Bench top turbidity meter (with built-in printer) LTM-C14 comes with microprocessor controlled system, works on 90° scattered light principle to measure water turbidity in nephelometric turbidity unit i.e. NTU. The formazine standard solution of turbidity mentioned in ISO 7027 is used for turbidity analysis. This turbidity meter delivers highly accurate results with better numerical calculations to meet GLP standards.
| Measuring range (NTU) | 0 to 10, 0 to 100, 0 to 200, 0 to 500, 0 to 1000 |
|---|---|
| Minimum readout value (NTU) | 0.001 |
| Calibration point | 5 |
| Sample volume | 18 to 20 ml |
| Principle method | 90° scattered light |
| Operating temperature | Room Temperature |
| Working temperature | Room Temperature |
| Light source | Infrared-emitting diode (850 nm λ) |
| Detector | Silicon photodiode |
| Error value | (F.S) ±2%, ±3%,±5% |
| Zero drift | (F.S) ±0.5% (0.02 NTU) |
| Reset functions | No |
| Memory | Nil |
| Output | RS232 data communication interface |
| Dimension | 415 × 375 × 200 mm |
| Weight | 4 kg |
| Power batteries | DC 1.5 V, 5 AA alkaline batteries |
| Power supply | AC 220 V, 50 Hz |
Used in water treatment plants, swimming pool, water recycling units, research and quality testing laboratories of pharmacy, life science, food, and beverage industry.
| Measuring range (NTU) | 0 to 100 |
| Minimum readout value (NTU) | 0.01, 0.1 |
| Calibration point | 1 |
| Sample volume | 5 to 10 ml |
| Measuring range (NTU) | 0 to 100, 100 to 400 |
| Minimum readout value (NTU) | 0.01, 0.1 |
| Calibration point | 5 |
| Sample volume | 5 to 10 ml |
| Measuring range (NTU) | 0 to 10, 0 to 100 |
| Minimum readout value (NTU) | 0.001 |
| Calibration point | 2 |
| Sample volume | 18 to 20 ml |
| Measuring range (NTU) | 0 to 200 |
| Minimum readout value (NTU) | 0.1 |
| Calibration point | Nil |
| Sample volume | 5 to 10 ml |
| Measuring range (NTU) | 0 to 10, 0 to 100, 0 to 200, 0 to 500 |
| Minimum readout value (NTU) | 0.001 |
| Calibration point | 4 |
| Sample volume | 18 to 20 ml |
| Measuring range (NTU) | 0 to 50, 0 to 100, 0 to 200, 0 to 400, 0 to 800, 0 to 1000 |
| Minimum readout value (NTU) | 0.01, 0.1 |
| Calibration point | 6 |
| Sample volume | 5 to 10 ml |
| Measuring range (NTU) | 0 to 10, 0 to 100, 0 to 200, 0 to 500, 0 to 1000 |
| Minimum readout value (NTU) | 0.01 |
| Calibration point | 5 |
| Sample volume | 18 to 20 ml |
| Measuring range (NTU) | 0 to 100, 100 to 800 |
| Minimum readout value (NTU) | 0.01, 0.1 |
| Calibration point | 6 |
| Sample volume | 5 to 10 ml |
| Measuring range (NTU) | 0 to 50, 0 to 100, 0 to 200, 0 to 400, 0 to 800 |
| Minimum readout value (NTU) | 0.01, 0.1 |
| Calibration point | 5 |
| Sample volume | 5 to 10 ml |
| Measuring range (NTU) | 0 to 100, 100 to 1000 |
| Minimum readout value (NTU) | 0.01, 0.1 |
| Calibration point | 7 |
| Sample volume | 5 to 10 ml |
| Measuring range (NTU) | 0 to 50, 0 to 100, 0 to 200, 0 to 400 |
| Minimum readout value (NTU) | 0.01, 0.1 |
| Calibration point | 4 |
| Sample volume | 5 to 10 ml |
| Measuring range (NTU) | 0 to 100, 0 to 200, 0 to 500 |
| Minimum readout value (NTU) | 0.01 |
| Calibration point | 3 |
| Sample volume | 18 to 20 ml |
| Measuring range (NTU) | 0 to 100, 0 to 200 |
| Minimum readout value (NTU) | 0.01 |
| Calibration point | 2 |
| Sample volume | 18 to 20 ml |
| Measuring range (NTU) | 0 to 100, 0 to 200 |
| Minimum readout value (NTU) | 0.01, 0.1 |
| Calibration point | 4 |
| Sample volume | 5 to 10 ml |
| Light source | LED/860 nm (Wavelength) |
| Readings display | LCD |
| Unit switches | NTU, FTU, EBC, ASBC |
| Measurement range | 0.00-20.0; 20.01-200; 200.01-1000 NTU |
Labtron pocket testers are small and compact in size, gives fast and accurate results. The Pocket testers consist of pH, ORP, TDS, dissolved oxygen, salinity and conductivity tester for various laboratory as well as outdoor applications. Measurements can be taken by inserting the probe in to the test solution and after gentle stirring, stable readings can be noted down.
