Multi purpose Pocket pH tester LPPT-B10

Name: Multi purpose Pocket pH tester LPPT-B10
Brand: Labtron.org
SKU: LPPT-B10
Rating: 4.8 (945 reviews)

The multipurpose pocket pH tester LPPM-B10 comes with BNC connector, it can be connected to different pH electrode for different applications. With (-1.00) to 15.00 pH measurement range, 1 - 3 points calibration system and manual temperature compensation mode, this multi-purpose pocket pH tester can measure pH , temperature over wide range with accuracy. Its built–in system menu can customize five functional parameters as per requirement.

Name

Product

Message

Captcha

pH measurement range	pH range: (-1.00) to 15.00 pH
Shape of electrode	Different electrodes can be connceted via BNC Connector
pH measurement accuracy	± 0.01 pH
Calibration point	1 - 3 points
Calibration solution	USA (pH 4.0/7.00/10.01)
Operating temperature
Temperature accuracy
Temperature compensation range	0 °C to 100 °C , Manual
Data hold function	Manual or Automatic
Connector	BNC
Shutdown mode
Dimension (length × diameter)	175 × 40 mm
Weight	100 g
Power type	2 × 1.5 V AAA batteries
Battery life	About 200 hours

1 - 3 point calibration , automatic identification of calibration buffers
Manual mode for temperature compensation ensures high precision measurement results
Auto hold function freezes stable, final readings for better viewing and recording
Automatic power off to reduce battery power consumption
Reset function automatically resumes all the setting back to factory default options
Alarm icon to indicate low battery
Built-in system menu, customizable
Reset function to restore settings to default mode
Waterproof performance to maintain integrity of the instrument

pH electrodes to measure pH of liquids and semi-solids , solvents
pH standard buffer USA (pH 4.01/7.00/10.01), NIST (pH 4.01/6.86/9.18)

The multipurpose pocket pH tester can be used in water and waste water analysis, aquaculture & environmental monitoring, food & beverage industry & other indusries.

Multi purpose Pocket pH tester LPPT-B10

Related Products of pH Tester

Labtron pocket testers are small and compact in size, gives fast and accurate results. The Pocket testers consist of pH, ORP, TDS, dissolved oxygen, salinity and conductivity tester for various laboratory as well as outdoor applications. Measurements can be taken by inserting the probe in to the test solution and after gentle stirring, stable readings can be noted down.

Pocket pH tester LPPT-A32

pH measurement range	pH range: (-1.00) to 15.00 pH
Shape of electrode	Long distance planar pH electrode
pH measurement accuracy	± 0.01 pH
Calibration point	1 - 3 points

Pocket pH tester LPPT-A12

pH measurement range	0.0 - 14.00 pH
Shape of electrode	Long distance planar pH electrode
pH measurement accuracy	± 0.1 pH
Calibration point	2 points

Pocket pH tester LPPT-A30

pH measurement range	pH range: (-1.00) to 15.00 pH
Shape of electrode	Round glass pH electrode
pH measurement accuracy	± 0.01 pH
Calibration point	1 - 3 points

Pocket pH tester LPPT-A22

pH measurement range	pH range: (-1.00) to 15.00 pH
Shape of electrode	Long distance planar pH electrode
pH measurement accuracy	± 0.01 pH
Calibration point	1 - 3 points

Pocket pH tester LPPT-A31

pH measurement range	pH range: (-1.00) to 15.00 pH
Shape of electrode	Flat pH electrode
pH measurement accuracy	± 0.01 pH
Calibration point	1 - 3 points

Pocket pH tester LPPT-A10

pH measurement range	0.0 - 14.00 pH
Shape of electrode	Round glass pH electrode
pH measurement accuracy	± 0.1 pH
Calibration point	2 points

Pocket pH tester LPPT-A11

pH measurement range	0.0 - 14.00 pH
Shape of electrode	Flat pH electrode
pH measurement accuracy	± 0.1 pH
Calibration point	2 points

Pocket pH tester LPPT-A21

pH measurement range	pH range: (-1.00) to 15.00 pH
Shape of electrode	Flat pH electrode
pH measurement accuracy	± 0.01 pH
Calibration point	1 - 3 points

Pocket pH tester LPPT-A20

pH measurement range	pH range: (-1.00) to 15.00 pH
Shape of electrode	Round glass pH electrode
pH measurement accuracy	± 0.01 pH
Calibration point	1 - 3 points

Online Conductivity Controller

Online Conductivity Controller LOCC-A10

Conductivity measurement range	0.01 to 20.00, 200.0, 2000 µS/ cm, 20.00, 200.0 mS/ cm
Conductivity calibration points	1 to 3 points
Conductivity accuracy	±1 % F.S.
Conductivity resolution	0.001/ 0.01/ 0.1/ 1

