Ozone Test Chamber LOC-A12 is specifically designed to detect the concentration of ozone with the help of ozone detector. Along with low maintenance and noiseless generator this machine has a well-built corrosion resistant body.
| Diameter of holder (mm) | 600 |
| Length of each side (mm) | 220 |
| Temperature range | 0℃ ~ 100℃ |
| Humidity range | 30 % - 98 % R.H |
| Temperature fluctuation | ± 0.5 ℃ |
| Speed rate for cooling | Ambient ~ 0 ℃ within 20 min |
| Timing range | 0 ~ 999 hours |
| Ozone concentration | 1 ~ 1000PPHM |
| Sample holder rotate speed | 0 ~ 10 r/min (adjustable) |
| Clamps tensile stretch | 5 % ~ 35 % |
| Max. ozone concentration | 120 g O<sub>3</sub>/m³ |
| Ozone output | 3.5 g O<sub>3</sub>/h (oxygen input, flow rate 100L/h) |
| Nominal power | 7500 W |
| Internal dimensions | 700 × 800 × 900 mm |
| Overall dimensions (mm) | 1180 × 1350 × 2010 mm |
| Power & voltage | AC 380 V 50Hz |
Labtron offers ozone test chambers which can simulate ozone atmospheric conditions to be used for aging cracking test of non-metal materials and rubber products, to determine the anti-ozone properties of the products.
| Diameter of holder (mm) | 400 |
| Length of each side (mm) | 180 |
| Temperature range | 0℃ ~ 100℃ |
| Diameter of holder (mm) | 700 |
| Length of each side (mm) | 350 |
| Temperature range | 0℃ ~ 100℃ |
| Diameter of holder (mm) | 900 |
| Length of each side (mm) | 460 |
| Temperature range | 0℃ ~ 100℃ |
Drug test chambers are designed to conduct stability and shelf life studies on drug and drugs components.
| Interior Volume | 225 L |
| Heat load | 1000 W |
| Temperature Range | 0℃ to 100 ℃ |
| Interior Volume | 1000 L |
| Heat load | 1000 W |
| Temperature Range | 0℃ to 100 ℃ |
| Volume | 500 L |
| Temperature Range(without illumination) | 0 - 65 °C |
| Interior Volume | 500 L |
| Heat load | 1000 W |
| Temperature Range | 0℃ to 100 ℃ |
| Volume | 150 L |
| Temperature Range(without illumination) | 0 - 65 °C |
| Volume | 250 L |
| Temperature Range(without illumination) | 0 - 65 °C |
| Interior Volume | 800 L |
| Heat load | 1000 W |
| Temperature Range | 0℃ to 100 ℃ |
| Interior Volume | 100 L |
| Heat load | 1000 W |
| Temperature Range | 0℃ to 100 ℃ |
Labtron’s plant growth chamber is designed with accurate control of temperature, light, humidity, CO2 and other environmental factors which are necessary for plant growth. These chambers are helpful for researchers to carryout different experiments on plants without any dependency on climatic factors.
Labtron offers wide range of salt spray corrosion test systems with ability to test the corrosive resistant of products. Our user friendly products suit our clients' requirement and hence, continue to be in demand.
| Testing room capacity | 780 L |
| Temperature range | Ambient to +60°C |
| Humidity range | 95% to 98% RH |
| Testing room capacity | 1030 L |
| Temperature range | Ambient to +60°C |
| Humidity range | 95% to 98% RH |
| Testing room capacity | 1600 L |
| Temperature range | Ambient to +60°C |
| Humidity range | 95% to 98% RH |
| Testing room capacity | 410 L |
| Temperature range | Ambient to +60°C |
| Humidity range | 95 to 98% RH |
| Testing room capacity | 110 L |
| Temperature range | Ambient to +60°C |
| Humidity range | 95 to 98% RH |
| Testing room capacity | 326 L |
| Temperature range | Ambient to +60°C |
| Humidity range | 95 to 98% RH |
In order to increase the durability of product, we need to test its performance under various conditions. Keeping this in mind, Labtron presents sand test chambers which simulate dust and sand conditions in a controlled atmosphere.
| Temperature range | Ambient to + 50 ℃ |
| Relative Humidity | < 30 % RH |
| Normal wire diameter | 50 um |
| Temperature range | Ambient to + 50 ℃ |
| Relative Humidity | < 30 % RH |
| Normal wire diameter | 50 um |
| Temperature range | Ambient to + 50 ℃ |
| Relative Humidity | < 30 % RH |
| Normal wire diameter | 50 um |
| Temperature range | Ambient to + 50 ℃ |
| Relative Humidity | < 30 % RH |
| Normal wire diameter | 50 um |
Labtron offers temperature and humidity test chambers which are used in various industries to test large equipments such as automotive parts by controlling the temperature and humidity. It is highly stable and provides enough space to work.
