Benchtop Ion meter for I, LBIM-A26

Name: Benchtop Ion meter for I, LBIM-A26
Brand: Labtron.org
SKU: LBIM-A26
Rating: 4.9 (631 reviews)

Benchtop Ion meter for I, LBIM-A26 comes with (I) iodide ion selective electrode for iodide ion concentration measurement. This Ion meter comes with ± 1 % F.S. measurement accuracy. Its direct ion concentration readout helps in elaborate measurement process. The system menu allows setting the 8 parameters like calibration points, stability condition etc. It can measure concentration in ppm, mg / L, mol / L. The mV measurement is used to check the performance of ion selective electrode.

Name

Product

Message

Captcha

Ion measurement range	I range: 1×10<sup>8</sup>- 1M, 0.06 -127000 ppm
Ion measurement accuracy	± 1 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points
Calibration solutions	0.001, 0.01, 0.1, 1, 10, 100, 1000, 10000 ppm, mol / L, mg / L
mV range	(-1999.9) to 1999.9 mV
mV accuracy	± 0.2 mV
mV resolution	0.1 mV
Temperature measurement range	0 to 105 °C, 32 to 221 °F
Temperature accuracy	± 0.5 °C, ± 0.9 °F
Temperature resolution	0.1°C
Temperature compensation	0 to 100 °C, 32 to 212 °F
Compensation mode	Manual or automatic
Data hold function	Manual or automatic endpoint detection
Reset function	Yes
Stability condition	Low or high
Calibration due	0 to 31 days
Power off	Manual or automatic (10,20,30 minutes)
Memory	Stores up to 500 sets of data
Output	USB communication interface
Connector	BNC
Display	LCD (130 × 110 mm)
Power	DC 5 V, using AC adapter, AC 220 V / 50 Hz
Dimension (L × W × H)	210 × 188 × 60 mm
Weight	1.5 kg

Large LCD display
2 - 5 points calibration from low to high concentration
Direct ion concentration readout for elaborate measurement process
Selectable concentration units from ppm, mg / L, mol / L
mV measurements to check the performance of ion selective electrode
Temperature compensation provides accurate reading over the entire range
Stability indicator to show current measurement status
Calibration due reminder for regular calibration of the meter
Auto hold function to freeze stable reading for better viewing & recording
Automatic electrode diagnosis shows the slope of the sensor
Reset setting function
Expanded memory stores and recalls up to 500 readings
Built –in real time clock stamps
USB communication interface to transfer stored data to PC

Ion selective electrode: I range: 1×10⁸- 1M, 0.06 -127000 ppm
Ion standard solutions: 480 mL / bottle
Ionic strength adjuster: 480 mL / bottle
Temperature probe with sensor

Benchtop Ion meter is used to measure the iodide ion concentration present in potable water, D/W water, waste water and natural water resources using different ion concentration electrodes.

Benchtop Ion meter for I, LBIM-A26

Related Products of Benchtop Ion Meter

Labtron benchtop meters are easy to use. The LCD display, manual or automatic mode of calibration, universal connector and other features are included in this range to produce accurate, reliable results. It consist of benchtop meter for measuring pH, conductivity, dissolved oxygen content, Ion concentration, water hardness level. These meters are suitable for simple to complex applications in water quality testing, research and analysis etc.

Benchtop Ion meter for Cd, LBIM-A28

Ion measurement range	Cd range: 1×10<sup>6</sup>– 1M, 0.01-11200 ppm
Ion measurement accuracy	± 1 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points

Benchtop Ion meter for F, LBIM-A11

Ion measurement range	F range: 1 × 10<sup>6</sup>M – saturation, 0.02 ppm to saturation
Ion measurement accuracy	± 0.5 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points

Benchtop Ion meter for NH<sub>3</sub> , LBIM-A20

Ion measurement range	NH<sub>3</sub> range: 1 × 10<sup>6</sup> - 1 M, 0.02 - 17000 ppm
Ion measurement accuracy	± 1 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points

Benchtop Ion meter for Ca, LBIM-A13

Ion measurement range	Ca range: 5 × 10<sup>7</sup> - 1 M, 0.02 - 4000 ppm
Ion measurement accuracy	± 0.5 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points

