Labtron LLTT-A12 is designed with cold filter plugging point test along with proper cooling bath. Equipped as per “Test Methods for Cold Filter Plugging Point of Distillate Fuels”.
| Measurement range | |
|---|---|
| Temperature controlling accuracy | |
| Refrigeration system | |
| Bath stirrer | |
| Sample stirrer | |
| Cold trough | |
| Controlling temperature of cold trough | |
| Constant temperature bath Cubage | |
| Constant temperature bath Types | |
| Temperature Range | |
| Temperature sensor | |
| Stirring motor Power | |
| Stirring motor Speed | |
| Ambient temperature | (-10)℃ ~ 35 ℃ |
| Relative humidity | ≤ 85 % |
| Refrigeration speed | |
| Repeatability for solidifying point | |
| Repeatability for pour point | |
| Reproducibility | |
| Pressure of cooling water | |
| The lowest temperature | |
| Sample cup Inner diameter | 31.0 ~ 32.0 mm |
| Sample cup Wall thickness | 1.0 ~ 1.5 mm |
| Sample cup Height | 115 ~ 125 mm |
| Pumping pressure | U type differential pressure meter 1961 Pa (200 mm H<sub>2</sub>O) |
| Dimensions | |
| Inner Dimensions | |
| Outer Dimensions | |
| Total power consumption | ≤ 150 W |
| Heating power | |
| Power supply | AC 220 V ± 10 %, 50 Hz |
It can be widely used in petroleum, chemical industries and environmental studies.
| Refrigeration system | New-type refrigeration compressor |
| Cold trough | One trough with two baths, temperatures in two baths are equal |
| Controlling temperature of cold trough | Room temperature ~ (-70) °C |
| Ambient temperature | ≤ 30 ℃ |
| Temperature controlling accuracy | ± 0.5 ℃ |
| Refrigeration system | New-type refrigeration compressor |
| Cold trough | Two holes in one trough, and same temperature |
| Ambient temperature | ≤ 30 ℃ |
| Freezing point range | -54°C to 2°C |
| Cold bath measurement temperature range | -70° to 20°C |
| Temperature controlling accuracy | ±0.5°C |
| Bath liquids stirring | Electric |
| Temperature controlling accuracy | ± 0.5 °C |
| Refrigeration system | New-type refrigeration compressor |
| Cold trough | One trough with two baths, temperatures in two baths are equal |
| Controlling temperature of cold trough | Room temperature ~ (-70) °C |
| Refrigeration system | New-type refrigeration compressor |
| Controlling temperature of cold trough | Cold trough I: RT ~ (-51) °C, ± 1°; Cold trough II:RT ~ (-80) °C, ± 1 °C |
| Ambient temperature | ≤ 30 ℃ |
| Relative humidity | ≤ 85 % |
| Capacity | 20 L |
| Temperature range | Ambient +5°C to 100°C |
| Precision | ± 0.1℃ |
| Stirring range | 1200 r/min |
| Refrigeration system | New-type refrigeration compressor |
| Controlling temperature of cold trough | Cold trough I: 0 °C, ± 0.5 °C; Cold trough II: 0 °C, (-17) °C, ± 0.5 °C; Cold trough III: (-17) °C, (-34) °C, ± 0.5 °C; Cold trough IV: (-70) °C, ± 0.5 °C |
| Ambient temperature | ≤ 30 ℃ |
| Relative humidity | ≤ 85 % |
| Chamber quantity | 2 chambers |
| Chamber 01 temperature control | Ambient to -51 ℃ |
| Chamber 02 temperature control | Ambient to -65 ℃ |
| Temperature precision | ±1°C |
| Temperature controlling accuracy | ± 0.5 °C |
| Refrigeration system | New-type refrigeration compressor |
| Cold trough | One trough with two baths, temperatures in two baths are equal |
| Controlling temperature of cold trough | Room temperature ~ (-70) °C |
| Ambient temperature | ≤ 30 ℃ |
| Refrigeration speed | > 40 °C / 10 min |
| Repeatability for solidifying point | ≤ 2 °C |
| Repeatability for pour point | ≤ 3 °C |
| Ambient temperature | Room temperature to 35 °C |
| Relative humidity | ≤ 85 % |
| Temperature controlling range | Room temperature to 99.9 °C |
| Temperature controlling accuracy | ± 1 °C |
| Ambient temperature | Room temperature to 35 °C |
| Relative humidity | ≤ 85 % |
| Timing range | 1 s to 9 min 59 s |
| Temperature controlling range | Room temperature to 99.9 °C |
| Temperature controlling accuracy | ≤ 0.5 ℃ |
| Temperature controlling range | Room temperature ~ 200 ℃ |
| Power supply for illumination | 5 V |
| Power of motor | 2 kW |
| Measurement range | Room temperature ~ 150°C |
| Stirring speed | 0 ~ 1200 r / min |
| Heating power | 25 W |
| Interior Dimension | 360 × 250 × 545 mm |
| Ambient temperature | 10 °C ~ 40 ℃ |
| Relative humidity | ≤ 80 % |
| Ignition Mode | electron igniter / gas flame |
| Temperature range | Room Temperature ~ 300 ℃ |
| Ambient temperature | ≤ 35 °C |
| Relative humidity | ≤ 85 % |
| Temperature range | 5 °C ~ 110 °C, Each scale division is 0.5 °C; 20 °C ~ 150 °C, Each scale division is 1.0 °C; 90 °C ~ 370 °C, Each scale division is 2 °C |
| Aperture of ignition device | 0.8 mm |
| Ambient temperature | 10 °C ~ 40 °C |
| Relative humidity | ≤ 80 % |
| Measurement Range | Ambient Temperature ~ 250 °C |
| Flash Point | Lower than 104 °C , error is 2 °C; Higher than 104 °C , error is 6 °C |
| Evaporation bath type and size | Aluminum block bath, φ260 × 130 mm |
| Holes for testing | 3 pieces |
| Size of holes for testing cylinder | φ51 × 70 mm |
| Flow rate display | Flow meter |
| Evaporation bath type and size | Aluminum bath φ260 × 130 mm |
| Holes for testing | 5 pieces |
| Size of holes for testing cylinder | φ51 × 70 mm |
| Working temperature | 160 ℃ ~ 165℃ |
| Bath type | Oil bath |
| Bath capacity | 5000 ml ± 50 ml |
| Ambient temperature | Room temperature to 35 °C |
| Relative humidity | ≤ 85 % |
| Electric Muffle Furnace |
|
||||||||||||||||
| Temperature controller |
|
||||||||||||||||
| Electric heating plate |
|