CO<sub>2</sub> range |
0-20% |
CO<sub>2</sub> recover time |
(Return to 5% after opening the door for 30 seconds) ≤3 mins |
CO<sub>2</sub> control accuracy |
±0.1% |
CO<sub>2</sub> stability of 5%CO<sub>2</sub> |
±0.1% |
CO<sub>2</sub> uniformity |
±0.1% |
CO<sub>2</sub> sensor |
IR CO<sub>2</sub> sensor |
Shaking frequency |
40 to 300 rpm |
Drive way |
Three eccentric shaft balance drive type |
Humidity control |
50 to 90% RH |
37°C humidity control accuracy |
85% to 95% RH |
Humidity resolution |
0.001 |
Humidity deviation |
±2% |
Allowable shaking load |
15 kg |
Temperature control range |
4 to 65° C |
Temperature uniformity |
±0.5° C (test point at 37°C) |
Ambient temperature |
25°C |
Heating method |
6 side direct heating |
Sterilization method |
90˚ C moist heat sterilization |
Timing range |
0 to 5999 min |
Platform movement |
Orbital |
Platform size (L×B) |
450×450 mm (1pc) |
Shelf |
3 pcs |
Display |
Colorful touch screen controller |
Sterilization system |
90° high temp. high humidity sterilization system |
Filter |
Microbiological and HEPA filter |
Motor |
Low heat rejection brushless DC motor |
Interface |
RS485 |
Alarm system |
Temperature deviation, over temperature, high/low speed, door open, high/low CO<sub>2</sub> condensation, disinfection and sterilization reminder, auto cut-off of heat and fan, and auto-stop |
Orbital diameter |
20 mm+AO2 |
Interior dimension (W×D×H) |
605×700×520 mm |
Exterior dimension (W×D×H) |
793×975×853 mm |
Gross Weight |
98 kg (approx.) |
Power |
1800 W |
Voltage |
220V 50Hz |
Flask Configuration |
50 ml×36, 100 ml×23, 250 ml×13, 500 ml×8, 1 L×5, 2 L×3, 4 L×1, 5 L×1 |
- CO2 cooling and shaking incubator with air jacketed configurations
- Single orbital platform with triple eccentric shaft balance drive
- 6 sides direct heating with auto-adjustable cycle fan speed
- Door heating system at outer door and large toughened inner glass door for observation
- Continuous operation within 0 to 5999 min and 4 to 65°C of temperature range
- Fluorine-free design with 304 stainless steel chamber, shelves, and platform with round curved corners
- Low heat rejection brushless DC motor with high start torque
- CO2 control and monitoring system with IR sensors
- Pollution proof control with Micro-biological & HEPA filter
- 90° high temperature and sterilization system for thoroughly sterilization of chamber
- Large color touch screen controller with password lock function
- Unique air duct design with high quality compressor
- Load bearing structure provide excellent durability and performance
- Alarm system: Temperature deviation, over temperature, high/low speed, door open, high/low CO2 condensation, disinfection and sterilization reminder, auto cut-off of heat and fan, and auto-stop
- High- efficiency, with low power consumption
Air Jacketed CO2 Incubator are used for tissue engineering, cell culture, in vitro fertilization, diagnostics, neuroscience, cancer research and for developing biosensors across medical research, pharmaceutical industry, scientific research, laboratories, etc.