Oxidation Stability Tester (Lubricating Grease) LOST-D20 is a benchtop unit and offers temperature range of 150°C with precision of ± 0.1°C. Easy to use, safe, reliable and is a small size tester, occupies less space. It is applicable for determination of oxidation stability of grease by oxygen bomb method.
| Temperature Range | Ambient to 150℃ |
|---|---|
| Temperature Precision | ± 0.1°C |
| Test Unit | 2 units |
| Heating Power | 1800 W |
| Ambient Temperature | (Room temperature to 35°C |
| Relative Humidity | ≤ 85 % |
| Power Supply | AC (220 ± 10 %) V, 50 Hz |
Oxidation Stability Tester is primarily used in quality control, petroleum, chemical research, university and power. It is also used in testing of lubricant oil, fuel oil and crude oil.
| Type | Compact; Desktop |
| Design | Integrated |
| Bath | Metal bath (without water usage) |
| Temperature control point of metal bath | 100℃ ± 1℃ |
| Samples | 6 |
| Temperature controlling mode | Automatic digital temperature |
| Temperature controlling range | Room temperature ~ 160 °C |
| Temperature controlling accuracy | ± 0.2 °C |
| Samples | 2 |
| Oil bath cubage | 30 L |
| Angle between bomb and water surface | 30 ° |
| Speed of rotary assembly | 100 ± 5 RPM |
| Samples | 8 |
| Temperature | 100 ℃ |
| Temperature controlling accuracy | 0.1 ℃ |
| Flow meter | 3 ± 0.3 L / H oxygen |
| Heating power | 2 kW |
| Cooling power | 0.5 kW |
| Steam temperature | 0 to 400℃ |
| Oven temperature | 0 to 500℃ |
| Graduated flasks | 100 ml |
| Scale division of graduated flask | 1ml |
| Distillation flask | 125 ml |
| Ambient temperature | ≤ 35 °C |
| Ambient temperature | -10°C to 35°C |
| Relative humidity | ≤ 85 % |
| Thermometer | Each one for 70°C to 90°C , 100°C to120°C , and 125°C to 150°C |
| Scale division | 0.1 ℃ |
| Temperature range | Room temperature to 1000 ºC |
| Temperature resolution | 0.1 ºC |
| Temperature fluctuation | ±0.1 ºC |
| Heating rate | 1 ~ 80 ºC / min |
| Viscosity measurement range | 10 ~ 2000000 MPa•s |
| Ambient temperature | 5 °C ~ 35 °C |
| Ambient humidity | Not more than 80 % |
| Spindles | Four spindles of No.1 ~ 4 |
| Ambient temperature | 10 °C ~ 40 ℃ |
| Relative humidity | ≤ 80 % |
| Ignition Mode | electron igniter / gas flame |
| Temperature range | Room Temperature ~ 300 ℃ |
| Ambient temperature | 10 °C ~ 40 °C |
| Relative humidity | ≤ 80 % |
| Measurement Range | Ambient Temperature ~ 250 °C |
| Flash Point | Lower than 104 °C , error is 2 °C; Higher than 104 °C , error is 6 °C |
| Ambient temperature | ≤ 35 °C |
| Relative humidity | ≤ 85 % |
| Temperature range | 5 °C ~ 110 °C, Each scale division is 0.5 °C; 20 °C ~ 150 °C, Each scale division is 1.0 °C; 90 °C ~ 370 °C, Each scale division is 2 °C |
| Aperture of ignition device | 0.8 mm |
| Temperature controlling accuracy | ± 0.5 ℃ |
| Refrigeration system | New-type refrigeration compressor |
| Cold trough | Two holes in one trough, and same temperature |
| Ambient temperature | ≤ 30 ℃ |
| Ambient temperature | (-10)℃ ~ 35 ℃ |
| Relative humidity | ≤ 85 % |
| Sample cup Inner diameter | 31.0 ~ 32.0 mm |
| Sample cup Wall thickness | 1.0 ~ 1.5 mm |
| Refrigeration system | New-type refrigeration compressor |
| Controlling temperature of cold trough | Cold trough I: RT ~ (-51) °C, ± 1°; Cold trough II:RT ~ (-80) °C, ± 1 °C |
| Ambient temperature | ≤ 30 ℃ |
| Relative humidity | ≤ 85 % |