Benchtop Ion meter for Cl, LBIM-A10

Name: Benchtop Ion meter for Cl, LBIM-A10
Brand: Labtron.org
SKU: LBIM-A10
Rating: 4.7 (941 reviews)

Benchtop Ion meter for Cl, LBIM-A10 comes with (Cl) chloride ion selective electrode for chloride ion concentration measurement. This Ion meter comes with ± 0.5 % F.S. measurement accuracy. The direct ion concentration readout helps in elaborate measurement process. The system menu allows setting the 8 parameters like calibration points, stability condition etc. It can measure concentration in ppm, mg / L, mol / L. The mV measurement is used to check the performance of ion selective electrode.

Name

Company Name

Product

Message

Captcha

Ion measurement range	Cl range: 5 × 10<sup>6</sup> - 1 M, 1.8 - 35500 ppm
Ion measurement accuracy	± 0.5 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points
Calibration solutions	0.001, 0.01, 0.1, 1, 10, 100, 1000, 10000 ppm, mol / L, mg / L
mV range	(-1999.9) to 1999.9 mV
mV accuracy	± 0.2 mV
mV resolution	0.1 mV
Temperature measurement range	0 to 105 °C, 32 to 221 °F
Temperature accuracy	± 0.5 °C, ± 0.9 °F
Temperature resolution	0.1°C
Temperature compensation	0 to 100 °C, 32 to 212 °F
Compensation mode	Manual or automatic
Data hold function	Manual or automatic endpoint detection
Reset function	Yes
Stability condition	Low or high
Calibration due	0 to 31 days
Power off	Manual or automatic (10,20,30 minutes)
Memory	Stores up to 500 sets of data
Output	USB communication interface
Connector	BNC
Display	LCD (130 × 110 mm)
Power	DC 5 V, using AC adapter, AC 220 V / 50 Hz
Dimension (L × W × H)	210 × 188 × 60 mm
Weight	1.5 kg

Large LCD display
2 - 5 points calibration from low to high concentration
Direct ion concentration readout for elaborate measurement process
Selectable concentration units from ppm, mg / L, mol / L
mV measurements to check the performance of ion selective electrode
Temperature compensation provides accurate reading over the entire range
Stability indicator to show current measurement status
Calibration due reminder for regular calibration of the meter
Auto hold function to freeze stable reading for better viewing & recording
Automatic electrode diagnosis shows the slope of the sensor
Reset setting function
Expanded memory stores and recalls up to 500 readings
Built –in real time clock stamps
USB communication interface to transfer stored data to PC

Ion selective electrode: CL range: 1.8 - 35500 ppm
Ion standard solutions: 480 mL / bottle
Ionic strength adjuster: 480 mL / bottle
Temperature probe with sensor

Benchtop Ion meter is used to measure the chloride ion concentration present in potable water, D/W water, waste water and natural water resources using different ion concentration electrodes.

Benchtop Ion meter for Cl, LBIM-A10

Related Products of Benchtop Ion Meter

Labtron benchtop meters are easy to use. The LCD display, manual or automatic mode of calibration, universal connector and other features are included in this range to produce accurate, reliable results. It consist of benchtop meter for measuring pH, conductivity, dissolved oxygen content, Ion concentration, water hardness level. These meters are suitable for simple to complex applications in water quality testing, research and analysis etc.

Benchtop Ion meter for Br, LBIM-A14

Ion measurement range	Br range: 5 × 10<sup>6</sup> - 1 M, 0.4 - 79900 ppm
Ion measurement accuracy	± 0.5 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points

Benchtop Ion meter for Ca, LBIM-A13

Ion measurement range	Ca range: 5 × 10<sup>7</sup> - 1 M, 0.02 - 4000 ppm
Ion measurement accuracy	± 0.5 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points

Benchtop Ion meter for Cn, LBIM-A21

Ion measurement range	Cn range: 5 × 10<sup>6</sup> – 0.01 M, 0.2 – 260 ppm
Ion measurement accuracy	± 1 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points

