LCFP-A13 is designed with RS-323 and 485 computer ports which can calibrate the effect of barometric pressure to the test and calculate the modified value. It modifies system deviation automatically and can simulate and show temperature-time curve. It is designed as per “Test Methods for Flash Point of Petroleum Products (Closed Cup Methods)” ASTM D93.
| Ambient temperature | 10 °C ~ 40 ℃ |
|---|---|
| Relative humidity | ≤ 80 % |
| Ignition Mode | electron igniter / gas flame |
| Temperature range | Room Temperature ~ 300 ℃ |
| Aperture of ignition device | |
| Standard oil cup-Inner diameter | |
| Standard oil cup- Depth | |
| Standard oil cup- Depth of Marked line on the oil cup | |
| Standard oil cup-Oil sample cubage | |
| Stirring speed | |
| Stirring blade | |
| Sample temperature rising rate | |
| Measurement Range | Room Temperature ~ 300 ℃ |
| Flash Point | |
| Resolution | 0.1 ℃ |
| Repeatability | ≤ 2 ℃ |
| Reproducibility | ≤ 4 ℃ |
| Accuracy | 0.005 |
| Precision | |
| Gas Flame | |
| Heating power | |
| Dimension | |
| Total Power Consumption | 300 W |
| Power supply | AC 220 V ± 10 %, 50 Hz |
| Net Weight |
It is used to determine the flash point of diesel and other fuel types in petrochemical analysis, flavors in food testing, paints in materials testing, and waste removal for environmental analysis
| Ambient temperature | 10 °C ~ 40 °C |
| Relative humidity | ≤ 80 % |
| Measurement Range | Ambient Temperature ~ 250 °C |
| Flash Point | Lower than 104 °C , error is 2 °C; Higher than 104 °C , error is 6 °C |
| Ambient temperature | ≤ 35 °C |
| Relative humidity | ≤ 85 % |
| Temperature range | 5 °C ~ 110 °C, Each scale division is 0.5 °C; 20 °C ~ 150 °C, Each scale division is 1.0 °C; 90 °C ~ 370 °C, Each scale division is 2 °C |
| Aperture of ignition device | 0.8 mm |
| Vessel Volume | 4000 ml × 2 |
| Power of Vacuum pump | 160 W |
| Negative power | 3.7 kPa（27.75 mmHg） |
| Power of shaking machine | 30 W |
| Graduated Flask | 200 ± 0.2 ml |
| Standard Water Value | 51 ± 1 s |
| Temperature Range | 0 ~ 100 °C |
| Temperature Controlling Accuracy | ± 0.2 °C |
| Graduated Flask | 100 ml |
| Standard Water Value | 51 ± 1 s |
| Temperature Range | 0 ~ 100 °C |
| Temperature Controlling Accuracy | ± 0.1 °C |
| Graduated Flask | 200 ± 0.2 ml (50 ± 0.2 ml for bituminous materials) |
| Standard Water Value | 51 ± 1 s |
| Temperature Range | 0 ~ 100 °C |
| Ambient Temperature | 10 °C ~ 40 °C |
| Calorimeter type | Isoperibol |
| Temperature range | 5 to 40°C |
| Measurement range | 5 to 40 MJ/ kg |
| Operation Mode | The outer barrel temperature is constant |
| Calorimeter type | Isoperibol |
| Temperature range | 5 to 40°C |
| Measurement range | 5 to 40 MJ/ kg |
| Operation Mode | A. Outer barrel temperature follows room temperature change mode Or B. Outer barrel temperature constant mode |
| Calorimeter type | Isoperibol |
| Oxygen filling | Fully automatic oxygen filling & releasing, fully automatic bomb raising & lowering |
| Bomb volume | 250 ml |
| Analysis time | < 8 min full test process: <10 min |
| Cubage of bath | Ф300 × 380 mm |
| Temperature controlling range | 0 °C ~ 100 °C |
| Temperature controlling accuracy | ± 0.2 °C |
| Temperature sensor | Industrial platinum resistance, Pt100 |
| Graduated flask | 100 ml，50 ml |
| Conical flask | 100ml |
| Separatory funnel | 250ml |
| Ambient temperature | (-10 )°C to 35 °C |
| Ambient temperature | ≤ 35 °C |
| Relative humidity | ≤ 85 % |
| Precision of titration tube | Scale division is 0.02 ml |
| Total power consumption | ≤ 1200 W |
| Measurement range | ≥0.05 mg KOH/g |
| Potential measurement range | 0 to 1800.0 mV |
| Burette volume | 10 mL |
| Minimum titration volume | 0.001 ml |