Type I and Type III RO Water Purification System LOTW-B20 is a unit which delivers primary grade water as well as ultra-pure water and has 30 L/hr standard flow rate. Meets the standards of ASTM, CAP and NCCLS. Features like built-in RO membrane antiscalant, ultra purification cartridge, online-monitoring of water resistance, manual water cycling program etc. ensures consistent quality of water. The unit composes of pre-treatment system, RO membrane, Water pump and ultra-purification system. It is majorly required in analytical labs.
| Water production rate | ≥ 30 L/h |
| Water intake rate | 1.5 to 1.8 L/min |
| Temperature | 5 to 40°C |
| Humidity | 10% to 80% |
| Feed water | Tap water: 0.15 to 0.4 MPa<br/> TDS ≤ 400 ppm<br/> Water temperature: 5 to 40°C |
| Water quality | Resistivity: 18.25 MΩ.cm at 25°C<br/> Conductivity: 0.055 μS/cm at 25°C<br/> Meets ASTM, CAP, NCCLS specifications |
| Retention rate of silicon | > 99.9 % |
| TOC | < 20 ppb |
| Particle (> 0.22 μm) | < 2 /ml |
| Absorbance (254 nm, 1cm optical distance) | < 0.001 |
| Reactive Silica (SiO<sub>2</sub>) | < 0.01 ppm |
| Heavy metal | < 0.01 ppm |
| Power supply | 220 V/50 Hz 450 W |
| Dimension (L×W×H) | 490×550×850 mm |
This water purification system is a combinational system that produces Type III water after RO and Type I water after deionization in one cycle
| Output of Pure water | ≥ 50 L / hr. |
| Water Type | Type I and Type III |
| Water Tank capacity | 80 L |
| Output of Pure water | ≥ 40 L / hr. |
| Water Type | Type I and Type III |
| Water Tank capacity | 80 L |
| Output of Pure water | ≥ 40 L / hr. |
| Water Type | Type I and Type III |
| Water Tank capacity | 80 L |
| Output of Pure water | ≥ 20 L / hr. |
| Water Type | Type I and Type III |
| Water Tank capacity | 30 L |
| Output of Pure water | ≥ 30 L / hr. |
| Water Type | Type I and Type III |
| Water Tank capacity | 30 L |
| Output of Pure water | ≥ 50 L / hr. |
| Water Type | Type I and Type III |
| Water Tank capacity | 80 L |
| Output of Pure water | ≥ 30 L / hr. |
| Water Type | Type I and Type III |
| Water Tank capacity | 30 L |
| Output of Pure water | ≥ 10 L / hr. |
| Water Type | Type I and Type III |
| Water Tank capacity | 30 L |
| Output of Pure water | ≥ 20 L / hr. |
| Water Type | Type I and Type III |
| Water Tank capacity | 30 L |
| Output of Pure water | ≥ 10 L / hr. |
| Water Type | Type I and Type III |
| Water Tank capacity | 30 L |
This water purification system provides Type II level water with consistency and reliability. It removes approximately 98% of inorganic ions and 99 % of all dissolved organic substances
| Output of Pure water | ≥ 30 L / hr. |
| Process | Double Pass RO system |
| Water Type | Type II |
| Output of Pure water | ≥ 30 L / hr. |
| Process | Single Pass RO system |
| Water Type | Type II |
| Output of Pure water | ≥ 50 L / hr. |
| Process | Double Pass RO system |
| Water Type | Type II |
| Output of Pure water | ≥ 40 L / hr. |
| Process | Single Pass RO system |
| Water Type | Type II |
| Output of Pure water | ≥ 40 L / hr. |
| Process | Double Pass RO system |
| Water Type | Type II |
| Output of Pure water | ≥ 20 L / hr. |
| Process | Single Pass RO system |
| Water Type | Type II |
| Output of Pure water | ≥ 10 L / hr. |
| Process | Single Pass RO system |
| Water Type | Type II |
| Output of Pure water | ≥ 50 L / hr. |
| Process | Single Pass RO system |
| Water Type | Type II |
| Output of Pure water | ≥ 10 L / hr. |
| Process | Double Pass RO system |
| Water Type | Type II |
| Output of Pure water | ≥ 20 L / hr. |
| Process | Double Pass RO system |
| Water Type | Type II |
It provides Type III level water which is required for chemical and physical inspection or for washing lab glassware’s
| Output of Pure water | ≥ 10 L / hr. |
| Water Type | Type III |
| Configuration | Benchtop |
| Output of Pure water | ≥ 20 L / hr. |
| Water Type | Type III |
| Configuration | Benchtop |
| Output of Pure water | ≥ 50 L / hr. |
| Water Type | Type III |
| Configuration | Floor Standing |
| Output of Pure water | ≥ 30 L / hr. |
| Water Type | Type III |
| Configuration | Benchtop |
| Output of Pure water | ≥ 40 L / hr. |
| Water Type | Type III |
| Configuration | Floor Standing |
| Output of pure water | ≥20 L/h |
| Water type | III type |
| Configuration | Desktop |
| Output of Pure water | ≥ 20 L / hr. |
| Water Type | Type III |
| Configuration | Benchtop |
| Output of Pure water | ≥ 50 L / hr. |
