Xenon Test Chamber LXC-A22 is a benchtop model with single xenon arc lamp and is available with optional automatic water supply. A large spectrum of environmental condition based test materials can be tested using this model.
| Temperature Range | RT+50℃ to 70℃ |
|---|---|
| Temperature Fluctuation | ±3℃ |
| Cooling Way | Air-cooled |
| Raining Time | 0-99min adjustable |
| Irradiation Strength | 400-700w/m2 |
| Wavelength | 290-800nm |
| Dimming Range | 5%-100% |
| Lamp Power | 2.5kW |
| Total Power | 4.5kW |
| Power Supply | AC380V±10% 50±0.5Hz (three-phase five wire system) |
| Interior Size(W×D×H) | 500×320×300mm |
| Exterior Size(W×D×H) | 900×800×750mm |
| Standard Configurations | Stainless steel sample holder, one air-cooled xenon lamp, one portable irradiation meter |
It is used in different industries such as plastic, paint, dyeing, automobile, motorcycle, petrochemical, textile, leather products etc.
We manufacture Xenon test chambers which consist of xenon lamp to simulate environmental factors to test its effect on products. It is widely used in research, product development and quality control.
| Bandwidth Measurement (nm) | 280 ~ 800 |
| Specimen Capacity (pcs) | 28 |
| Specimen holder size (mm) | 80 × 15 |
| Chamber Temperature Range | Ambient ~ 100 ℃ ± 2 °C |
| Bandwidth Measurement (nm) | 300 - 420 |
| Specimen Capacity (pcs) | 34 |
| Specimen holder size (mm) | 80 × 15 |
| Chamber Temperature Range | Ambient ~ 100 ℃ ± 2 °C |
| Bandwidth Measurement (nm) | 280 ~ 800 |
| Specimen Capacity (pcs) | 28 |
| Specimen holder size (mm) | 80 × 15 |
| Chamber Temperature Range | Ambient ~ 100 ℃ ± 2 °C |
| Bandwidth Measurement (nm) | 300 - 420 |
| Specimen Capacity (pcs) | 34 |
| Specimen holder size (mm) | 80 × 15 |
| Chamber Temperature Range | Ambient ~ 100 ℃ ± 2 °C |
In order to increase the durability of product, we need to test its performance under various conditions. Keeping this in mind, Labtron presents sand test chambers which simulate dust and sand conditions in a controlled atmosphere.
| Temperature range | Ambient to + 50 ℃ |
| Relative Humidity | < 30 % RH |
| Normal wire diameter | 50 um |
| Normal width of a gap between wire | 75 um |
| Temperature range | Ambient to + 50 ℃ |
| Relative Humidity | < 30 % RH |
| Normal wire diameter | 50 um |
| Normal width of a gap between wire | 75 um |
| Temperature range | Ambient to + 50 ℃ |
| Relative Humidity | < 30 % RH |
| Normal wire diameter | 50 um |
| Normal width of a gap between wire | 75 um |
Labtron offers ozone test chambers which can simulate ozone atmospheric conditions to be used for aging cracking test of non-metal materials and rubber products, to determine the anti-ozone properties of the products.
| Diameter of holder (mm) | 600 |
| Length of each side (mm) | 220 |
| Temperature range | 0℃ ~ 100℃ |
| Humidity range | 30 % - 98 % R.H |
| Diameter of holder (mm) | 400 |
| Length of each side (mm) | 180 |
| Temperature range | 0℃ ~ 100℃ |
| Humidity range | 30 % - 98 % R.H |
| Temperature range | 0℃ ~ 100℃ |
| Humidity range | 30 % - 98 % R.H |
| Temperature fluctuation | ± 0.5 ℃ |
| Speed rate for cooling | Ambient ~ 0 ℃ within 20 min |
Drug test chambers are designed to conduct stability and shelf life studies on drug and drugs components.
| Interior Volume | 500 L |
| Heat load | 1000 W |
| Temperature Range | 0℃ to 100 ℃ |
| Temperature Deviation in time | ± 2.0 ℃ |
| Interior Volume | 225 L |
| Heat load | 1000 W |
| Temperature Range | 0℃ to 100 ℃ |
| Temperature Deviation in time | ± 2.0 ℃ |
| Interior Volume | 100 L |
| Heat load | 1000 W |
| Temperature Range | 0℃ to 100 ℃ |
| Temperature Deviation in time | ± 2.0 ℃ |
We manufacture UV test machine to simulate sunlight alongwith condenser and water spray system to simulate rain and dew. These chambers are used in various industries to detect the damage caused by environmental factors.
| Temperature Range | RT + 100 °C ~ 630 °C |
| Humidity range | 30 % ~ 85 % RH |
| Testing Time | 20 hours |
| Testing Voltage | 120 V ~ 145 V |
| Temperature Range | RT + 100 °C ~ 850 °C |
| Humidity range | At 400 °C: R.H. is 40 % ~ 85 % / At 800 °C: R.H. is 30 % ~ 50 % |
| Testing Time | 20 hours |
| Testing Voltage | 120 V ~ 145 V (135 V) |
| UV Temperature | 50 °C to 75 °C |
| Testing Capacity | 48 piece (75 x 150 mm); 50 piece (75x 150 mm) |
| Weight | 136 kg |
| Water Consumption | Distilled water, 8liters per day |
Labtron’s plant growth chamber is designed with accurate control of temperature, light, humidity, CO2 and other environmental factors which are necessary for plant growth. These chambers are helpful for researchers to carryout different experiments on plants without any dependency on climatic factors.
| Chamber Volume | 300 L |
| Shelves | 3(PCS) |
| Display Resolution | 0.1 ℃ |
| Temperature Range | Without Lighting: 0 to 50℃ <br/> With lighting:10 to 50℃ |
| Chamber Volume | 450 L |
| Shelves | 3(PCS) |
| Display Resolution | 0.1 ℃ |
| Temperature Range | Without Lighting: 0 to 50℃ <br/> With lighting:10 to 50℃ |
| Chamber Volume | 800 L |
| Shelves | 3(PCS) |
| Display Resolution | 0.1 ℃ |
| Temperature Range | Without Lighting: 0 to 50℃ <br/> With lighting:10 to 50℃ |