Radio Frequency Identification Water Purification System LRFW-B11 is a 30 L capacited revolutionary, modular design which helps in elimination of large amount of salts and other minerals from water using 2 stages of RO with the least TOC level i.e. < 3 ppb. Here the concentrate or reject stream is fed into a second RO system to maximize water recovery. The unique feature of this model is that it’s equipped with a RFID Radio Frequency Identification Chip which helps keeping a check on the quality of water in real time. It’s designed to deliver compliant purified water with clear quality parameters and care free maintenance
| Output of Pure water | ≥ 20 L / hr. |
|---|---|
| Process | Double Pass RO system |
| Configuration | Benchtop |
| Water Tank capacity | 30 L |
| Output of Ultrapure water | ≥ 1- 1.5 L / min |
| Resistivity at 25 °C | 18.25 M Ω. cm |
| Conductivity at 25 °C | ≤ 5 µs / cm |
| TOC | < 3 ppb |
| Pyrogens / Endotoxins | < 0.025 EU / ml |
| Bacteria | < 1 cfu / ml |
| Particles ( > 0.22 µm ) | < 1 / ml |
| Absorbance ( 254 nm ) | ≤ 0.001 |
| Reactive Silica ( SiO2 ) | < 0.01 ppm |
| Heavy metal | < 0.01 ppm |
| Electrical requirements | 220 V / 50 Hz |
| Power | ≥ 200 W |
| Dimensions ( L x W x H ) | 340 x 550 x 530 mm |
| Weight | 45 kg |
Used in PCR / DNA preparation, HPLC, LC-MS, electrophoresis, chemical analysis experiment, protein analysis
Radio Frequency Identification Water Purifier are equipped with a RFID Radio Frequency Identification Chip which helps keeping a check on the quality of water in real time. This helps in monitoring of parameters for the purifier
| Output of Pure water | ≥ 40 L / hr. |
| Process | Double Pass RO system |
| Configuration | Floor standing |
| Water Tank capacity | 80 L |
| Feed Water | Tap Water , TDS ≤ 400 ppm, Water Temperature: 5 to 40°C |
| Water Production Rate | ≥ 10 L/ h, Ultrapure Water Flow Rate 2 L/ min |
| Water Quality (Two Stage) | Ultrapure water: Resistivity: 18.25 MΩ.cm at 25°C conforms to ASTM CAP NCCLS |
| Free Chlorine | < 3 ppm |
| Output of Pure water | ≥ 50 L / hr. |
| Process | Double Pass RO system |
| Configuration | Floor Standing |
| Water Tank capacity | 80 L |
| Output of Pure water | ≥ 40 L / hr. |
| Process | Single Pass RO system |
| Configuration | Floor Standing |
| Water Tank capacity | 80 L |
| Output of Pure water | ≥ 30 L / hr. |
| Process | Single Pass RO system |
| Configuration | Benchtop |
| Water Tank capacity | 30 L |
| Output of Pure water | ≥ 30 L / hr. |
| Process | Double Pass RO system |
| Configuration | Benchtop |
| Water Tank capacity | 30 L |
| Output of Pure water | ≥ 10 L / hr. |
| Process | Double Pass RO system |
| Configuration | Benchtop |
| Water Tank capacity | 30 L |
| Output of Pure water | ≥ 50 L / hr. |
| Process | Single Pass RO system |
| Configuration | Floor Standing |
| Water Tank capacity | 80 L |
| Output of Pure water | ≥ 10 L / hr. |
| Process | Single Pass RO system |
| Configuration | Benchtop |
| Water Tank capacity | 30 L |
| Output of Pure water | ≥ 20 L / hr. |
| Process | Single Pass RO system |
| Configuration | Benchtop |
| Water Tank capacity | 30 L |
This water purification system is a combinational system that produces Type III water after RO and Type I water after deionization in one cycle
| Output of Pure water | ≥ 20 L / hr. |
| Water Type | Type I and Type III |
| Water Tank capacity | 30 L |
| Configuration | Benchtop |
| Output of Pure water | ≥ 30 L / hr. |
| Water Type | Type I and Type III |
| Water Tank capacity | 30 L |
| Configuration | Benchtop |
| Output of Pure water | ≥ 10 L / hr. |
| Water Type | Type I and Type III |
| Water Tank capacity | 30 L |
| Configuration | Benchtop |
Radio Frequency Identification Water Purifier are equipped with a RFID Radio Frequency Identification Chip which helps keeping a check on the quality of water in real time. This helps in monitoring of parameters for the purifier
| Output of Pure water | ≥ 30 L / hr. |
| Process | Double Pass RO system |
| Configuration | Benchtop |
| Water Tank capacity | 30 L |
| Output of Pure water | ≥ 20 L / hr. |
| Process | Double Pass RO system |
| Configuration | Benchtop |
| Water Tank capacity | 30 L |
| Output of Pure water | ≥ 10 L / hr. |
| Process | Double Pass RO system |
| Configuration | Benchtop |
| Water Tank capacity | 30 L |
UV water purification systems destroy the DNA of micro-organisms making the water contamination free. Water produced from UV water purification is contamination free water which is potable for consumption
| Output of Pure water | ≥ 10 L / hr. |
| Process | Double Pass RO system |
| Configuration | Benchtop |
| Water Tank capacity | 30 L |
| Output of Pure water | ≥ 30 L / hr. |
| Process | Double Pass RO system |
| Configuration | Benchtop |
| Water Tank capacity | 30 L |
| Output of Pure water | ≥ 20 L / hr. |
| Process | Double Pass RO system |
| Configuration | Benchtop |
| Water Tank capacity | 30 L |
It provides Type III level water which is required for chemical and physical inspection or for washing lab glassware’s
| Output of Pure water | ≥ 10 L / hr. |
| Water Type | Type III |
| Configuration | Benchtop |
| Process | Double Pass RO system |
| Output of Pure water | ≥ 20 L / hr. |
| Water Type | Type III |
| Configuration | Benchtop |
| Process | Double Pass RO system |
| Output of Pure water | ≥ 30 L / hr. |
| Water Type | Type III |
| Configuration | Benchtop |
| Process | Double Pass RO system |
| Output | 30 liters/hour |
| Flow rate | Up to 2 liters/minute (with pressure tank) |
| Pure water outlet | 2 reverse osmosis water, deionized water |
| Deionized Water Quality | Resistivity: 16 to 18.2 M Ω cm<br/> Bacteria: N/A<br/> Particle (>0.1 µm): N/A |
| Output | 30 liters/hour |
| Flow rate | Up to 2 liters/minute (with pressure tank) |
| Pure water outlet | 2 reverse osmosis water, deionized water |
| Deionized Water Quality | Resistivity: 16 to 18.2 M Ω cm<br/> Bacteria: N/A<br/> Particle (>0.1 µm): N/A |