Benchtop Ion meter for NH<sub>4</sub>, LBIM-A15

Ion measurement range	NH<sub>4</sub> range: 5 × 10<sup>6</sup> – 1 M, 0.1 – 18000 ppm
Ion measurement accuracy	± 0.5 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points

Benchtop Ion meter for Ag, LBIM-A22

Ion measurement range	Ag range: 1 × 10<sup>7</sup> - 1 M, 0.01 - 107900 ppm
Ion measurement accuracy	± 1 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points

Benchtop Ion meter for Cu, LBIM-A27

Ion measurement range	Cu range: 1×10<sup>8</sup> - 1M, 0.06-6400 ppm
Ion measurement accuracy	± 1 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points

Benchtop Ion meter for S, LBIM-A24

Ion measurement range	S range: 1×10<sup>7</sup> - 1M, 0.003-32100 ppm
Ion measurement accuracy	± 1 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points

Benchtop Ion meter for K, LBIM-A23

Ion measurement range	K range: 1×10<sup>6</sup> - 1M, 0.04 -39000 ppm
Ion measurement accuracy	± 1 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points

Benchtop Ion meter for Cn, LBIM-A21

Ion measurement range	Cn range: 5 × 10<sup>6</sup> – 0.01 M, 0.2 – 260 ppm
Ion measurement accuracy	± 1 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points

Benchtop Ion meter for Cl, LBIM-A10

Ion measurement range	Cl range: 5 × 10<sup>6</sup> - 1 M, 1.8 - 35500 ppm
Ion measurement accuracy	± 0.5 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points

Benchtop Ion meter for Br, LBIM-A14

Ion measurement range	Br range: 5 × 10<sup>6</sup> - 1 M, 0.4 - 79900 ppm
Ion measurement accuracy	± 0.5 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points

Benchtop Ion meter for Na, LBIM-A12

Ion measurement range	Na range: 1 × 10<sup>5</sup> - 1 M, 0.1 - 23000 ppm
Ion measurement accuracy	± 0.5 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points

Benchtop Ion meter for Pb, LBIM-A25

Ion measurement range	Pb range: 1×10<sup>8</sup> – 0.1M, 0.2-20700 ppm
Ion measurement accuracy	± 1 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points

BOD Meter

BOD Meter LBOD-A10

Determination range

0 to 35 mg/L, 0 to 70 mg/ L, 0 to 350 mg/L, 0 to 700 mg/L (without dilution)

0 to 4000 mg/ L (need to dilute) (subsection measurement)

Measurement error

Less or less than 10 %

Sample container/ bottle quantity

1 to 6

Sample container/ bottle Capacity

1000 ml

pH Meters (Portable)

Labtron portable meters are used in quality analysis of water and other solutions. With portability, waterproof features, finds applications in indoor as well as outdoor measurement of pH, ORP, dissolved oxygen, water hardness, salinity, TDS etc.

Portable pH/ORP meter LPRPM-A11

pH range	(-2.00) to 20.00 pH
pH accuracy	± 0.002 pH
pH resolution	0.1, 0.01, 0.001 pH
Calibration points	1 - 5 points

Portable pH meter LPRPM-A10

pH range	(-2.00) to 16.00 pH
pH accuracy	± 0.01 pH
pH resolution	0.01 pH
Calibration points	2 points

Benchtop Multi-parameter Water Quality Meter

Benchtop Multi-parameter Water Quality Meter LMPWM-A31

pH Mode

pH range	-2.00 to 20.00 pH
pH Accuracy	± 0.002 pH
pH Resolution	0.1/0.01/0.001 pH, selectable
pH Calibration Points	1 to 5 Points
pH Buffer Solutions	USA (pH 4.0/7.00/10.01) or NIST (pH 4.01/6.86/9.18) or DIN buffers

mV Mode

mV Range	-1999.9 to 1999.9 mV
mV Accuracy	± 0.2 mV
mV Resolution	0.1/1 mV, selectable
mV Calibration Points	1 Point

