Automatic Bomb Calorimeter LABC-B10 comes with automatic oxygen filling and releasing, fully automatic bomb raising and lowering system. Equipped with propeller to achieve high stirring efficiency, and faster oxygen bomb heat transfer to reduce test period. It is in accordance with international standards ASTM D5865, ISO 1928.
| Calorimeter type | Isoperibol |
|---|---|
| Oxygen filling | Fully automatic oxygen filling & releasing, fully automatic bomb raising & lowering |
| Bomb volume | 250 ml |
| Analysis time | < 8 min full test process: <10 min |
| Bomb washing | Manual |
| Bomb pressure (maximum) | 20 MPa |
| Bomb identity | Yes |
| No. of Tests | 6/hour |
| Temperature resolution | 0.0001 K |
| Precision (RSD) | ≤ 0.01 % |
| Heat Capacity Stability | ≤ 0.25 % within three months |
| Gas requirement | 99.5 % oxygen |
| Water requirements | Distilled water |
| Energy measurement range | 0 to 50000 J |
| Bucket filling | Automatic |
| Stirring method | Propeller |
| Reproducibility | 0.10 % (analysis of 1 g of benzoic acid) |
| Temperature Increase | 2°C (average) |
| Temperature measurement | PT1000 (temperature probe) |
| Working temperatures | ≤ 32°C |
| Cooling type | Refrigerating device |
| Network | Yes |
| Maximum Power | 0.6 kW |
| Power Inverter | No |
| Power supply | 220 V ±, 15 to 10 %, 50/60 Hz |
| Advance Calculations | Yes |
| Dimension | Main body: 440 × 550 × 460 mm Water Tank: 390 × 550 × 440 mm |
| Weight | 50 kg |
| Accessories no. | Name | Unit | Qty. |
| 1 | Ignition thread (500 pieces) Box | Box | 20 |
| 2 | Standard Benzoic Acid (1 gm * 10 pieces) | Bottle | 10 |
| 3 | Gasket Ring for Oxygen Filling Facility (big, middle, small) | Set | 15 |
| 4 | Heating Crucible | PC | 60 |
| 5 | Oxygen bomb gasket ring (big, middle, small) | Set | 15 |
| 6 | Plastic insulation cover | Set | 5 |
| 7 | Special Oxygen filling pipe | PC | 2 |
| 8 | Electrodes | Set | 1 |
Used in determination of calorific value of solid and liquid combustibles such as coal, coke, oil, petroleum material, biomass, cement and others.
| Calorimeter type | Isoperibol |
| Oxygen filling | Semi-automatic |
| Bomb volume | 282 ml |
| Analysis time | 15 to 25 min |
| Calorimeter type | Isoperibol |
| Temperature range | 5 to 40°C |
| Measurement range | 5 to 40 MJ/ kg |
| Operation Mode | A. Outer barrel temperature follows room temperature change mode Or B. Outer barrel temperature constant mode |
| Calorimeter type | Isoperibol |
| Temperature range | 5 to 40°C |
| Measurement range | 5 to 40 MJ/ kg |
| Operation Mode | The outer barrel temperature is constant |
| Ambient temperature | 10 °C ~ 40 °C |
| Relative humidity | ≤ 80 % |
| Measurement Range | Ambient Temperature ~ 250 °C |
| Flash Point | Lower than 104 °C , error is 2 °C; Higher than 104 °C , error is 6 °C |
| Ambient temperature | 10 °C ~ 40 ℃ |
| Relative humidity | ≤ 80 % |
| Ignition Mode | electron igniter / gas flame |
| Temperature range | Room Temperature ~ 300 ℃ |
| Ambient temperature | ≤ 35 °C |
| Relative humidity | ≤ 85 % |
| Temperature range | 5 °C ~ 110 °C, Each scale division is 0.5 °C; 20 °C ~ 150 °C, Each scale division is 1.0 °C; 90 °C ~ 370 °C, Each scale division is 2 °C |
| Aperture of ignition device | 0.8 mm |
| Temperature Range | Ambient to 100°C |
| Temperature Precision | ± 0.1°C |
| Air Flow | 94 mL ± 5 mL/min, with flowmeters |
| Timing Unit | 0 to 99 min 59 s, resolution 1 s |
| Ambient temperature | (-10) °C ~ 35 °C |
| Relative humidity | ≤ 85 % |
| Capillary viscometer | 11 pieces |
| Stirring motor | 6 W, 1200 rpm |
| Ambient temperature | (-10) °C ~ 35 °C |
| Relative humidity | ≤ 85 % |
| Capillary viscometer | 7 pieces of Cannon-Fenske reserve-flow capillary viscometer tubes in a group |
| Stirring motor | 6 W, 1200 rpm |
| Ambient temperature | (-10) °C ~ 35 °C |
| Relative humidity | ≤ 85 % |
| Capillary viscometer | 11 pieces |
| Stirring motor | 6 W, 1200 rpm |
| Thermometer | 6 ℃ ~ 400 ℃ |
| Scale Division | 2 °C |
| Spout Aperture | 0.6 ~ 0.8 mm |
| Ambient Temperature | -10 ℃ ~ 50 ℃ |
| Ambient Temperature | 10 ℃ ~ 40 ℃ |
| Relative Humidity | ≤ 85 % |
| Temperature Measurement- Full Scale | Ambient temperature to ~ 400 ℃ |
| Temperature Measurement- Repeatability | ≤ 4 ℃ |
| Thermometer | 0 ℃ ~ 360 °C |
| Scale Division | 1 °C |
| Ambient Temperature | ≤ 35 °C |
| Relative Humidity | ≤ 85 % |
| Graduated flask | 100 ml，50 ml |
| Conical flask | 100ml |
| Separatory funnel | 250ml |
| Ambient temperature | (-10 )°C to 35 °C |
| Ambient temperature | ≤ 35 °C |
| Relative humidity | ≤ 85 % |
| Precision of titration tube | Scale division is 0.02 ml |
| Total power consumption | ≤ 1200 W |
| Measurement range | ≥0.05 mg KOH/g |
| Potential measurement range | 0 to 1800.0 mV |
| Burette volume | 10 mL |
| Minimum titration volume | 0.001 ml |