info@labtron.org
+44 2080 043 608
Logo
Dry bath incubator LDBI-A11

Dry bath incubator LDBI-A11

Dry bath incubator LDBI-A11 is a precise, reliable and easy-to-use product that uses high purity aluminum as a heat conduction medium. It is fitted with a microprocessor controlled system along with digital temperature display, buzzer alarm function and in-built over temperature protection device. In addition, it has a wide temperature range and is available in single, dual and four block models.

Temperature range RT. 5°C ~ 130°C
Temperature control range
Temperature setting range
Temperature accuracy ± 0.5 °C at 40 °C ; ± 1 °C at 120°C
Temperature uniformity ± 0.5 °C
Temperature stability
Block quantity 4
Heating time ≤ 20 min (25 °C ~ 130 °C)
Cooling time
Display accuracy 0.1 °C
Time range 1 min - 99 hr. 59 min
Auto warming
Auto running
Auto heating
Auto resume to run
Multi points running
Multi points running circularly
Voltage 220 V,50 / 60 Hz
Power 600 W
Fuse
Dimension (L x W x H) 360 x 220 x 100 mm
Net weight 8 kg
Gross Weight 8.0 kg
  • Microprocessor controlled system
  • High purity aluminum as a heat conduction medium instead of traditional water bath device
  • Real time temperature display
  • Mechanized fault detection and buzzer alarm function
  • Uncomplicated cleaning, replacement and disinfection of blocks
  • In-built over temperature protection device
  • More reliable to use with two redundant hardware circuit design
  • Wide temperature range
  • Highly precise
  • User-friendly
  • 12-months warranty
Model Diameter of test tube No. of test tubes
DBA-01 6 mm 48
DBA-02 7 mm 48
DBA-03 10 mm 24
DBA-04 12 mm 24
DBA-05 13 mm 24
DBA-06 15 mm 16
DBA-07 16 mm 16
DBA-08 19 mm 12
DBA-09 20 mm 12
DBA-10 26 mm 8
DBA-11 28 mm 4
DBA-12 40 mm 3
DBA-13 0.2 ml centrifuge tube 48
DBA-14 0.5 ml centrifuge tube 48
DBA-15 1.5 ml centrifuge tube 24
DBA-16 2.0 ml centrifuge tube 24
DBA-17 0.2 ml well micro plate 96

Dry bath incubators can be used for sample preparation, electrophoresis gel degeneration etc. They also find wide applicability in fields like molecular biology, microbiology, biochemistry and genetics.

Related Products of Dry Bath Incubator

Dry bath incubator LDBI-A20

Dry bath incubator LDBI-A20
Temperature range RT. 5°C ~ 100°C
Temperature accuracy ≤ ± 0.3°C
Temperature uniformity ≤ ± 0.3 °C
Temperature stability ± 0.3°C
Dry bath incubator LDBI-A30

Dry bath incubator LDBI-A30
Temperature control range RT. (-30) °C - 100°C
Temperature setting range (-10) ℃ - 100 ℃
Temperature accuracy ≤ ± 0.3 °C
Temperature uniformity ≤ ± 0.3 °C
Dry bath incubator LDBI-A10

Dry bath incubator LDBI-A10
Temperature range RT. 5°C ~ 160°C
Temperature accuracy ± 0.5 °C at 40 °C ; ± 1 °C at 120°C
Temperature uniformity ± 0.5 °C
Block quantity 1 or 2
Dry bath incubator LDBI-A21
Dry bath incubator LDBI-A21
Temperature range RT. 5°C ~ 100°C
Temperature setting range 0 °C - 100 °C
Temperature accuracy ≤ ± 0.3 °C
Temperature uniformity ≤ ± 0.3 °C

Biochemical Incubator

image-name

Biochemical Incubator LBCI-A11
Capacity 150 L
Temperature range 0 to 60°C
Accuracy ± 0.5°C
Ambient temperature 0 to 60°C
image-name

Biochemical Incubator LBCI-A12
Capacity 250 L
Temperature range 0 to 60°C
Accuracy ± 0.5°C
Ambient temperature 0 to 60°C
image-name
Biochemical Incubator LBCI-A10
Capacity 100 L
Temperature range 0 to 60°C
Accuracy ± 0.5°C
Ambient temperature 0 to 60°C

