Labtron LAAT-A11 is designed as per ASTM D664-11a “Test Methods for Acid Number of Petroleum Products” and “Test Methods for Acidity of Gasoline, Kerosene, and Diesel oil”.
| Graduated flask | |
|---|---|
| Conical flask | |
| Separatory funnel | |
| Volumetric analysis | |
| Automatic acid titration | |
| Automatic potential control | |
| Measurement range | |
| Potential measurement range | |
| Burette volume | |
| Minimum titration volume | |
| Burette precision | |
| Precision | |
| Ambient temperature | ≤ 35 °C |
| Relative humidity | ≤ 85 % |
| Temperature compensation | |
| Preset adjustment range of end point | |
| Preset controlling range for titration | |
| Precision of titration tube | Scale division is 0.02 ml |
| Test tube | |
| Acidometer Full scale | |
| Acidometer Accuracy | |
| Heating power | |
| Total power consumption | ≤ 1200 W |
| Power supply | AC 220 V ± 10 %, 50 Hz |
| Dimension | 830 x 290 x 370 mm |
| Net weight |
It is used to determine acidity of gasoline, kerosene, and diesel oil, which don’t add ethyl liquids and acid value of petroleum products.
| Volumetric analysis | Titration condensation: 0.1 N;<br> Controlling accuracy: ≤ ± 0.02 ml |
| Automatic acid titration | Titration condensation: 0.1 N;<br> Controlling accuracy: ≤ ± 0.1 pH |
| Automatic potential control | Titration condensation: 0.1 N;<br> Controlling accuracy: ≤ 10 mV |
| Ambient temperature | 0 ~ 35 ℃ |
| Graduated flask | 100 ml，50 ml |
| Conical flask | 100ml |
| Separatory funnel | 250ml |
| Ambient temperature | (-10 )°C to 35 °C |
| Measurement range | ≥0.05 mg KOH/g |
| Potential measurement range | 0 to 1800.0 mV |
| Burette volume | 10 mL |
| Minimum titration volume | 0.001 ml |
| Capacity | 2.0 kVA |
| Speed of voltage increase | 2 k V/ s |
| Voltage inspection accuracy | 0.01 |
| Breakdown sensitivity | < 0.1 kV |
| Ambient Temperature Range | ≤ 35°C |
| Relative Humidity | ≤ 85% |
| Heating Mantle Cap Power | 1000 W × 2 |
| Sample Determination | 2 at a time |
| Ambient Temperature Range | ≤ 35°C |
| Relative Humidity | ≤ 85% |
| Heating Mantle Cap Power | 1000 W |
| Sample Determination | 1 at a time |
| Ambient Temperature | 10°C to 35°C |
| Measurement Range | 0 to 100 mg |
| Resolution | 0.1 µg |
| Max. Electrolysis Speed | 40 µg /s |
| Power supply | AC 220 V ± 10 %, 50 Hz |
| Temperature controlling range in water bath | RT ~ 90 ℃ ± 5 ℃ |
| Cooling bath temperature | (-35) ℃ ± 1 ℃ |
| Evaporation temperature | 35 ℃ ± 1 ℃ |
| Dimension | 390 x 260 x 590 mm |
| Total power consumption | ≤ 1200 W |
| Power supply | AC 220 V ± 10 %, 50 Hz |
| Heating power of water bath | 1000 W |
| Power supply | AC 220 V ± 5 % , 50Hz |
| Measurement range | 0 ~ 75 kV |
| Voltage rising rate | 3 kV ± 10 % / s |
| Distance between electrodes | 2.5 mm |
| Measurement range | 0 to 600 penetration scale |
| Timing controller | 5 sec or 60 sec |
| Time accuracy | ± 0.1 seconds |
| Resolution | 0.01 mm |
| Penetrometer |
|
||||||||||||||||||
| Circulatory Water Bath |
|
| Measurement range | 0 to 600 penetration scale |
| Timing controller | 5 sec, 8 sec, 10 sec, 12 sec, 30 sec and 60 sec |
| Time accuracy | ± 0.1 seconds |
| Resolution | 0.01 mm |
| Thermometer | 6 ℃ ~ 400 ℃ |
| Scale Division | 2 °C |
| Spout Aperture | 0.6 ~ 0.8 mm |
| Ambient Temperature | -10 ℃ ~ 50 ℃ |
| Ambient Temperature | 10 ℃ ~ 40 ℃ |
| Relative Humidity | ≤ 85 % |
| Temperature Measurement- Full Scale | Ambient temperature to ~ 400 ℃ |
| Temperature Measurement- Repeatability | ≤ 4 ℃ |
| Thermometer | 0 ℃ ~ 360 °C |
| Scale Division | 1 °C |
| Ambient Temperature | ≤ 35 °C |
| Relative Humidity | ≤ 85 % |