Conductivity Mode

Conductivity Range	0.01 to 20.00, 200.0, 2000 µS/cm, 20.00, 200.0 mS/cm
Conductivity Accuracy	± 0.5% F.S.
Conductivity Resolution	0.01/0.1/1
Conductivity Calibration Points	1 to 5 Points
Conductivity Solutions	10, 84, 1413 µS/cm, 12.88, 111.8 mS/ cm
Conductivity Temperature coefficient	0.0 to 10.0 %/°C
Compensation mode	Linear or Pure Water
Cell Constant	K=0.1, 1, 10 or Custom
Reference temperature	20 or 25°C

TDS Mode

TDS Range	0 to 10.00, 100.0, 1000 ppm, 10.00, 100 ppt (Max. 200 ppt)
TDS Accuracy	± 1 % F.S.
TDS Factor	0.1 to 1.0 (default 0.5)

Benchtop Multi-parameter Water Quality Meter LMPWM-A30

pH Mode

pH range	-2.00 to 20.00 pH
pH Accuracy	± 0.002 pH
pH Resolution	0.1/0.01/0.001 pH, selectable
pH Calibration Points	1 to 5 Points
pH Buffer Solutions	USA (pH 4.0/7.00/10.01) or NIST (pH 4.01/6.86/9.18) or DIN buffers

mV Mode

mV Range	-1999.9 to 1999.9 mV
mV Accuracy	± 0.2 mV
mV Resolution	0.1/1 mV, selectable
mV Calibration Points	1 Point

Conductivity Mode

Conductivity Range	0.01 to 20.00, 200.0, 2000 µS/cm, 20.00, 200.0 mS/cm
Conductivity Accuracy	± 0.5% F.S.
Conductivity Resolution	0.01/0.1/1
Conductivity Calibration Points	1 to 5 Points
Conductivity Solutions	10, 84, 1413 µS/cm, 12.88, 111.8 mS/ cm
Conductivity Temperature coefficient	0.0 to 10.0 %/°C
Compensation mode	Linear or Pure Water
Cell Constant	K=0.1, 1, 10 or Custom
Reference temperature	20 or 25°C

TDS Mode

TDS Range	0 to 10.00, 100.0, 1000 ppm, 10.00, 100 ppt (Max. 200 ppt)
TDS Accuracy	± 1 % F.S.
TDS Factor	0.1 to 1.0 (default 0.5)

Benchtop Multi-parameter Water Quality Meter LMPWM-A32

pH Mode

pH range	-2.00 to 20.00 pH
pH Accuracy	± 0.002 pH
pH Resolution	0.1/0.01/0.001 pH, selectable
pH Calibration Points	1 to 5 Points
pH Buffer Solutions	USA (pH 4.0/7.00/10.01) or NIST (pH 4.01/6.86/9.18) or DIN buffers

mV Mode

mV Range	-1999.9 to 1999.9 mV
mV Accuracy	± 0.2 mV
mV Resolution	0.1/1 mV, selectable
mV Calibration Points	1 Point

Conductivity Mode

Conductivity Range	0.01 to 20.00, 200.0, 2000 µS/cm, 20.00, 200.0 mS/cm
Conductivity Accuracy	± 0.5% F.S.
Conductivity Resolution	0.01/0.1/1
Conductivity Calibration Points	1 to 5 Points
Conductivity Solutions	10, 84, 1413 µS/cm, 12.88, 111.8 mS/ cm
Conductivity Temperature coefficient	0.0 to 10.0 %/°C
Compensation mode	Linear or Pure Water
Cell Constant	K=0.1, 1, 10 or Custom
Reference temperature	20 or 25°C

Dissolved Oxygen Mode

Dissolved Oxygen Range	0.00 to 20.00 mg/ L
Dissolved Oxygen Accuracy	± 0.2 mg/ L
Dissolved Oxygen Resolution	0.1/ 0.01 mg/ L, selectable
Dissolved Oxygen Calibration Points	1 or 2 Points
% Saturation Range	0.0 to 200.0 % with ± 2 % accuracy
Pressure correction	60 to 112.5 kPa, 450 to 850 mmHg
Salinity correction	0 to 50 g/ L

