Handheld ozone tester LHOT-A10 is a microprocessor based unit suitable for ozone concentration detection in various industrial and special environments. It employs an electrochemical sensor and a built-in suction pump. It is integrated with a temperature and humidity detection function. Easy controls and customizable parameter settings offer functional flexibility to the end user.
| Measurement range | 0 ppm ∼ 5 ppm |
|---|---|
| Resolution | 0.001 ppm ( 0 ppm ∼ 5 ppm ) |
| Temperature range | ˗ 40 °C ∼ 120 °C |
| Humidity range | 0 % ∼ 100 % RH |
| Detection accuracy | ≤ ± 3 % |
| Response time | ≤ 60 s (T80) |
| Release time | ≤ 60 s |
| Linearity error | ≤ ± 1 % |
| Zero drift | ≤ ± 1 % ( F.S/Year ) |
| Operating temperature | ˗ 30 °C ∼ 60 °C |
| Operating humidity | ≤ 95 % , non-condensing |
| Working pressure | ˗ 30 kPa ∼ 200 kPa |
| Display resolution | 320 x 240 |
| Power supply | 4000 mA Lithium-ion battery |
| Dimensions | 165 x 80 x 30 mm |
| Net weight | 0.5 kgs |
Used in chemical industry, health and safety monitoring, ozone process control, personal exposure monitoring, source and leak detection; used to measure ozone concentrations in operation limited places pipelines, tunnels, etc.
| Ozone measurement range | 0 ppm ∼ 5 ppm, 0 ppm ∼ 100 ppm, 0 ppm ∼ 300 ppm, 0 ppm ∼ 600 ppm ( Optional ) |
| Flow rate | 1.5 L/min |
| Accuracy | 0.01 ppm or 3 % of reading |
| Resolution | 0.001 ppm |
| Temperature Measurement Range | -10℃ to 60℃ |
| Temperature Resolution | 0.1°C |
| Temperature Accuracy | ± 1.5℃ |
| Relative Humidity Range | 20% to 80% RH |
| Capacity | 50 kg |
| Accuracy | 1 g |
| Speed | 1 s |
| Value stable time | 2 s |
| Measuring range | ± 500 Pa |
| Repeatability | ± 0.2 % FS |
| Resolution | 0.1 Pa |
| Sampling rate | 0.5 s |
| Measuring range | 0 ∼ 125 Pa |
| Accuracy | 0 ± 0.2 Pa (liner error)<hr> ± 1 % |
| Operating temperature range | 0 °C ∼ 50 °C |
| Operational humidity | ˂ 85 RH |
| Ozone measurement range | 0 ppm ∼ 100 ppm/ 0 ppm ∼ 1000 ppm |
| Flow rate | 1 L/min |
| Accuracy | 0.01 ppm |
| Measuring time | 10 seconds |
| Sampling Method | Diffusion | ||||||
| Working conditions |
|
||||||
| Explosion proof grade | Exia II CT3 | ||||||
| Protection grade | IP65 |
| Sampling | With internal sampling pump, flow rate is up to 1 L/min, ten grades of pumping suction for selection |
| Gas | Ethylene C2H4 |
| Measure Range | 0 to 1000 ppm |
| Resolution | 1ppm |
| Sampling method | Diffusion |
| Sensor type | CO2: solid electrolyte sensor, O2：electrochemical sensor |
| Detection range | CO2：0.04 to 5.00 % and O2：0.0 to 30.0 % |
| Detection accuracy | CO2：± 30 % rdg (rdg = reading) and O2：± 3 % F.S. (F.S. = full scale) |