rotating Speed | 1720 / 1440 rpm |
It is especially designed for pumping air from sealed vessels. It provides smooth, pulse-free air flow, big starting torque design, produces minimal noise or vibrations and are capable of long, service-free life. It can also be used as fore-pump, diffusion pump or molecular pump.
| Pumping Speed | 120 L / Min |
| Ultimate Pressure | 6 × 10<sup>-2</sup> Pa |
| Oil Capacity | 1 L |
| Rotating Speed | 1400 rpm |
| Pumping Speed | 60 L / Min |
| Ultimate Pressure | 6 × 10<sup>-2</sup> Pa |
| Oil Capacity | 0.7 L |
| Rotating Speed | 1400 rpm |
| Pumping Speed | 240 L / Min |
| Ultimate Pressure | 6 × 10<sup>-2</sup> Pa |
| Oil Capacity | 1.2 L |
| Rotating Speed | 1400 rpm |
| Max. flow rate | 8 L/ min |
| Vacuum degree | -0.06 Mpa |
| Vacuum display mode | Digital display |
| Negative pressure adjustment range | 0 to -600 mbar |
It is designed to deliver uncontaminated air, gases or vapours. They can operate independently or as part of a modular system and require minimal maintenance. They are suitable for producing completely oil-free compressed air and vacuum production without environmental contamination through oil mist.
| Pumping Speed | 25 L/min |
| Motor Power | 180 W |
| Ultimate Vacuum | 0.095 MPa |
| Extreme Pressure | 50 mbar |
| Pumping Speed | 45 L/min |
| Motor Power | 300 W |
| Ultimate Vacuum | 0.095 MPa |
| Extreme Pressure | 50 mbar |
| Pumping Speed | 12 L/min |
| Ultimate Pressure | ≥ 0.075 MPa |
| Vacuum | 250 mbar |
| Material of diaphragm pump | Nitrile Rubber (NBR) |