Roller Bottle Incubator

image-name
Roller Bottle Incubator LRBI-A10
Temperature range 5 to 60°C
Temperature uniformity ±0.5°C (ambient temperature 25°C, set value 37°C, 5 % no load)
Temperature fluctuation ±0.2°C (ambient temperature 25°C, set value 37°C, 5 % no load)
CO<sub>2</sub> Concentration range 0 to 20 %

Water Jacketed Incubator

image-name

Water-Jacketed Incubator LWJI-B11
Chamber Volume 80 L
Shelves 2(pcs)
Display Resolution 0.1 ℃
Heating Method Water Temperature
image-name

Water-Jacketed Incubator LWJI-B10
Chamber Volume 50 L
Shelves 2(pcs)
Display Resolution 0.1 ℃
Heating Method Water Temperature
image-name
Water-Jacketed Incubator LWJI-B12
Chamber Volume 160 L
Shelves 2(pcs)
Display Resolution 0.1 ℃
Heating Method Water Temperature

Portable Incubator

image-name
Portable Incubator LPI-A10
Air cycle Mode Gravity air convection
Function
Temperature range RT +5 to 50 ℃
Temperature resolution ratio 0.1 ℃
Temperature motion ± 0.5 ℃
Temperature uniformity ± 1.5 ℃
Body structure
Inner chamber Mirror stainless steel
Outer shell Cold rolling steel electrostatic spraying exterior
Insulation layer 6.5 cm polyurethane interlayer
Heater Nickel and chromium alloy heating wire
Controller
Temperature controller PID Intelligent
Temperature setting mode Touch button setting
Display mode LED
Time setting range 0 to 9999 min
Operation function Fixed temperature operation, Timing function, Auto stop
Additional function Sensor deviation correction, Temperature overshoot self-tuning, Internal parameter locking, Power-off parameter memory
Sensor CU50
image-name

Portable Incubator LPI-A11
Air cycle Mode Natural air convection
Function
Temperature range RT +5 to 80 ℃
Temperature resolution ratio 1 ℃
Temperature motion ± 1.0 ℃
Temperature uniformity ± 1.5 ℃
Body structure
Inner chamber Stainless steel
Outer shell Galvanized steel
Insulation layer Polyurethane interlayer
Heater Explosion proof alloy heating wire
Controller
Temperature controller PID Intelligent
Temperature setting mode Touch button setting
Display mode HD bright LED
Time setting range 0 to 9999 min
Operation function Fixed temperature operation, Timing function, Auto stop
Additional function Sensor deviation correction, Temperature overshoot self-tuning, Internal parameter locking, Power-off parameter memory
Sensor Temperature and humidity sensor
image-name

Portable Incubator LPI-A12
Air cycle Mode Natural air convection
Function
Temperature range RT +5 to 250℃
Temperature resolution ratio 1 ℃
Temperature motion ± 1.0 ℃
Temperature uniformity ± 1.5 ℃
Body structure
Inner chamber Stainless steel
Outer shell Galvanized steel
Insulation layer Polyurethane interlayer
Heater Explosion proof alloy heating wire
Controller
Temperature controller PID Intelligent
Temperature setting mode Touch button setting
Display mode HD bright LED
Time setting range 0 to 9999 min
Operation function Fixed temperature operation, Timing function, Auto stop
Additional function Sensor deviation correction, Temperature overshoot self-tuning, Internal parameter locking, Power-off parameter memory
Sensor Temperature and humidity sensor

Drosophila Incubator

image-name
Drosophila Incubator LDRI-A12
Capacity 450 L
Illumination type 3-side illumination
Illumination source Fluorescent lamp
Lighting illumination 0 to 20000 lx
image-name
Drosophila Incubator LDRI-A11
Capacity 350 L
Illumination type 3-side illumination
Illumination source Fluorescent lamp
Lighting illumination 0 to 20000 lx
image-name

Drosophila Incubator LDRI-A10
Capacity 250 L
Illumination type 3-side illumination
Illumination source Fluorescent lamp
Lighting illumination 0 to 12000 lx