Portable Multi Parameter Water Quality Meter

Portable Multi-parameter Water Quality Meter LMPWM-A10

pH mode

pH measurement range	(-2.000) to 20.000 pH
pH accuracy	± 0.002 pH
pH calibration points	1 - 5 points
pH calibration solutions	USA, NIST, DIN or user defined

ORP measurement

ORP measurement range	-1999.9 to 1999.9 mV
ORP accuracy	±0.2 mV
ORP calibration points	1 point
ORP calibration solutions	mV & relative mV

Ion measurement

Ion measurement range	0 to 19999 ppm, mg/L, mol/L
Ion accuracy	± 0.5 % F.S. (monovalent), ± 1 % F.S. (divalent)
Ion calibration points	2 - 5 points
Ion calibration solutions	0.001, 0.01, 0.1, 1, 10, 100, 1000, 10000 ppm, mol/L, mg/L

Conductivity measurement

Conductivity measurement range	0 - 20.00, 200.0, 2000 µS / cm, 20.00, 200.2 mS / cm
Conductivity accuracy	± 0.5 % F.S.
Conductivity calibration points	1 - 5 points
Conductivity calibration solutions	10 µS / cm, 84 µS / cm, 1413 µS / cm, 12.88mS / cm, 111.8mS / cm
Temperature coefficient	0.0 to 10.0 % / °C
Compensation modes	Linear or pre water
Cell constant	K = 0.1, 1, 10 or user-defined
Normalization temperature	20 °C or 25 °C

Portable Multi-parameter Water Quality Meter LMPWM-A20

pH mode

pH measurement range	(-2.000) to 20.000 pH
pH accuracy	± 0.002 pH
pH calibration points	1 - 5 points
pH calibration solutions	USA, NIST, DIN or user defined

ORP measurement

ORP measurement range	-1999.9 to 1999.9 mV
ORP accuracy	±0.2 mV
ORP calibration points	1 point
ORP calibration solutions	mV & relative mV

Conductivity measurement

Conductivity measurement range	0 - 20.00, 200.0, 2000 µS / cm, 20.00, 200.2 mS / cm
Conductivity accuracy	± 0.5 % F.S.
Conductivity calibration points	1 - 5 points
Conductivity calibration solutions	10 µS / cm, 84 µS / cm, 1413 µS / cm, 12.88mS / cm, 111.8mS / cm
Temperature coefficient	0.0 to 10.0 % / °C
Compensation modes	Linear or pre water
Cell constant	K = 0.1, 1, 10 or user-defined
Normalization temperature	20 °C or 25 °C

TDS measurement

TDS range	0-100 ppt. (max. 200 ppt., depending on factor setting)
TDS accuracy	± 1 % F.S.
TDS factor	0.1 - 1.0 (default 0.5)

Portable Multi-parameter Water Quality Meter LMPWM-A11

pH mode

pH measurement range	(-2.000) to 20.000 pH
pH accuracy	± 0.002 pH
pH calibration points	1 - 5 points
pH calibration solutions	USA, NIST, DIN or user defined

ORP measurement

ORP measurement range	-1999.9 to 1999.9 mV
ORP accuracy	±0.2 mV
ORP calibration points	1 point
ORP calibration solutions	mV & relative mV

Ion measurement

Ion measurement range
Ion accuracy
Ion calibration points
Ion calibration solutions

Conductivity measurement

Conductivity measurement range	0 - 20.00, 200.0, 2000 µS / cm, 20.00, 200.2 mS / cm
Conductivity accuracy	± 0.5 % F.S.
Conductivity calibration points	1 - 5 points
Conductivity calibration solutions	10 µS / cm, 84 µS / cm, 1413 µS / cm, 12.88mS / cm, 111.8mS / cm
Temperature coefficient	0.0 to 10.0 % / °C
Compensation modes	Linear or pre water
Cell constant	K = 0.1, 1, 10 or user-defined
Normalization temperature	20 °C or 25 °C

Online Dissolved Oxygen Controller

Online Dissolved Oxygen Controller LODC-A10

Dissolved oxygen range	0.0 to 20.0 mg / L (or ppm)
Dissolved oxygen Calibration points	1 - 2 points
Dissolved oxygen accuracy	± 0.5 mg / L
Dissolved oxygen resolution	0.1 mg / L