Type II Water Purification System LTWP-A10 is a 30 L capacited modular design which meets the needs of basic laboratory water purifier. It provides Type II level water with consistency and reliability with a TOC level of < 20 ppb. Remove approximately 98% of inorganic ions and 99% of all dissolved organic substances.This system produce and reject water at the same time. Equipped with easy replaceable filters. It’s designed to deliver compliant purified water with clear quality parameters and care free maintenance.
| Output of Pure water | ≥ 10 L / hr. |
|---|---|
| Process | Single Pass RO system |
| Water Type | Type II |
| Water Tank capacity | 30 L |
| Configuration | Benchtop |
| Output of Ultrapure water | ≥ 1- 1.5 L / min |
| Resistivity at 25 °C | 10-16 M Ω. cm |
| Conductivity at 25 °C | ≤ 10 µs / cm |
| TOC | < 20 ppb |
| Absorbance ( 254 nm ) | ≤ 0.001 |
| Reactive Silica ( SiO2 ) | < 0.01 ppm |
| Heavy metal | < 0.01 ppm |
| Electrical requirements | 220 V / 50 Hz |
| Power | ≥ 100 W |
| Dimensions ( L x W x H ) | 340 x 550 x 530 mm |
| Weight | 35 kg |
This water purification system provides Type II level water with consistency and reliability. It removes approximately 98% of inorganic ions and 99 % of all dissolved organic substances
| Output of Pure water | ≥ 20 L / hr. |
| Process | Single Pass RO system |
| Water Type | Type II |
| Water Tank capacity | 30 L |
| Output of Pure water | ≥ 40 L / hr. |
| Process | Double Pass RO system |
| Water Type | Type II |
| Water Tank capacity | 80 L |
| Output of Pure water | ≥ 30 L / hr. |
| Process | Double Pass RO system |
| Water Type | Type II |
| Water Tank capacity | 30 L |
| Output of Pure water | ≥ 50 L / hr. |
| Process | Double Pass RO system |
| Water Type | Type II |
| Water Tank capacity | 80 L |
| Output of Pure water | ≥ 20 L / hr. |
| Process | Double Pass RO system |
| Water Type | Type II |
| Water Tank capacity | 30 L |
| Output of Pure water | ≥ 30 L / hr. |
| Process | Single Pass RO system |
| Water Type | Type II |
| Water Tank capacity | 30 L |
| Output of Pure water | ≥ 10 L / hr. |
| Process | Double Pass RO system |
| Water Type | Type II |
| Water Tank capacity | 30 L |
| Output of Pure water | ≥ 40 L / hr. |
| Process | Single Pass RO system |
| Water Type | Type II |
| Water Tank capacity | 80 L |
| Output of Pure water | ≥ 50 L / hr. |
| Process | Single Pass RO system |
| Water Type | Type II |
| Water Tank capacity | 80 L |
| Water quality | Two stage(Type III and type I) |
| Feed water | Tap waterTDS≤400ppm<hr> Water temperature: 5-40℃<hr> Type 3 water ≥10L/h |
| Conectivity | <5 μs/cm@25℃ |
| Resistivity | 18.25 MΩ.cm @ 25 ℃ |
| Output 2nd stage RO water | 90 liters/hour |
| Output ultrapure water | Up to 2 liters/minute (when tank is full) |
| Ultrapure Water Quality | Resistivity (25°C) 18.2 M Ω cm<br/> TOC: < 3ppb<br/> Bacteria: <0.1 cfu/ml<br/> Particle (>0.2 µm): <1/ml<br/> Endotoxin: <0.001EU/ml<br/> RNases: <1pg/ml<br/> DNases: <5pg/ml |
| RO Water Quality | Conductivity 1st stage RO water: Feed water Conductivity ×5 %<br/> Conductivity 2nd stage RO water: 1 to 5 µs/cm |
| Water quality | One stage (Type I) |
| Feed water | RO water /Distilled water<hr> Water temperature: 5 ~ 40℃ |
| Resistivity | 18.25 MΩ.cm @ 25 ℃ |
| TOC | < 5ppb |
Radio Frequency Identification Water Purifier are equipped with a RFID Radio Frequency Identification Chip which helps keeping a check on the quality of water in real time. This helps in monitoring of parameters for the purifier
| Output of Pure water | ≥ 30 L / hr. |
| Process | Double Pass RO system |
| Configuration | Benchtop |
| Water Tank capacity | 30 L |
| Output of Pure water | ≥ 20 L / hr. |
| Process | Double Pass RO system |
| Configuration | Benchtop |
| Water Tank capacity | 30 L |
| Output of Pure water | ≥ 10 L / hr. |
| Process | Double Pass RO system |
| Configuration | Benchtop |
| Water Tank capacity | 30 L |
| Output | 30 liters/hour |
| Flow rate | Up to 2 liters/minute (with pressure tank) |
| Pure water outlet | 2 reverse osmosis water, deionized water |
| Deionized Water Quality | Resistivity: 16 to 18.2 M Ω cm<br/> Bacteria: N/A<br/> Particle (>0.1 µm): N/A |
| Output | 30 liters/hour |
| Flow rate | Up to 2 liters/minute (with pressure tank) |
| Pure water outlet | 2 reverse osmosis water, deionized water |
| Deionized Water Quality | Resistivity: 16 to 18.2 M Ω cm<br/> Bacteria: N/A<br/> Particle (>0.1 µm): N/A |
It provides Type III level water which is required for chemical and physical inspection or for washing lab glassware’s
| Output of Pure water | ≥ 20 L / hr. |
| Water Type | Type III |
| Configuration | Benchtop |
| Process | Double Pass RO system |
| Output of Pure water | ≥ 10 L / hr. |
| Water Type | Type III |
| Configuration | Benchtop |
| Process | Double Pass RO system |
| Output of Pure water | ≥ 30 L / hr. |
| Water Type | Type III |
| Configuration | Benchtop |
| Process | Double Pass RO system |
UV water purification systems destroy the DNA of micro-organisms making the water contamination free. Water produced from UV water purification is contamination free water which is potable for consumption
| Output of Pure water | ≥ 20 L / hr. |
| Process | Double Pass RO system |
| Configuration | Benchtop |
| Water Tank capacity | 30 L |
| Output of Pure water | ≥ 30 L / hr. |
| Process | Double Pass RO system |
| Configuration | Benchtop |
| Water Tank capacity | 30 L |
| Output of Pure water | ≥ 10 L / hr. |
| Process | Double Pass RO system |
| Configuration | Benchtop |
| Water Tank capacity | 30 L |