Benchtop Ion meter for Pb, LBIM-A25

Ion measurement range	Pb range: 1×10<sup>8</sup> – 0.1M, 0.2-20700 ppm
Ion measurement accuracy	± 1 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points

Benchtop Ion meter for S, LBIM-A24

Ion measurement range	S range: 1×10<sup>7</sup> - 1M, 0.003-32100 ppm
Ion measurement accuracy	± 1 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points

Benchtop Ion meter for NH<sub>3</sub> , LBIM-A20

Ion measurement range	NH<sub>3</sub> range: 1 × 10<sup>6</sup> - 1 M, 0.02 - 17000 ppm
Ion measurement accuracy	± 1 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points

Benchtop Ion meter for Ag, LBIM-A22

Ion measurement range	Ag range: 1 × 10<sup>7</sup> - 1 M, 0.01 - 107900 ppm
Ion measurement accuracy	± 1 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points

Benchtop Ion meter for Cu, LBIM-A27

Ion measurement range	Cu range: 1×10<sup>8</sup> - 1M, 0.06-6400 ppm
Ion measurement accuracy	± 1 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points

Benchtop Ion meter for K, LBIM-A23

Ion measurement range	K range: 1×10<sup>6</sup> - 1M, 0.04 -39000 ppm
Ion measurement accuracy	± 1 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points

Benchtop Ion meter for F, LBIM-A11

Ion measurement range	F range: 1 × 10<sup>6</sup>M – saturation, 0.02 ppm to saturation
Ion measurement accuracy	± 0.5 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points

Benchtop Ion meter for NH<sub>4</sub>, LBIM-A15

Ion measurement range	NH<sub>4</sub> range: 5 × 10<sup>6</sup> – 1 M, 0.1 – 18000 ppm
Ion measurement accuracy	± 0.5 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points

Benchtop Ion meter for Cd, LBIM-A28

Ion measurement range	Cd range: 1×10<sup>6</sup>– 1M, 0.01-11200 ppm
Ion measurement accuracy	± 1 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points

Benchtop Ion meter for I, LBIM-A26

Ion measurement range	I range: 1×10<sup>8</sup>- 1M, 0.06 -127000 ppm
Ion measurement accuracy	± 1 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points

Benchtop Ion meter for Na, LBIM-A12

Ion measurement range	Na range: 1 × 10<sup>5</sup> - 1 M, 0.1 - 23000 ppm
Ion measurement accuracy	± 0.5 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points

pH Tester

Labtron pocket testers are small and compact in size, gives fast and accurate results. The Pocket testers consist of pH, ORP, TDS, dissolved oxygen, salinity and conductivity tester for various laboratory as well as outdoor applications. Measurements can be taken by inserting the probe in to the test solution and after gentle stirring, stable readings can be noted down.

Pocket pH tester LPPT-A12

pH measurement range	0.0 - 14.00 pH
Shape of electrode	Long distance planar pH electrode
pH measurement accuracy	± 0.1 pH
Calibration point	2 points

Pocket pH tester LPPT-A10

pH measurement range	0.0 - 14.00 pH
Shape of electrode	Round glass pH electrode
pH measurement accuracy	± 0.1 pH
Calibration point	2 points

Pocket pH tester LPPT-A11

pH measurement range	0.0 - 14.00 pH
Shape of electrode	Flat pH electrode
pH measurement accuracy	± 0.1 pH
Calibration point	2 points

Portable Multi Parameter Water Quality Meter

Labtron portable meters are used in quality analysis of water and other solutions. With portability, waterproof features, finds applications in indoor as well as outdoor measurement of pH, ORP, dissolved oxygen, water hardness, salinity, TDS etc.