Dissolved Oxygen Tester

Pocket Dissolved oxygen tester LPKDO-A10

Dissolved oxygen range	0.0 to 20.0 mg/L (or ppm)
Dissolved oxygen accuracy	± 0.5 mg/L
% of saturation of oxygen	0.0 to 200.0%
Sensor type	Polarographic dissolved oxygen probe

Multi Parameter Water Quality Analyzer

Multi parameter water quality analyzer LMWA-A10

COD

COD determination range	2 to 10000 mg/ L
COD measurement accuracy	COD < 50 mg/ L, ≤ ± 10 % and COD > 50 mg/ L, ≤ ± 5 %
COD minimum detection limit	0.1 mg/ L
COD measurement time	20 minutes
COD repeatability	≤ ± 5 %
Processing sample number per batch
Consumables for colorimetric COD measurement	Colorimetric tubes and Cuvette
COD reactor digestion temperature	165 ± 0.5°C
COD reactor digestion time	10 min
COD reactor time setting switches	3 pcs
Anti-chlorine interference	(Cl) < 1000 mg/ L No effect

Ammonia nitrogen

Ammonia nitrogen determination range	0.02 to 60 mg/ L
Ammonia nitrogen measurement accuracy	≤ ± 10 %
Ammonia nitrogen minimum detection limit	0.01 mg/ L
Ammonia nitrogen measurement time	10 to 15 minutes
Ammonia nitrogen repeatability	≤ ± 5 %
Processing sample number per batch
Consumables for colorimetric ammonia nitrogen measurement	Colorimetric tubes and Cuvette
Ammonia nitrogen reactor time setting switches	3 pcs

Total phosphorous

Total phosphorous determination range	0.002 to 20 mg/ L
Total phosphorous total phosphorous measurement accuracy	≤ ± 5 %
Total phosphorous minimum detection limit	0.001 mg/ L
Total phosphorous measurement time	35 to 50 minutes
Total phosphorous repeatability	≤ ± 5 %
Processing sample number per batch
Consumables for colorimetric total phosphorous measurement	Colorimetric tubes and Cuvette
Total phosphorous reactor digestion temperature	120 ± 0.5°C
Total phosphorous reactor digestion time	30 min
Total phosphorous reactor time setting switches	3 pcs

Turbidity

Turbidity determination range	0.5 to 400 NTU
Turbidity measurement accuracy	≤ ± 5 %
Turbidity minimum detection limit	0.1 NTU
Turbidity measurement time	1 minute
Turbidity repeatability	≤ ± 5 %
Consumables for colorimetric turbidity measurement	Colorimetric Cuvette

Multi parameter water quality analyzer LMWA-A11

COD

COD determination range	5 to 5000 mg/ L
COD measurement accuracy	COD < 50 mg/ L, ≤ ± 10 % and COD > 50 mg/ L, ≤ ± 5 %
COD minimum detection limit	0.1 mg/ L
COD measurement time	20 minutes
COD repeatability	≤ ± 5 %
Processing sample number per batch	12 pcs
Consumables for colorimetric COD measurement	Colorimetric tubes and Cuvette
COD reactor digestion temperature	165 ± 0.5°C
COD reactor digestion time	10 min
COD reactor time setting switches	3 pcs
Anti-chlorine interference	(Cl) < 1000 mg/ L No effect

Ammonia nitrogen

Ammonia nitrogen determination range	0.02 to 30 mg/ L
Ammonia nitrogen measurement accuracy	≤ ± 10 %
Ammonia nitrogen minimum detection limit	0.01 mg/ L
Ammonia nitrogen measurement time	10 to 15 minutes
Ammonia nitrogen repeatability	≤ ± 5 %
Processing sample number per batch	20 pcs
Consumables for colorimetric ammonia nitrogen measurement	Colorimetric tubes and Cuvette
Ammonia nitrogen reactor time setting switches	3 pcs

Total phosphorous

Total phosphorous determination range	0.002 to 10 mg/ L
Total phosphorous total phosphorous measurement accuracy	≤ ± 5 %
Total phosphorous minimum detection limit	0.001 mg/ L
Total phosphorous measurement time	35 to 50 minutes
Total phosphorous repeatability	≤ ± 5 %
Processing sample number per batch	12 pcs
Consumables for colorimetric total phosphorous measurement	Colorimetric tubes and Cuvette
Total phosphorous reactor digestion temperature	120 ± 0.5°C
Total phosphorous reactor digestion time	30 min
Total phosphorous reactor time setting switches	3 pcs

