Temperature and Humidity Test Chamber LTHC –A11 is designed to simulate constant climatic conditions for testing a wide variety of products for their quality, performance, shelf life and stability. It's used to simulate constant temperature and humidity conditions, thereby creating a physiologically ideal environment for product testing. A good temperature humidity chamber is essential for evaluating potential success or failure of a product in the field.
| Capacity | 80 L |
|---|---|
| Temperature range | (- 20 °C) to 150 °C |
| Low type | I – 40 °C, II – 70 °C |
| Environmental condition | 5 ℃ ~ + 40 ℃ ≤ 85 % RH |
| Humidity range | 20 % - 98 % RH |
| Temperature fluctuation | ± 0.5 °C |
| Temperature deviation | ± 2 °C |
| Humidity deviation | ± 2.5 % RH |
| Heating rate | 3 °C / min |
| Cooling rate | 1 °C / min |
| Temperature sensor | PTR Platinum resistance PT 100 Ω / MV A-class |
| Temperature resolution | ± 0.001 ℃ |
| Humidity sensor | Dry and wet bulb sensor |
| Humidity resolution | ± 1 % RH |
| Internal dimension | 400 × 400 × 500 mm |
| Overall dimension | 900 × 1100 × 1000 mm |
| Power supply | AC 220 , 50 Hz |
Extensively used in basic and advanced research, pharmaceutical industries, chemical industries, food and beverage industry.
Labtron offers temperature and humidity test chambers which are used in various industries to test large equipments such as automotive parts by controlling the temperature and humidity. It is highly stable and provides enough space to work.
| Capacity | 3150 L |
| Temperature range | -40℃ to 150℃ |
| Temperature cooling rate | 1℃ / min |
| Temperature heating rate | 1℃ / min |
| Capacity | 50 L |
| Temperature range | (- 20 °C) to 150 °C |
| Low type | I – 40 °C, II – 70 °C |
| Environmental condition | 5 ℃ ~ + 40 ℃ ≤ 85 % RH |
| Capacity | 800 L |
| Temperature range | (-20)℃ to 150 ℃ ,(-40) ℃ to 150 ℃ , (-70 )℃ to 150 ℃ |
| Temperature cooling rate | 1 ℃ / min |
| Overall dimension (D x W x H) | 1280 x 1550 x 2110 mm |
| Capacity | 800 L |
| Temperature range | (-70 )℃ to 150 ℃ |
| Temperature cooling rate | 5 ℃ / min |
| Overall dimension (D x W x H) | 1280 x 1550 x 2110 mm |
| Interior Volume | 700 L |
| Heat load | 1000 W |
| Temperature Range | 10℃ to +50 ℃ |
| Temperature Deviation in time | ± 0.1 to 0.3 ℃ |
| Capacity | 100 L |
| Temperature range | (-70 )℃ to 150 ℃ |
| Temperature cooling rate | 5 ℃ / min |
| Overall dimension (D x W x H) | 860 x 1050 x 1620 mm |
| Capacity | 225 L |
| Temperature range | (-20)℃ to 150 ℃ ,(-40) ℃ to 150 ℃ , (-70 )℃ to 150 ℃ |
| Temperature cooling rate | 1 ℃ / min |
| Overall dimension (D x W x H) | 960 x 1150 x 1860 mm |
| Capacity | 500 L |
| Temperature range | (-70 )℃ to 150 ℃ |
| Temperature cooling rate | 5 ℃ / min |
| Overall dimension (D x W x H) | 1180 x 1350 x 2010 mm |
| Capacity | 1000 L |
| Temperature range | (-70 )℃ to 150 ℃ |
| Temperature cooling rate | 5 ℃ / min |
| Overall dimension (D x W x H) | 1500 x 1550 x 2110 mm |
| Capacity | 1000 L |
| Temperature range | (-20)℃ to 150 ℃ ,(-40) ℃ to 150 ℃ , (-70 )℃ to 150 ℃ |
| Temperature cooling rate | 1 ℃ / min |
| Overall dimension (D x W x H) | 1500 x 1550 x 2110 mm |
| Capacity | 500 L |
| Temperature range | (-20)℃ to 150 ℃ ,(-40) ℃ to 150 ℃ , (-70 )℃ to 150 ℃ |
| Temperature cooling rate | 1 ℃ / min |
| Overall dimension (D x W x H) | 1180 x 1350 x 2010 mm |
| Capacity | 100 L |
| Temperature range | (-20)℃ to 150 ℃ ,(-40) ℃ to 150 ℃ , (-70 )℃ to 150 ℃ |
| Temperature cooling rate | 1 ℃ / min |
| Overall dimension (D x W x H) | 860 x 1050 x 1620 mm |
| Capacity | 150 L |
| Temperature range | 10 to 70°C |
| Temperature stability | High: ±0.5℃; Low: ±1℃ |
| Temperature uniformity | ±2°C |
| Capacity | 225 L |
| Temperature range | (-70 )℃ to 150 ℃ |
| Temperature cooling rate | 5 ℃ / min |
| Overall dimension (D x W x H) | 960 x 1150 x 1860 mm |
Labtron offers ozone test chambers which can simulate ozone atmospheric conditions to be used for aging cracking test of non-metal materials and rubber products, to determine the anti-ozone properties of the products.
