Labtron LAAT-A10 is deliberately fabricated to have high accuracy and easy operation mode. It is constructed as per ASTM-D664 “Test Methods for Water Soluble Acid and Alkali of Petroleum Products”.
| Graduated flask | 100 ml，50 ml |
|---|---|
| Conical flask | 100ml |
| Separatory funnel | 250ml |
| Volumetric analysis | |
| Automatic acid titration | |
| Automatic potential control | |
| Measurement range | |
| Potential measurement range | |
| Burette volume | |
| Minimum titration volume | |
| Burette precision | |
| Precision | |
| Ambient temperature | (-10 )°C to 35 °C |
| Relative humidity | ≤ 85 % |
| Temperature compensation | |
| Preset adjustment range of end point | |
| Preset controlling range for titration | |
| Precision of titration tube | |
| Test tube | Φ18 mm x 100 mm |
| Acidometer Full scale | 0 ~ 14.00 pH |
| Acidometer Accuracy | ± 0.01 pH |
| Heating power | 100 W ~ 1000 W |
| Total power consumption | Not more than 1200 W |
| Power supply | AC 220 V ± 10 %, 50 Hz |
| Dimension | 570 x 540 x 260 mm |
| Net weight |
It is used to determine water soluble acid and alkali in the liquid petroleum products, additive, lubricating grease, wax and waxy products.
| Measurement range | ≥0.05 mg KOH/g |
| Potential measurement range | 0 to 1800.0 mV |
| Burette volume | 10 mL |
| Minimum titration volume | 0.001 ml |
| Volumetric analysis | Titration condensation: 0.1 N;<br> Controlling accuracy: ≤ ± 0.02 ml |
| Automatic acid titration | Titration condensation: 0.1 N;<br> Controlling accuracy: ≤ ± 0.1 pH |
| Automatic potential control | Titration condensation: 0.1 N;<br> Controlling accuracy: ≤ 10 mV |
| Ambient temperature | 0 ~ 35 ℃ |
| Ambient temperature | ≤ 35 °C |
| Relative humidity | ≤ 85 % |
| Precision of titration tube | Scale division is 0.02 ml |
| Total power consumption | ≤ 1200 W |
| Temperature range | Room temperature to 1000 ºC |
| Temperature resolution | 0.1 ºC |
| Temperature fluctuation | ±0.1 ºC |
| Heating rate | 1 ~ 80 ºC / min |
| Experimental temperature range | -50 to 70°C |
| Test sample volume | 50 ml |
| Ambient temperature range | 10 to 40°C |
| Humidity | ≤ 85% |
| Measurement item | motor gasoline and diesel |
| measurement unit of octane is ON | 40 to 120 |
| Permissible error of octane | ± 0.5 max |
| Fluctuate range of octane | ± 0.2 max |
| Measuring Range For Aviation Gasoline | 86.0 to 105.0/MON |
| Measuring Range For Gasoline For Motor Vehicles | National standard: 65.0 to 110.0/RON<br/> National-V standard: 70 to 115.0/RON<br/> Blended gasoline: 75.0 to 120.0/RON<br/> Light gasoline: 50.0 to 85.0 /MON<br/> Isomerized gasoline: 85.0 to 120.0/RON<br/> Arene gasoline: 90.0 to 120.0/RON |
| Measuring Range For Ethanol | E93: 92.0 to 95.0/RON<br/> E97: 95.0 to 99.0/RON<br/> Judgement: 60.0 to 120.0/RON |
| Measuring Range For Automobile Diesel Fuels | Cetane number: 25 to 75/CN<br/> Cetane index: 20 to 80/CI |
| Evaporation bath type and size | Aluminum bath φ260 × 130 mm |
| Holes for testing | 5 pieces |
| Size of holes for testing cylinder | φ51 × 70 mm |
| Working temperature | 160 ℃ ~ 165℃ |
| Evaporation bath type and size | Aluminum block bath, φ260 × 130 mm |
| Holes for testing | 3 pieces |
| Size of holes for testing cylinder | φ51 × 70 mm |
| Flow rate display | Flow meter |
| Bath type | Oil bath |
| Bath capacity | 5000 ml ± 50 ml |
| Ambient temperature | Room temperature to 35 °C |
| Relative humidity | ≤ 85 % |
| Electric Muffle Furnace |
|
||||||||||||||||
| Temperature controller |
|
||||||||||||||||
| Electric heating plate |
|