Turbidity

Turbidity determination range	0.5 to 400 NTU
Turbidity measurement accuracy	≤ ± 5 %
Turbidity minimum detection limit	0.1 NTU
Turbidity measurement time	1 minute
Turbidity repeatability	≤ ± 5 %
Consumables for colorimetric turbidity measurement	Colorimetric Cuvette

Benchtop Ion Meter

Labtron benchtop meters are easy to use. The LCD display, manual or automatic mode of calibration, universal connector and other features are included in this range to produce accurate, reliable results. It consist of benchtop meter for measuring pH, conductivity, dissolved oxygen content, Ion concentration, water hardness level. These meters are suitable for simple to complex applications in water quality testing, research and analysis etc.

Benchtop Ion meter for Na, LBIM-A12

Ion measurement range	Na range: 1 × 10<sup>5</sup> - 1 M, 0.1 - 23000 ppm
Ion measurement accuracy	± 0.5 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points

Benchtop Ion meter for F, LBIM-A11

Ion measurement range	F range: 1 × 10<sup>6</sup>M – saturation, 0.02 ppm to saturation
Ion measurement accuracy	± 0.5 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points

Benchtop Ion meter for Cl, LBIM-A10

Ion measurement range	Cl range: 5 × 10<sup>6</sup> - 1 M, 1.8 - 35500 ppm
Ion measurement accuracy	± 0.5 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points

Portable Conductivity Meter

Portable Conductivity Meter LPCM-A12

Conductivity

Conductivity measurement range	0.01 to 20.00, 200.0, 2000 µS/cm, 20.00, 200 mS/cm
Conductivity accuracy	±0.5% F.S
Conductivity calibration points	1 to 5 points
Conductivity calibration solutions	10 µS/cm, 84 µS/cm, 1413 µS/cm, 12.88 mS/cm, 111.8 mS/cm or Custom
Conductivity resolution	0.001, 0.01, 0.1, 1

Salinity

Salinity range	0.00 to 80.00 ppt, 0.00 to 42.00 psu
Salinity accuracy	±1% F.S
Salinity measurement modes	Practical Salinity (psu) or Natural Seawater (ppt)
Salinity resolution	0.01, 0.1, 1

Temperature

Temperature measuring range	0 105 °C, 32 to 221 °F
Temperature measuring accuracy	± °0.5 C, ± 0.9 °F
Temperature calibration points	1 point
Temperature resolution	0.1 °C, 0.1 °F

Temperature compensation

0 to 100 °C, 32 to 212 ° F, Manual or Automatic

Portable Conductivity Meter LPCM-A11

Conductivity

Conductivity measurement range	0.01 to 20.00, 200.0, 2000 µS/cm, 20.00, 200 mS/cm
Conductivity accuracy	±0.5% F.S
Conductivity calibration points	1 to 5 points
Conductivity calibration solutions	10 µS/cm, 84 µS/cm, 1413 µS/cm, 12.88 mS/cm, 111.8 mS/cm or Custom
Conductivity resolution	0.001, 0.01, 0.1, 1

TDS

TDS range	0 10.00, 100.0, 1000 ppm, 10.00, 100 ppt (Max. 200 ppt)
TDS accuracy	±1 % F.S
TDS factor	0.01 to 1.00 (Default 0.5)
TDS resolution	0.01, 0.1, 1

Temperature

Temperature measuring range	0 105 °C, 32 to 221 °F
Temperature measuring accuracy	± °0.5 C, ± 0.9 °F
Temperature calibration points	1 point
Temperature resolution	0.1 °C, 0.1 °F

Temperature compensation

0 to 100 °C, 32 to 212 ° F, Manual or Automatic

Portable Conductivity Meter LPCM-A10

Conductivity

Conductivity measurement range	0.01 to 20.00, 200.0, 2000 µS/cm, 20.00, 200 mS/cm
Conductivity accuracy	±0.5% F.S
Conductivity calibration points	1 to 3 points
Conductivity calibration solutions	10 µS/cm, 84 µS/cm, 1413 µS/cm, 12.88 mS/cm, 111.8 mS/cm or Custom
Conductivity resolution	0.001, 0.01, 0.1, 1

Temperature

Temperature measuring range	0 105 °C, 32 to 221 °F
Temperature measuring accuracy	± °0.5 C, ± 0.9 °F
Temperature calibration points	1 point
Temperature resolution	0.1 °C, 0.1 °F

Temperature compensation

0 to 100 °C, 32 to 212 ° F, Manual or Automatic

Temperature coefficient

Linear