| Diameter of holder (mm) | 600 |
| Length of each side (mm) | 220 |
| Temperature range | 0℃ ~ 100℃ |
| Humidity range | 30 % - 98 % R.H |
| Temperature range | 0℃ ~ 100℃ |
| Humidity range | 30 % - 98 % R.H |
| Temperature fluctuation | ± 0.5 ℃ |
| Speed rate for cooling | Ambient ~ 0 ℃ within 20 min |
| Diameter of holder (mm) | 400 |
| Length of each side (mm) | 180 |
| Temperature range | 0℃ ~ 100℃ |
| Humidity range | 30 % - 98 % R.H |
In order to increase the durability of product, we need to test its performance under various conditions. Keeping this in mind, Labtron presents sand test chambers which simulate dust and sand conditions in a controlled atmosphere.
| Temperature range | Ambient to + 50 ℃ |
| Relative Humidity | < 30 % RH |
| Normal wire diameter | 50 um |
| Normal width of a gap between wire | 75 um |
| Temperature range | Ambient to + 50 ℃ |
| Relative Humidity | < 30 % RH |
| Normal wire diameter | 50 um |
| Normal width of a gap between wire | 75 um |
| Temperature range | Ambient to + 50 ℃ |
| Relative Humidity | < 30 % RH |
| Normal wire diameter | 50 um |
| Normal width of a gap between wire | 75 um |
We manufacture UV test machine to simulate sunlight alongwith condenser and water spray system to simulate rain and dew. These chambers are used in various industries to detect the damage caused by environmental factors.
| UV Temperature | 50 °C to 75 °C |
| Testing Capacity | 48 piece (75 x 150 mm); 50 piece (75x 150 mm) |
| Weight | 136 kg |
| Water Consumption | Distilled water, 8liters per day |
| Temperature Range | RT + 100 °C ~ 630 °C |
| Humidity range | 30 % ~ 85 % RH |
| Testing Time | 20 hours |
| Testing Voltage | 120 V ~ 145 V |
| Temperature Range | RT + 100 °C ~ 850 °C |
| Humidity range | At 400 °C: R.H. is 40 % ~ 85 % / At 800 °C: R.H. is 30 % ~ 50 % |
| Testing Time | 20 hours |
| Testing Voltage | 120 V ~ 145 V (135 V) |
We manufacture Xenon test chambers which consist of xenon lamp to simulate environmental factors to test its effect on products. It is widely used in research, product development and quality control.
| Bandwidth Measurement (nm) | 280 ~ 800 |
| Specimen Capacity (pcs) | 28 |
| Specimen holder size (mm) | 80 × 15 |
| Chamber Temperature Range | Ambient ~ 100 ℃ ± 2 °C |
| Bandwidth Measurement (nm) | 300 - 420 |
| Specimen Capacity (pcs) | 34 |
| Specimen holder size (mm) | 80 × 15 |
| Chamber Temperature Range | Ambient ~ 100 ℃ ± 2 °C |
| Temperature Range | RT+50℃ to 70℃ |
| Temperature Fluctuation | ±3℃ |
| Cooling Way | Air-cooled |
| Raining Time | 0-99min adjustable |
Labtron offers wide range of salt spray corrosion test systems with ability to test the corrosive resistant of products. Our user friendly products suit our clients' requirement and hence, continue to be in demand.
| Testing room capacity | 326 L |
| Temperature range | Ambient to +60°C |
| Humidity range | 95 to 98% RH |
| Temperature Fluctuation | ± 0.5 ℃ |
| Testing room capacity | 410 L |
| Temperature range | Ambient to +60°C |
| Humidity range | 95 to 98% RH |
| Temperature Fluctuation | ± 0.5 ℃ |
| Testing room capacity | 110 L |
| Temperature range | Ambient to +60°C |
| Humidity range | 95 to 98% RH |
| Temperature Fluctuation | ± 0.5 ℃ |