Labtron LIBT-A23 is manufactured with instinctive display and high voltage range. It is designed and made as per ASTM D1816-04 “Test Methods for Breakdown Voltage of Lubricating Oil. We deliberately designed it to meet high accuracy.
| Light source | |
|---|---|
| Temperature of grinding milk white light bulb | |
| Light hole( Φ14) | |
| Color comparing tube | |
| Dimension | |
| Non-colorful flat bottom glass tube | |
| Observation lens | |
| Total power consumption | |
| Power supply | AC 220 V ± 5 % , 50Hz |
| Heating power of water bath | |
| Relative humidity | |
| Ambient temperature | |
| Temperature display mode of water bath | |
| Temperature controlling range in water bath | |
| Temperature controlling accuracy in water bath: | |
| Temperature controlling range in funnel | |
| Temperature display mode of funnel | |
| Temperature controlling accuracy in funnel | |
| Controlling case (L × W × H) | |
| Water bath (L × W × H) | |
| Cooling bath temperature | |
| Evaporation temperature | |
| Flow rate | |
| Timing range of timer | |
| Measurement range | 0 ~ 75 kV |
| Voltage rising rate | 3 kV ± 10 % / s |
| Distance between electrodes | 2.5 mm |
| Output power | 2 kVA |
It is widely used to determine dielectric constant of lubricating oils in the field of railway, aviation, power plant, petroleum industry, and scientific institutes.
| Power supply | AC 220 V ± 10 %, 50 Hz |
| Temperature controlling range in water bath | RT ~ 90 ℃ ± 5 ℃ |
| Cooling bath temperature | (-35) ℃ ± 1 ℃ |
| Evaporation temperature | 35 ℃ ± 1 ℃ |
| Dimension | 390 x 260 x 590 mm |
| Total power consumption | ≤ 1200 W |
| Power supply | AC 220 V ± 10 %, 50 Hz |
| Heating power of water bath | 1000 W |
| Light source | 220 V, 100 W |
| Temperature of grinding milk white light bulb | 2750 ± 50 K |
| Light hole( Φ14) | 26 pieces |
| Color comparing tube | Φ32 mm |
| Calorimeter type | Isoperibol |
| Temperature range | 5 to 40°C |
| Measurement range | 5 to 40 MJ/ kg |
| Operation Mode | A. Outer barrel temperature follows room temperature change mode Or B. Outer barrel temperature constant mode |
| Calorimeter type | Isoperibol |
| Temperature range | 5 to 40°C |
| Measurement range | 5 to 40 MJ/ kg |
| Operation Mode | The outer barrel temperature is constant |
| Calorimeter type | Isoperibol |
| Oxygen filling | Fully automatic oxygen filling & releasing, fully automatic bomb raising & lowering |
| Bomb volume | 250 ml |
| Analysis time | < 8 min full test process: <10 min |
| Capacity | 2.0 kVA |
| Speed of voltage increase | 2 k V/ s |
| Voltage inspection accuracy | 0.01 |
| Breakdown sensitivity | < 0.1 kV |
| Electric Muffle Furnace |
|
||||||||||||||||
| Temperature controller |
|
||||||||||||||||
| Electric heating plate |
|
| Power supply | AC 220 V ± 5 % , 50Hz |
| Measurement range | 0 ~ 75 kV |
| Voltage rising rate | 3 kV ± 10 % / s |
| Distance between electrodes | 2.5 mm |
| Dimension | 390 x 260 x 590 mm |
| Total power consumption | ≤ 1200 W |
| Power supply | AC 220 V ± 10 %, 50 Hz |
| Heating power of water bath | 1000 W |
| Power supply | AC 220 V ± 10 %, 50 Hz |
| Temperature controlling range in water bath | RT ~ 90 ℃ ± 5 ℃ |
| Cooling bath temperature | (-35) ℃ ± 1 ℃ |
| Evaporation temperature | 35 ℃ ± 1 ℃ |
| Ambient temperature | (-10)℃ ~ 35 ℃ |
| Relative humidity | ≤ 85 % |
| Sample cup Inner diameter | 31.0 ~ 32.0 mm |
| Sample cup Wall thickness | 1.0 ~ 1.5 mm |
| Refrigeration system | New-type refrigeration compressor |
| Controlling temperature of cold trough | Cold trough I: RT ~ (-51) °C, ± 1°; Cold trough II:RT ~ (-80) °C, ± 1 °C |
| Ambient temperature | ≤ 30 ℃ |
| Relative humidity | ≤ 85 % |
| Temperature controlling accuracy | ± 0.5 ℃ |
| Refrigeration system | New-type refrigeration compressor |
| Cold trough | Two holes in one trough, and same temperature |
| Ambient temperature | ≤ 30 ℃ |