| TDS range | 5 - 1000 ppm |
| TDS accuracy | ± 1 % F.S. |
| TDS factor | 0.4 to 1.0 (default 0.5) |
| Calibration points | 1 point |
| TDS range | 0.05 - 10.00 ppt |
| TDS accuracy | ± 1 % F.S. |
| TDS factor | 0.4 to 1.0 (default 0.5) |
| Calibration points | 1 point |
| TDS range | 0.5 - 100.0 ppm |
| TDS accuracy | ± 1 % F.S. |
| TDS factor | 0.4 to 1.0 (default 0.5) |
| Calibration points | 1 point |
| Residual chlorine/total chlorine |
|
||||||||
| Chlorine dioxide |
|
||||||||
| Light source | LED | ||||||||
| Wavelength of light | 515 nm |
| Determination range |
|
||
| Measurement error | Less or less than 10 % | ||
| Sample container/ bottle quantity | 1 to 6 | ||
| Sample container/ bottle Capacity | 1000 ml |
Labtron benchtop meters are easy to use. The LCD display, manual or automatic mode of calibration, universal connector and other features are included in this range to produce accurate, reliable results. It consist of benchtop meter for measuring pH, conductivity, dissolved oxygen content, Ion concentration, water hardness level. These meters are suitable for simple to complex applications in water quality testing, research and analysis etc.
| Ion measurement range | F range: 1 × 10<sup>6</sup>M – saturation, 0.02 ppm to saturation |
| Ion measurement accuracy | ± 0.5 % F.S. |
| Resolution | 0.001, 0.01, 0.1, 1 |
| Calibration points | 2 to 5 points |
| Ion measurement range | Cl range: 5 × 10<sup>6</sup> - 1 M, 1.8 - 35500 ppm |
| Ion measurement accuracy | ± 0.5 % F.S. |
| Resolution | 0.001, 0.01, 0.1, 1 |
| Calibration points | 2 to 5 points |
| Ion measurement range | Na range: 1 × 10<sup>5</sup> - 1 M, 0.1 - 23000 ppm |
| Ion measurement accuracy | ± 0.5 % F.S. |
| Resolution | 0.001, 0.01, 0.1, 1 |
| Calibration points | 2 to 5 points |
Labtron benchtop meters are easy to use. The LCD display, manual or automatic mode of calibration, universal connector and other features are included in this range to produce accurate, reliable results. It consist of benchtop meter for measuring pH, conductivity, dissolved oxygen content, Ion concentration, water hardness level. These meters are suitable for simple to complex applications in water quality testing, research and analysis etc.
| Water hardness range | 0.05 mmol / L -0.2 mol / L <br/> (CaCO<sub>3</sub>) 0 - 19999 mg / L, (CaO) 0 - 11220 mg / L, (boiler) 0 - 400 mmol / L, (Ca) 0 - 8020 mg / L<br/> (German degree) 0 - 1122 °dH, (English degree) 0 - 1404 °e, (French degree) 0 - 2000 °f |
| Accuracy | ± 1 % F.S. |
| Calibration points | 2 to 5 points |
| Calibration solution | 0.001, 0.01, 0.1 mmol/L, 0.001, 0.01, 0.1 mol/L |