| Capacity | 225 L |
| Temperature range | (-70 )℃ to 150 ℃ |
| Temperature cooling rate | 5 ℃ / min |
| Capacity | 50 L |
| Temperature range | (- 20 °C) to 150 °C |
| Low type | I – 40 °C, II – 70 °C |
| Capacity | 500 L |
| Temperature range | (-70 )℃ to 150 ℃ |
| Temperature cooling rate | 5 ℃ / min |
| Capacity | 3150 L |
| Temperature range | -40℃ to 150℃ |
| Temperature cooling rate | 1℃ / min |
| Capacity | 800 L |
| Temperature range | (-70 )℃ to 150 ℃ |
| Temperature cooling rate | 5 ℃ / min |
| Capacity | 1000 L |
| Temperature range | (-20)℃ to 150 ℃ ,(-40) ℃ to 150 ℃ , (-70 )℃ to 150 ℃ |
| Temperature cooling rate | 1 ℃ / min |
| Capacity | 500 L |
| Temperature range | (-20)℃ to 150 ℃ ,(-40) ℃ to 150 ℃ , (-70 )℃ to 150 ℃ |
| Temperature cooling rate | 1 ℃ / min |
| Capacity | 100 L |
| Temperature range | (-70 )℃ to 150 ℃ |
| Temperature cooling rate | 5 ℃ / min |
| Capacity | 150 L |
| Temperature range | 10 to 70°C |
| Temperature stability | High: ±0.5℃; Low: ±1℃ |
| Interior Volume | 700 L |
| Heat load | 1000 W |
| Temperature Range | 10℃ to +50 ℃ |
| Capacity | 225 L |
| Temperature range | (-20)℃ to 150 ℃ ,(-40) ℃ to 150 ℃ , (-70 )℃ to 150 ℃ |
| Temperature cooling rate | 1 ℃ / min |
| Capacity | 80 L |
| Temperature range | (- 20 °C) to 150 °C |
| Low type | I – 40 °C, II – 70 °C |
| Capacity | 800 L |
| Temperature range | (-20)℃ to 150 ℃ ,(-40) ℃ to 150 ℃ , (-70 )℃ to 150 ℃ |
| Temperature cooling rate | 1 ℃ / min |
| Capacity | 1000 L |
| Temperature range | (-70 )℃ to 150 ℃ |
| Temperature cooling rate | 5 ℃ / min |
| Capacity | 100 L |
| Temperature range | (-20)℃ to 150 ℃ ,(-40) ℃ to 150 ℃ , (-70 )℃ to 150 ℃ |
| Temperature cooling rate | 1 ℃ / min |
We manufacture UV test machine to simulate sunlight alongwith condenser and water spray system to simulate rain and dew. These chambers are used in various industries to detect the damage caused by environmental factors.
| Temperature Range | RT + 100 °C ~ 630 °C |
| Humidity range | 30 % ~ 85 % RH |
| Testing Time | 20 hours |
| Temperature Range | RT + 100 °C ~ 850 °C |
| Humidity range | At 400 °C: R.H. is 40 % ~ 85 % / At 800 °C: R.H. is 30 % ~ 50 % |
| Testing Time | 20 hours |
We manufacture Xenon test chambers which consist of xenon lamp to simulate environmental factors to test its effect on products. It is widely used in research, product development and quality control.
| Bandwidth Measurement (nm) | 300 - 420 |
| Specimen Capacity (pcs) | 34 |
| Specimen holder size (mm) | 80 × 15 |
| Bandwidth Measurement (nm) | 280 ~ 800 |
| Specimen Capacity (pcs) | 28 |
| Specimen holder size (mm) | 80 × 15 |
| Bandwidth Measurement (nm) | 280 ~ 800 |
| Specimen Capacity (pcs) | 28 |
| Specimen holder size (mm) | 80 × 15 |
| Temperature Range | RT+50℃ to 70℃ |
| Temperature Fluctuation | ±3℃ |
| Cooling Way | Air-cooled |
| Bandwidth Measurement (nm) | 300 - 420 |
| Specimen Capacity (pcs) | 34 |
| Specimen holder size (mm) | 80 × 15 |
