Radio Frequency Identification Water Purification System LRFW-A13 is a 80 L capacited revolutionary, modular design which helps in elimination of large amount of salts and other minerals from tap water, using RO with the least TOC level i.e. < 3 ppb. This system produce and reject water at the same time. The unique feature of this model is that it’s equipped with a RFID Radio Frequency Identification Chip which helps keeping a check on the quality of water in real time. It’s designed to deliver compliant purified water with clear quality parameters and care free maintenance
| Output of Pure water | ≥ 40 L / hr. |
|---|---|
| Process | Single Pass RO system |
| Configuration | Floor Standing |
| Water Tank capacity | 80 L |
| Output of Ultrapure water | ≥ 1- 1.5 L / min |
| Resistivity at 25 °C | 18.25 M Ω. cm |
| Conductivity at 25 °C | ≤ 10 µs / cm |
| TOC | < 3 ppb |
| Pyrogens / Endotoxins | < 0.025 EU / ml |
| Bacteria | < 1 cfu / ml |
| Particles ( > 0.22 µm ) | < 1 / ml |
| Absorbance ( 254 nm ) | ≤ 0.001 |
| Reactive Silica ( SiO2 ) | < 0.01 ppm |
| Heavy metal | < 0.01 ppm |
| Electrical requirements | 220 V / 50 Hz |
| Power | ≥ 200 W |
| Dimensions ( L x W x H ) | 340 x 550 x 530 mm |
| Weight | 34 kg |
Used in PCR / DNA preparation, HPLC, LC-MS, electrophoresis, chemical analysis experiment, protein analysis
Radio Frequency Identification Water Purifier are equipped with a RFID Radio Frequency Identification Chip which helps keeping a check on the quality of water in real time. This helps in monitoring of parameters for the purifier
| Output of Pure water | ≥ 30 L / hr. |
| Process | Double Pass RO system |
| Configuration | Benchtop |
| Water Tank capacity | 30 L |
| Output of Pure water | ≥ 50 L / hr. |
| Process | Double Pass RO system |
| Configuration | Floor Standing |
| Water Tank capacity | 80 L |
| Feed Water | Tap Water , TDS ≤ 400 ppm, Water Temperature: 5 to 40°C |
| Water Production Rate | ≥ 10 L/ h, Ultrapure Water Flow Rate 2 L/ min |
| Water Quality (Two Stage) | Ultrapure water: Resistivity: 18.25 MΩ.cm at 25°C conforms to ASTM CAP NCCLS |
| Free Chlorine | < 3 ppm |
| Output of Pure water | ≥ 50 L / hr. |
| Process | Single Pass RO system |
| Configuration | Floor Standing |
| Water Tank capacity | 80 L |
| Output of Pure water | ≥ 20 L / hr. |
| Process | Single Pass RO system |
| Configuration | Benchtop |
| Water Tank capacity | 30 L |
| Output of Pure water | ≥ 20 L / hr. |
| Process | Double Pass RO system |
| Configuration | Benchtop |
| Water Tank capacity | 30 L |
| Output of Pure water | ≥ 30 L / hr. |
| Process | Single Pass RO system |
| Configuration | Benchtop |
| Water Tank capacity | 30 L |
| Output of Pure water | ≥ 40 L / hr. |
| Process | Double Pass RO system |
| Configuration | Floor standing |
| Water Tank capacity | 80 L |
| Output of Pure water | ≥ 10 L / hr. |
| Process | Double Pass RO system |
| Configuration | Benchtop |
| Water Tank capacity | 30 L |
| Output of Pure water | ≥ 10 L / hr. |
| Process | Single Pass RO system |
| Configuration | Benchtop |
| Water Tank capacity | 30 L |
| Output | 30 liters/hour |
| Flow rate | Up to 2 liters/minute (with pressure tank) |
| Pure water outlet | 2 reverse osmosis water, deionized water |
| Deionized Water Quality | Resistivity: 16 to 18.2 M Ω cm<br/> Bacteria: N/A<br/> Particle (>0.1 µm): N/A |
| Output | 30 liters/hour |
| Flow rate | Up to 2 liters/minute (with pressure tank) |
| Pure water outlet | 2 reverse osmosis water, deionized water |
| Deionized Water Quality | Resistivity: 16 to 18.2 M Ω cm<br/> Bacteria: N/A<br/> Particle (>0.1 µm): N/A |
| Output 2nd stage RO water | 90 liters/hour |
| Output ultrapure water | Up to 2 liters/minute (when tank is full) |
| Ultrapure Water Quality | Resistivity (25°C) 18.2 M Ω cm<br/> TOC: < 3ppb<br/> Bacteria: <0.1 cfu/ml<br/> Particle (>0.2 µm): <1/ml<br/> Endotoxin: <0.001EU/ml<br/> RNases: <1pg/ml<br/> DNases: <5pg/ml |
| RO Water Quality | Conductivity 1st stage RO water: Feed water Conductivity ×5 %<br/> Conductivity 2nd stage RO water: 1 to 5 µs/cm |
| Water quality | Two stage(Type III and type I) |
| Feed water | Tap waterTDS≤400ppm<hr> Water temperature: 5-40℃<hr> Type 3 water ≥10L/h |
| Conectivity | <5 μs/cm@25℃ |
| Resistivity | 18.25 MΩ.cm @ 25 ℃ |
| Water quality | One stage (Type I) |
| Feed water | RO water /Distilled water<hr> Water temperature: 5 ~ 40℃ |
| Resistivity | 18.25 MΩ.cm @ 25 ℃ |
| TOC | < 5ppb |
This water purification system is a combinational system that produces Type III water after RO and Type I water after deionization in one cycle
| Output of Pure water | ≥ 20 L / hr. |
| Water Type | Type I and Type III |
| Water Tank capacity | 30 L |
| Configuration | Benchtop |
| Output of Pure water | ≥ 30 L / hr. |
| Water Type | Type I and Type III |
| Water Tank capacity | 30 L |
| Configuration | Benchtop |
| Output of Pure water | ≥ 10 L / hr. |
| Water Type | Type I and Type III |
| Water Tank capacity | 30 L |
| Configuration | Benchtop |
It provides Type III level water which is required for chemical and physical inspection or for washing lab glassware’s
| Output of Pure water | ≥ 10 L / hr. |
| Water Type | Type III |
| Configuration | Benchtop |
| Process | Double Pass RO system |
| Output of Pure water | ≥ 20 L / hr. |
| Water Type | Type III |
| Configuration | Benchtop |
| Process | Double Pass RO system |
| Output of Pure water | ≥ 30 L / hr. |
| Water Type | Type III |
| Configuration | Benchtop |
| Process | Double Pass RO system |
This water purification system provides Type II level water with consistency and reliability. It removes approximately 98% of inorganic ions and 99 % of all dissolved organic substances
| Output of Pure water | ≥ 30 L / hr. |
| Process | Double Pass RO system |
| Water Type | Type II |
| Water Tank capacity | 30 L |
| Output of Pure water | ≥ 20 L / hr. |
| Process | Double Pass RO system |
| Water Type | Type II |
| Water Tank capacity | 30 L |
| Output of Pure water | ≥ 10 L / hr. |
| Process | Double Pass RO system |
| Water Type | Type II |
| Water Tank capacity | 30 L |