Pocket Salinity tester LPST-A10 comes with 1 - 3 point calibration system. Equipped with platinum sensor, it provides fast and reliable results. The System menu allows setting of up to 5 parameters. It measures salinity of water and other low and high salt concentrated solutions. Equipped with replaceable electrode helps to reduce the maintenance cost.
| Salinity measurement range | 0.00 to 10.00 ppt |
|---|---|
| Salinity accuracy | ± 1 % F.S |
| Conductivity range | 0 - 20.00, 200.0, 2000 µS/cm, 20.00 mS/cm |
| Calibration solutions | 84 µS/cm, 1413 µS/cm, 12.88 mS/cm |
| Conductivity accuracy | ± 1 % F.S |
| Calibration points | 1 - 3 points |
| Temperature compensation range | 0 °C to 60 °C, 32 °F to 140 °F |
| Temperature accuracy | ± 1 °C |
| Temperature coefficient | 2 % per °C |
| Normalization temperature | 25 °C |
| Reset function | Yes |
| Cell constant | K=1 |
| Data hold function | Manual or automatic endpoint detection |
| Power off | Manual or automatic (8 minute after last key is pressed) |
| Sensor type | Platinum sensor |
| Battery life | Approximately 200 hours |
| Power | 2 × 1.5 V AAA batteries |
| Dimension (L × Dia.) | 185 × 40 mm |
| Weight | 100 g |
Pocket salinity tester measures salinity i.e. dissolved salt from pure water, brine water, aquarium water, food & beverage processing units & other industrial applications.
Labtron pocket testers are small and compact in size, gives fast and accurate results. The Pocket testers consist of pH, ORP, TDS, dissolved oxygen, salinity and conductivity tester for various laboratory as well as outdoor applications. Measurements can be taken by inserting the probe in to the test solution and after gentle stirring, stable readings can be noted down.
| Salinity measurement range | 0.00 to 80.00 ppt |
| Salinity accuracy | ± 1 % F.S |
| Conductivity range | 0 - 200.0 µS/cm, 100 - 2000 µS/cm, 20.00 mS/cm |
| Calibration solutions | 1413 µS/cm, 12.88 mS/cm, 111.8 mS/cm |
| pH measurement range | 01.00 to 15.00 pH |
| pH calibration points | 1 to 3 points |
| pH Buffer Solutions | USA (pH 4.01, 7.00, 10.01) or NIST (pH 4.01, 6.86, 9.18) |
| pH accuracy | ± 0.01 pH |
Labtron benchtop meters are easy to use. The LCD display, manual or automatic mode of calibration, universal connector and other features are included in this range to produce accurate, reliable results. It consist of benchtop meter for measuring pH, conductivity, dissolved oxygen content, Ion concentration, water hardness level. These meters are suitable for simple to complex applications in water quality testing, research and analysis etc.
| Dissolved oxygen range | 0.0 to 20.0 mg / L (or ppm) |
| Dissolved oxygen accuracy | ± 0.2 mg / L |
| Resolution | 0.01 mg / L |
| Calibration points | 1 - 2 points |
| Dissolved oxygen range | 0.0 to 20.0 mg / L (or ppm) |
| Dissolved oxygen accuracy | ± 0.5 mg / L |
| Resolution | 0.1 mg / L |
| Calibration points | 1 - 2 points |
| Dissolved oxygen range | 0.0 to 20.0 mg / L (or ppm) |
| Dissolved oxygen Calibration points | 1 - 2 points |
| Dissolved oxygen accuracy | ± 0.5 mg / L |
| Dissolved oxygen resolution | 0.1 mg / L |
Labtron pocket testers are small and compact in size, gives fast and accurate results. The Pocket testers consist of pH, ORP, TDS, dissolved oxygen, salinity and conductivity tester for various laboratory as well as outdoor applications. Measurements can be taken by inserting the probe in to the test solution and after gentle stirring, stable readings can be noted down.
| Salinity measurement range | 0.00 to 80.00 ppt |
| Salinity accuracy | ± 1 % F.S |
| Conductivity range | 0 - 200.0 µS/cm, 100 - 2000 µS/cm, 20.00 mS/cm |
| Calibration solutions | 1413 µS/cm, 12.88 mS/cm, 111.8 mS/cm |
| Salinity measurement range | 0.00 to 10.00 ppt |
| Salinity accuracy | ± 1 % F.S |
| Conductivity range | 0 - 20.00, 200.0, 2000 µS/cm, 20.00 mS/cm |
| Calibration solutions | 84 µS/cm, 1413 µS/cm, 12.88 mS/cm |
Labtron portable meters are used in quality analysis of water and other solutions. With portability, waterproof features, finds applications in indoor as well as outdoor measurement of pH, ORP, dissolved oxygen, water hardness, salinity, TDS etc.
| pH mode |
|
||||||||||||||||
| ORP measurement |
|
||||||||||||||||
| Ion measurement |
|
||||||||||||||||
| Conductivity measurement |
|
| pH mode |
|
||||||||||||||||
| ORP measurement |
|
||||||||||||||||
| Conductivity measurement |
|
||||||||||||||||
| TDS measurement |
|
| pH mode |
|
||||||||||||||||
| ORP measurement |
|
||||||||||||||||
| Ion measurement |
|
||||||||||||||||
| Conductivity measurement |
|