LEV-B10 Engler Viscometer guarantees compliance with ASTM D1665 “Test Methods for Engler Viscosity of Petroleum Products” for determining kinetic viscosities of tars and their fluid products from ambient temperature to 100ºC (212ºF). It is designed and made as per “Asphalt Engler Viscosity Test (Engler Viscometer Methods)”.
| Graduated Flask | 200 ± 0.2 ml (50 ± 0.2 ml for bituminous materials) |
|---|---|
| Standard Water Value | 51 ± 1 s |
| Temperature Range | 0 ~ 100 °C |
| Ambient Temperature | 10 °C ~ 40 °C |
| Temperature Controlling Accuracy | ± 0.1 °C |
| Relative Humidity | ≤ 85 % |
| Timer | Max is 9999 s |
| Accuracy Of Timer | |
| Heating Power | 700 W |
| Dimension | 630 x 490 x 760 mm |
| Power Of Heater | |
| Total Power Consumption | ≤ 800 W |
| Power Supply | AC 220 V ± 10 %, 50 Hz |
| =#REF! |
It is extensively used for pharmaceutics, petroleum, chemical, scientific research etc.
| Graduated Flask | 100 ml |
| Standard Water Value | 51 ± 1 s |
| Temperature Range | 0 ~ 100 °C |
| Temperature Controlling Accuracy | ± 0.1 °C |
| Graduated Flask | 200 ± 0.2 ml |
| Standard Water Value | 51 ± 1 s |
| Temperature Range | 0 ~ 100 °C |
| Temperature Controlling Accuracy | ± 0.2 °C |
| Measurement range | ≥0.05 mg KOH/g |
| Potential measurement range | 0 to 1800.0 mV |
| Burette volume | 10 mL |
| Minimum titration volume | 0.001 ml |
| Ambient temperature | ≤ 35 °C |
| Relative humidity | ≤ 85 % |
| Precision of titration tube | Scale division is 0.02 ml |
| Total power consumption | ≤ 1200 W |
| Graduated flask | 100 ml，50 ml |
| Conical flask | 100ml |
| Separatory funnel | 250ml |
| Ambient temperature | (-10 )°C to 35 °C |
| Power supply | AC 220 V ± 5 % , 50Hz |
| Measurement range | 0 ~ 75 kV |
| Voltage rising rate | 3 kV ± 10 % / s |
| Distance between electrodes | 2.5 mm |
| Dimension | 390 x 260 x 590 mm |
| Total power consumption | ≤ 1200 W |
| Power supply | AC 220 V ± 10 %, 50 Hz |
| Heating power of water bath | 1000 W |
| Power supply | AC 220 V ± 10 %, 50 Hz |
| Temperature controlling range in water bath | RT ~ 90 ℃ ± 5 ℃ |
| Cooling bath temperature | (-35) ℃ ± 1 ℃ |
| Evaporation temperature | 35 ℃ ± 1 ℃ |
| Samples | 8 |
| Temperature | 100 ℃ |
| Temperature controlling accuracy | 0.1 ℃ |
| Flow meter | 3 ± 0.3 L / H oxygen |
| Samples | 6 |
| Temperature controlling mode | Automatic digital temperature |
| Temperature controlling range | Room temperature ~ 160 °C |
| Temperature controlling accuracy | ± 0.2 °C |
| Samples | 2 |
| Oil bath cubage | 30 L |
| Angle between bomb and water surface | 30 ° |
| Speed of rotary assembly | 100 ± 5 RPM |
| Calorimeter type | Isoperibol |
| Temperature range | 5 to 40°C |
| Measurement range | 5 to 40 MJ/ kg |
| Operation Mode | The outer barrel temperature is constant |
| Calorimeter type | Isoperibol |
| Temperature range | 5 to 40°C |
| Measurement range | 5 to 40 MJ/ kg |
| Operation Mode | A. Outer barrel temperature follows room temperature change mode Or B. Outer barrel temperature constant mode |
| Calorimeter type | Isoperibol |
| Oxygen filling | Fully automatic oxygen filling & releasing, fully automatic bomb raising & lowering |
| Bomb volume | 250 ml |
| Analysis time | < 8 min full test process: <10 min |
| Measurement range | 0 to 600 penetration scale |
| Timing controller | 5 sec, 8 sec, 10 sec, 12 sec, 30 sec and 60 sec |
| Time accuracy | ± 0.1 seconds |
| Resolution | 0.01 mm |
| Measurement range | 0 to 600 penetration scale |
| Timing controller | 5 sec or 60 sec |
| Time accuracy | ± 0.1 seconds |
| Resolution | 0.01 mm |
| Penetrometer |
|
||||||||||||||||||
| Circulatory Water Bath |
|