| Water Type | Type III |
| Configuration | Floor Standing |
| Output of Pure water | ≥ 40 L / hr. |
| Water Type | Type III |
| Configuration | Floor Standing |
| Output of Pure water | ≥ 10 L / hr. |
| Water Type | Type III |
| Configuration | Benchtop |
| Output of Pure water | ≥ 30 L / hr. |
| Water Type | Type III |
| Configuration | Benchtop |
Radio Frequency Identification Water Purifier are equipped with a RFID Radio Frequency Identification Chip which helps keeping a check on the quality of water in real time. This helps in monitoring of parameters for the purifier
| Output of Pure water | ≥ 50 L / hr. |
| Process | Single Pass RO system |
| Configuration | Floor Standing |
| Output of Pure water | ≥ 20 L / hr. |
| Process | Single Pass RO system |
| Configuration | Benchtop |
| Output of Pure water | ≥ 40 L / hr. |
| Process | Single Pass RO system |
| Configuration | Floor Standing |
| Output of Pure water | ≥ 10 L / hr. |
| Process | Double Pass RO system |
| Configuration | Benchtop |
| Output of Pure water | ≥ 30 L / hr. |
| Process | Single Pass RO system |
| Configuration | Benchtop |
| Output of Pure water | ≥ 30 L / hr. |
| Process | Double Pass RO system |
| Configuration | Benchtop |
| Output of Pure water | ≥ 20 L / hr. |
| Process | Double Pass RO system |
| Configuration | Benchtop |
| Output of Pure water | ≥ 10 L / hr. |
| Process | Single Pass RO system |
| Configuration | Benchtop |
| Output of Pure water | ≥ 50 L / hr. |
| Process | Double Pass RO system |
| Configuration | Floor Standing |
| Feed Water | Tap Water , TDS ≤ 400 ppm, Water Temperature: 5 to 40°C |
| Water Production Rate | ≥ 10 L/ h, Ultrapure Water Flow Rate 2 L/ min |
| Water Quality (Two Stage) | Ultrapure water: Resistivity: 18.25 MΩ.cm at 25°C conforms to ASTM CAP NCCLS |
| Output of Pure water | ≥ 40 L / hr. |
| Process | Double Pass RO system |
| Configuration | Floor standing |
UV water purification systems destroy the DNA of micro-organisms making the water contamination free. Water produced from UV water purification is contamination free water which is potable for consumption
| Output of Pure water | ≥ 10 L / hr. |
| Process | Double Pass RO system |
| Configuration | Benchtop |
| Output of Pure water | ≥ 50 L / hr. |
| Process | Single Pass RO system |
| Configuration | Floor Standing |
| Output of Pure water | ≥ 30 L / hr. |
| Process | Single Pass RO system |
| Configuration | Benchtop |
| Output of Pure water | ≥ 20 L / hr. |
| Process | Single Pass RO system |
| Configuration | Benchtop |
| Output of Pure water | ≥ 50 L / hr. |
| Process | Double Pass RO system |
| Configuration | Floor Standing |
| Output of Pure water | ≥ 20 L / hr. |
| Process | Double Pass RO system |
| Configuration | Benchtop |
| Output of Pure water | ≥ 40 L / hr. |
| Process | Single Pass RO system |
| Configuration | Floor Standing |
| Output of Pure water | ≥ 40 L / hr. |
| Process | Double Pass RO system |
| Configuration | Floor standing |
| Output of Pure water | ≥ 30 L / hr. |
| Process | Double Pass RO system |
| Configuration | Benchtop |
| Output of Pure water | ≥ 10 L / hr. |
| Process | Single Pass RO system |
| Configuration | Benchtop |
| Water quality | Two stage(Type III and type I) |
| Feed water | Tap waterTDS≤400ppm<hr> Water temperature: 5-40℃<hr> Type 3 water ≥10L/h |
| Conectivity | <5 μs/cm@25℃ |
| Output 2nd stage RO water | 90 liters/hour |
| Output ultrapure water | Up to 2 liters/minute (when tank is full) |
| Ultrapure Water Quality | Resistivity (25°C) 18.2 M Ω cm<br/> TOC: < 3ppb<br/> Bacteria: <0.1 cfu/ml<br/> Particle (>0.2 µm): <1/ml<br/> Endotoxin: <0.001EU/ml<br/> RNases: <1pg/ml<br/> DNases: <5pg/ml |
| Output 2nd stage RO water | 90 liters/hour |
| Output ultrapure water | Up to 2 liters/minute (when tank is full) |
| Ultrapure Water Quality | Resistivity (25°C) 18.2 M Ω cm<br/> TOC: < 3ppb<br/> Bacteria: <0.1 cfu/ml<br/> Particle (>0.2 µm): <1/ml<br/> Endotoxin: <0.001EU/ml<br/> RNases: <1pg/ml<br/> DNases: <5pg/ml |
| Water quality | One stage (Type I) |
| Feed water | RO water /Distilled water<hr> Water temperature: 5 ~ 40℃ |
| Output | 30 liters/hour |
| Flow rate | Up to 2 liters/minute (with pressure tank) |
| Pure water outlet | 2 reverse osmosis water, deionized water |
| Output | 30 liters/hour |
| Flow rate | Up to 2 liters/minute (with pressure tank) |
| Pure water outlet | 2 reverse osmosis water, deionized water |
