Labtron pocket testers are small and compact in size, gives fast and accurate results. The Pocket testers consist of pH, ORP, TDS, dissolved oxygen, salinity and conductivity tester for various laboratory as well as outdoor applications. Measurements can be taken by inserting the probe in to the test solution and after gentle stirring, stable readings can be noted down.
TDS range | 5 - 1000 ppm |
TDS accuracy | ± 1 % F.S. |
TDS factor | 0.4 to 1.0 (default 0.5) |
Calibration points | 1 point |
TDS range | 0.05 - 10.00 ppt |
TDS accuracy | ± 1 % F.S. |
TDS factor | 0.4 to 1.0 (default 0.5) |
Calibration points | 1 point |
TDS range | 0.5 - 100.0 ppm |
TDS accuracy | ± 1 % F.S. |
TDS factor | 0.4 to 1.0 (default 0.5) |
Calibration points | 1 point |
Labtron pocket testers are small and compact in size, gives fast and accurate results. The Pocket testers consist of pH, ORP, TDS, dissolved oxygen, salinity and conductivity tester for various laboratory as well as outdoor applications. Measurements can be taken by inserting the probe in to the test solution and after gentle stirring, stable readings can be noted down.
Dissolved oxygen range | 0.0 to 20.0 mg/L (or ppm) |
Dissolved oxygen accuracy | ± 0.5 mg/L |
% of saturation of oxygen | 0.0 to 200.0% |
Sensor type | Polarographic dissolved oxygen probe |
Measurement range | 20000 mg/L <br/> 0.01 mg/L ~ 45000 mg/L <br/> 0.01 mg/L ~ 120000 mg/L |
Measurement accuracy | ± 2 % F.S. of its range ( Depending on the homogeneity of sludge) |
Pressure range | ≤ 0.4 Mpa |
Flow rate | ≤ 2.5 m/s, 8.2 ft./s |
Labtron pocket testers are small and compact in size, gives fast and accurate results. The Pocket testers consist of pH, ORP, TDS, dissolved oxygen, salinity and conductivity tester for various laboratory as well as outdoor applications. Measurements can be taken by inserting the probe in to the test solution and after gentle stirring, stable readings can be noted down.
Salinity measurement range | 0.00 to 80.00 ppt |
Salinity accuracy | ± 1 % F.S |
Conductivity range | 0 - 200.0 µS/cm, 100 - 2000 µS/cm, 20.00 mS/cm |
Calibration solutions | 1413 µS/cm, 12.88 mS/cm, 111.8 mS/cm |
Salinity measurement range | 0.00 to 10.00 ppt |
Salinity accuracy | ± 1 % F.S |
Conductivity range | 0 - 20.00, 200.0, 2000 µS/cm, 20.00 mS/cm |
Calibration solutions | 84 µS/cm, 1413 µS/cm, 12.88 mS/cm |
Labtron pocket testers are small and compact in size, gives fast and accurate results. The Pocket testers consist of pH, ORP, TDS, dissolved oxygen, salinity and conductivity tester for various laboratory as well as outdoor applications. Measurements can be taken by inserting the probe in to the test solution and after gentle stirring, stable readings can be noted down.
Conductivity measurement range | 0.1 to 19.99 mS/cm |
Type of conductivity | High range conductivity |
Conductivity accuracy | ± 1 % F.S. |
Conductivity calibration points | 1 point |
Conductivity measurement range | 10 to 1999 µS/cm |
Type of conductivity | Mid-range conductivity |
Conductivity accuracy | ± 1 % F.S. |
Conductivity calibration points | 1 point |
Conductivity measurement range | 1.0 to 199.9 µS/cm |
Type of conductivity | Low range conductivity |
Conductivity accuracy | ± 1 % F.S. |
Conductivity calibration points | 1 point |