Ubbelohde Viscometer LUV-A10 has LCD display screen to show the running status of each measurement unit, precisely 6 units at the same time. It has 2 measuring positions & it can obtain intrinsic viscosity through one point method. There is no need to monitor the process after the start in this viscometer, the auto test runs continuously until the test gets completed. It accurately controls the temperature, time & flow rate of fluid tested. It meets FDA & GLP regulations on experiment data management.
| Measuring range | 0.3 - 50000 mm<sup>2</sup>/s |
|---|---|
| Measure position | 2 |
| Bath volume | 25 L |
| Timing accuracy | 0.01 s |
| Temperature range | 5 °C - 95 °C |
| Temperature fluctuation & uniformity | ± 0.01 °C |
| Temperature accuracy | Better than ± 0.01 °C |
| Water bath Inner dimension | 540 × 170 × 320 mm |
| Water bath Outer dimension | 610 × 270 × 500 mm |
| Heating power | 1 kW, 220 V |
| Material applicable | PET, PS, SAN, PBT, PMMA, PCT, PA, PIB, TPU, PAM, PSU, PEN, PC, PLA,CA, PVC, SB, Chitin, PAN, TP etc. |
Ubbelohde viscometer helps in obtaining kinetic viscosity, Dynamic viscosity, Relative viscosity, Viscosity ratio, DP, intrinsic viscosity & average molecular weight of chemical fluids, polymers and biological fluids.
| Measure position | 1 |
| Oil bath medium | Polydimethylsiloxane |
| Oil bath temperature range | 10 °C to 180 °C |
| Bath volume | 8 L |
| Measuring range | 0.3 - 50000 mm<sup>2</sup>/s |
| Measure position | 6 |
| Bath volume | 41 L |
| Timing accuracy | 0.01 s |
| Measuring range | 0.3 - 50000 mm<sup>2</sup>/s |
| Measure position | 4 |
| Bath volume | 33 L |
| Timing accuracy | 0.01 s |
| Measuring range | 0.35 to 5000 mm<sup>2</sup>/s |
| Measure position | 2 (4 units measuring position at option) |
| Bath volume | 12 L |
| Timing accuracy | 0.01 s |
| Measurement range | 100 mPa.s to 2000000 mPa.s |
| Rotors | Rotor no. 21, 27, 28, 29 ( total 4 pieces of spindles) |
| Rotor speed | 5, 10, 20, 50 r/min |
| Temperature control range | 45 to 200°C |
| Measurement range | 100 mPa.s to 200000 mPa.s |
| Rotors | Rotor no. 21, 27, 28, 29 ( total 4 pieces of spindles) |
| Rotor speed | 5, 10, 20, 50 r/min |
| Temperature control range | Room temperature to 200°C |
| Measurement range | 25 mPa.s to 1×10000000 mPa.s |
| Rotors | Rotor no. 21, 27, 28, 29 ( total 4 pieces of spindles) |
| Rotor speed | (0.1, 0.2, 0.5, 1, 2, 5, 10, 20, 50, 100, 200 ) r/min |
| Temperature control range | 45 to 200°C |
| Measuring range | 0.3 - 50000 mm<sup>2</sup>/s |
| Measure position | 4 |
| Bath volume | 33 L |
| Timing accuracy | 0.01 s |
| Measuring range | 0.3 - 50000 mm<sup>2</sup>/s |
| Measure position | 6 |
| Bath volume | 41 L |
| Timing accuracy | 0.01 s |
| Measuring range | 0.3 - 50000 mm<sup>2</sup>/s |
| Measure position | 2 |
| Bath volume | 25 L |
| Timing accuracy | 0.01 s |
| Accuracy | ± 2 % (F.S) | ||||||||||||||||||
| Temperature | -1℃ to 150℃ (± 0.1℃) | ||||||||||||||||||
| Spindle Details |
|
||||||||||||||||||
| Note | rotate speed (rpm); Viscosity Range: (mPa.s), 1 poise = 100 mPa.s |