Radio Frequency Identification Water Purification System LRFW-A14

Radio Frequency Identification Water Purification System LRFW-A14 is a 80 L capacited revolutionary, modular design which helps in elimination of large amount of salts and other minerals from tap water, using RO with the least TOC level i.e. < 3 ppb. This system produce and reject water at the same time. The unique feature of this model is that it’s equipped with a RFID Radio Frequency Identification Chip which helps keeping a check on the quality of water in real time. It’s designed to deliver compliant purified water with clear quality parameters and care free maintenance

Output of Pure water &ge; 50 L / hr.
Process Single Pass RO system
Configuration Floor Standing
Water Tank capacity 80 L
Output of Ultrapure water &ge; 1- 1.5 L / min
Resistivity at 25 °C 18.25 M &Omega;. cm
Conductivity at 25 °C &le; 10 µs / cm
TOC < 3 ppb
Pyrogens / Endotoxins < 0.025 EU / ml
Bacteria < 1 cfu / ml
Particles ( > 0.22 µm ) < 1 / ml
Absorbance ( 254 nm ) &le; 0.001
Reactive Silica ( SiO2 ) < 0.01 ppm
Heavy metal < 0.01 ppm
Electrical requirements 220 V / 50 Hz
Power &ge; 350 W
Dimensions ( L x W x H ) 340 x 550 x 530 mm
Weight 34 kg
  • Radio Frequency Identification Chip integrated
  • Advanced Single Pass reverse osmosis system for excellent water quality
  • Equipped with 80 L water holding tank
  • Least TOC level < 3 ppb
  • Source of inlet water – Tap water
  • Floor Standing model
  • LCD display to display the intake of water pressure and various parameters intuitively
  • Programmed water shortage protection alarm
  • Anti-fouling RO membrane prevention programme
  • Online monitoring of water resistance
  • Ease of cleansing , disinfecting and draining waste water
  • Micro filter membrane to filter out pollutants
  • Automatic RO membrane antiscale flushing to extend the life of the RO membrane

Used in PCR / DNA preparation, HPLC, LC-MS, electrophoresis, chemical analysis experiment, protein analysis

Related Products of Radio Frequency Identification Water Purification System

Radio Frequency Identification Water Purifier are equipped with a RFID Radio Frequency Identification Chip which helps keeping a check on the quality of water in real time. This helps in monitoring of parameters for the purifier

Output of Pure water &ge; 20 L / hr.
Process Double Pass RO system
Configuration Benchtop
Water Tank capacity 30 L
Output of Pure water &ge; 10 L / hr.
Process Double Pass RO system
Configuration Benchtop
Water Tank capacity 30 L
Output of Pure water &ge; 30 L / hr.
Process Double Pass RO system
Configuration Benchtop
Water Tank capacity 30 L
Output of Pure water &ge; 10 L / hr.
Process Single Pass RO system
Configuration Benchtop
Water Tank capacity 30 L
Output of Pure water &ge; 40 L / hr.
Process Double Pass RO system
Configuration Floor standing
Water Tank capacity 80 L
Output of Pure water &ge; 40 L / hr.
Process Single Pass RO system
Configuration Floor Standing
Water Tank capacity 80 L
Feed Water Tap Water , TDS ≤ 400 ppm, Water Temperature: 5 to 40°C
Water Production Rate ≥ 10 L/ h, Ultrapure Water Flow Rate 2 L/ min
Water Quality (Two Stage) Ultrapure water: Resistivity: 18.25 MΩ.cm at 25°C conforms to ASTM CAP NCCLS
Free Chlorine < 3 ppm
Output of Pure water &ge; 50 L / hr.
Process Double Pass RO system
Configuration Floor Standing
Water Tank capacity 80 L
Output of Pure water &ge; 20 L / hr.
Process Single Pass RO system
Configuration Benchtop
Water Tank capacity 30 L
Output of Pure water &ge; 30 L / hr.
Process Single Pass RO system
Configuration Benchtop
Water Tank capacity 30 L
Water quality One stage (Type I)
Feed water RO water /Distilled water<hr> Water temperature: 5 ~ 40℃
Resistivity 18.25 MΩ.cm @ 25 ℃
TOC < 5ppb
Water quality Two stage(Type III and type I)
Feed water Tap waterTDS≤400ppm<hr> Water temperature: 5-40℃<hr> Type 3 water ≥10L/h
Conectivity <5 μs/cm@25℃
Resistivity 18.25 MΩ.cm @ 25 ℃
Output 2nd stage RO water 90 liters/hour
Output ultrapure water Up to 2 liters/minute (when tank is full)
Ultrapure Water Quality Resistivity (25°C) 18.2 M Ω cm<br/> TOC: < 3ppb<br/> Bacteria: <0.1 cfu/ml<br/> Particle (>0.2 µm): <1/ml<br/> Endotoxin: <0.001EU/ml<br/> RNases: <1pg/ml<br/> DNases: <5pg/ml
RO Water Quality Conductivity 1st stage RO water: Feed water Conductivity ×5 %<br/> Conductivity 2nd stage RO water: 1 to 5 µs/cm

Type II Water Purification System

This water purification system provides Type II level water with consistency and reliability. It removes approximately 98% of inorganic ions and 99 % of all dissolved organic substances

Output of Pure water &ge; 10 L / hr.
Process Double Pass RO system
Water Type Type II
Water Tank capacity 30 L
Output of Pure water &ge; 30 L / hr.
Process Double Pass RO system
Water Type Type II
Water Tank capacity 30 L
Output of Pure water &ge; 20 L / hr.
Process Double Pass RO system
Water Type Type II
Water Tank capacity 30 L

Type III Water Purification System

It provides Type III level water which is required for chemical and physical inspection or for washing lab glassware’s

Output of Pure water &ge; 20 L / hr.
Water Type Type III
Configuration Benchtop
Process Double Pass RO system
Output of Pure water &ge; 30 L / hr.
Water Type Type III
Configuration Benchtop
Process Double Pass RO system
Output of Pure water &ge; 10 L / hr.
Water Type Type III
Configuration Benchtop
Process Double Pass RO system

UV Water Purification System

UV water purification systems destroy the DNA of micro-organisms making the water contamination free. Water produced from UV water purification is contamination free water which is potable for consumption

Output of Pure water &ge; 30 L / hr.
Process Double Pass RO system
Configuration Benchtop
Water Tank capacity 30 L
Output of Pure water &ge; 10 L / hr.
Process Double Pass RO system
Configuration Benchtop
Water Tank capacity 30 L
Output of Pure water &ge; 20 L / hr.
Process Double Pass RO system
Configuration Benchtop
Water Tank capacity 30 L

Radio Frequency Identification Water Purification System

Radio Frequency Identification Water Purifier are equipped with a RFID Radio Frequency Identification Chip which helps keeping a check on the quality of water in real time. This helps in monitoring of parameters for the purifier

Output of Pure water &ge; 10 L / hr.
Process Double Pass RO system
Configuration Benchtop
Water Tank capacity 30 L
Output of Pure water &ge; 30 L / hr.
Process Double Pass RO system
Configuration Benchtop
Water Tank capacity 30 L
Output of Pure water &ge; 20 L / hr.
Process Double Pass RO system
Configuration Benchtop
Water Tank capacity 30 L