Labtron’s plant growth chamber is designed with accurate control of temperature, light, humidity, CO2 and other environmental factors which are necessary for plant growth. These chambers are helpful for researchers to carryout different experiments on plants without any dependency on climatic factors.
| Chamber Volume | 800 L |
| Shelves | 3(PCS) |
| Display Resolution | 0.1 ℃ |
| Temperature Range | Without Lighting: 0 to 50℃ <br/> With lighting:10 to 50℃ |
| Chamber Volume | 450 L |
| Shelves | 3(PCS) |
| Display Resolution | 0.1 ℃ |
| Temperature Range | Without Lighting: 0 to 50℃ <br/> With lighting:10 to 50℃ |
| Chamber Volume | 300 L |
| Shelves | 3(PCS) |
| Display Resolution | 0.1 ℃ |
| Temperature Range | Without Lighting: 0 to 50℃ <br/> With lighting:10 to 50℃ |
We manufacture Xenon test chambers which consist of xenon lamp to simulate environmental factors to test its effect on products. It is widely used in research, product development and quality control.
| Temperature Range | RT+50℃ to 70℃ |
| Temperature Fluctuation | ±3℃ |
| Cooling Way | Air-cooled |
| Raining Time | 0-99min adjustable |
| Bandwidth Measurement (nm) | 300 - 420 |
| Specimen Capacity (pcs) | 34 |
| Specimen holder size (mm) | 80 × 15 |
| Chamber Temperature Range | Ambient ~ 100 ℃ ± 2 °C |
| Bandwidth Measurement (nm) | 280 ~ 800 |
| Specimen Capacity (pcs) | 28 |
| Specimen holder size (mm) | 80 × 15 |
| Chamber Temperature Range | Ambient ~ 100 ℃ ± 2 °C |
Labtron offers wide range of salt spray corrosion test systems with ability to test the corrosive resistant of products. Our user friendly products suit our clients' requirement and hence, continue to be in demand.
| Testing room capacity | 110 L |
| Temperature range | Ambient to +60°C |
| Humidity range | 95 to 98% RH |
| Temperature Fluctuation | ± 0.5 ℃ |
| Testing room capacity | 410 L |
| Temperature range | Ambient to +60°C |
| Humidity range | 95 to 98% RH |
| Temperature Fluctuation | ± 0.5 ℃ |
| Testing room capacity | 326 L |
| Temperature range | Ambient to +60°C |
| Humidity range | 95 to 98% RH |
| Temperature Fluctuation | ± 0.5 ℃ |
In order to increase the durability of product, we need to test its performance under various conditions. Keeping this in mind, Labtron presents sand test chambers which simulate dust and sand conditions in a controlled atmosphere.
| Temperature range | Ambient to + 50 ℃ |
| Relative Humidity | < 30 % RH |
| Normal wire diameter | 50 um |
| Normal width of a gap between wire | 75 um |
| Temperature range | Ambient to + 50 ℃ |
| Relative Humidity | < 30 % RH |
| Normal wire diameter | 50 um |
| Normal width of a gap between wire | 75 um |
| Temperature range | Ambient to + 50 ℃ |
| Relative Humidity | < 30 % RH |
| Normal wire diameter | 50 um |
| Normal width of a gap between wire | 75 um |
Labtron offers ozone test chambers which can simulate ozone atmospheric conditions to be used for aging cracking test of non-metal materials and rubber products, to determine the anti-ozone properties of the products.
| Diameter of holder (mm) | 600 |
| Length of each side (mm) | 220 |
| Temperature range | 0℃ ~ 100℃ |
| Humidity range | 30 % - 98 % R.H |
| Diameter of holder (mm) | 400 |
| Length of each side (mm) | 180 |
| Temperature range | 0℃ ~ 100℃ |
| Humidity range | 30 % - 98 % R.H |
| Temperature range | 0℃ ~ 100℃ |
| Humidity range | 30 % - 98 % R.H |
| Temperature fluctuation | ± 0.5 ℃ |
| Speed rate for cooling | Ambient ~ 0 ℃ within 20 min |