Portable Multi-parameter Water Quality Meter LMPWM-A20

pH mode

pH measurement range	(-2.000) to 20.000 pH
pH accuracy	± 0.002 pH
pH calibration points	1 - 5 points
pH calibration solutions	USA, NIST, DIN or user defined

ORP measurement

ORP measurement range	-1999.9 to 1999.9 mV
ORP accuracy	±0.2 mV
ORP calibration points	1 point
ORP calibration solutions	mV & relative mV

Conductivity measurement

Conductivity measurement range	0 - 20.00, 200.0, 2000 µS / cm, 20.00, 200.2 mS / cm
Conductivity accuracy	± 0.5 % F.S.
Conductivity calibration points	1 - 5 points
Conductivity calibration solutions	10 µS / cm, 84 µS / cm, 1413 µS / cm, 12.88mS / cm, 111.8mS / cm
Temperature coefficient	0.0 to 10.0 % / °C
Compensation modes	Linear or pre water
Cell constant	K = 0.1, 1, 10 or user-defined
Normalization temperature	20 °C or 25 °C

TDS measurement

TDS range	0-100 ppt. (max. 200 ppt., depending on factor setting)
TDS accuracy	± 1 % F.S.
TDS factor	0.1 - 1.0 (default 0.5)

Portable Multi-parameter Water Quality Meter LMPWM-A10

pH mode

pH measurement range	(-2.000) to 20.000 pH
pH accuracy	± 0.002 pH
pH calibration points	1 - 5 points
pH calibration solutions	USA, NIST, DIN or user defined

ORP measurement

ORP measurement range	-1999.9 to 1999.9 mV
ORP accuracy	±0.2 mV
ORP calibration points	1 point
ORP calibration solutions	mV & relative mV

Ion measurement

Ion measurement range	0 to 19999 ppm, mg/L, mol/L
Ion accuracy	± 0.5 % F.S. (monovalent), ± 1 % F.S. (divalent)
Ion calibration points	2 - 5 points
Ion calibration solutions	0.001, 0.01, 0.1, 1, 10, 100, 1000, 10000 ppm, mol/L, mg/L

Conductivity measurement

Conductivity measurement range	0 - 20.00, 200.0, 2000 µS / cm, 20.00, 200.2 mS / cm
Conductivity accuracy	± 0.5 % F.S.
Conductivity calibration points	1 - 5 points
Conductivity calibration solutions	10 µS / cm, 84 µS / cm, 1413 µS / cm, 12.88mS / cm, 111.8mS / cm
Temperature coefficient	0.0 to 10.0 % / °C
Compensation modes	Linear or pre water
Cell constant	K = 0.1, 1, 10 or user-defined
Normalization temperature	20 °C or 25 °C

Portable Multi-parameter Water Quality Meter LMPWM-A11

pH mode

pH measurement range	(-2.000) to 20.000 pH
pH accuracy	± 0.002 pH
pH calibration points	1 - 5 points
pH calibration solutions	USA, NIST, DIN or user defined

ORP measurement

ORP measurement range	-1999.9 to 1999.9 mV
ORP accuracy	±0.2 mV
ORP calibration points	1 point
ORP calibration solutions	mV & relative mV

Ion measurement

Ion measurement range
Ion accuracy
Ion calibration points
Ion calibration solutions

Conductivity measurement

Conductivity measurement range	0 - 20.00, 200.0, 2000 µS / cm, 20.00, 200.2 mS / cm
Conductivity accuracy	± 0.5 % F.S.
Conductivity calibration points	1 - 5 points
Conductivity calibration solutions	10 µS / cm, 84 µS / cm, 1413 µS / cm, 12.88mS / cm, 111.8mS / cm
Temperature coefficient	0.0 to 10.0 % / °C
Compensation modes	Linear or pre water
Cell constant	K = 0.1, 1, 10 or user-defined
Normalization temperature	20 °C or 25 °C

Portable Conductivity Meter

Portable Conductivity Meter LPCM-A12

Conductivity

Conductivity measurement range	0.01 to 20.00, 200.0, 2000 µS/cm, 20.00, 200 mS/cm
Conductivity accuracy	±0.5% F.S
Conductivity calibration points	1 to 5 points
Conductivity calibration solutions	10 µS/cm, 84 µS/cm, 1413 µS/cm, 12.88 mS/cm, 111.8 mS/cm or Custom
Conductivity resolution	0.001, 0.01, 0.1, 1

Salinity

Salinity range	0.00 to 80.00 ppt, 0.00 to 42.00 psu
Salinity accuracy	±1% F.S
Salinity measurement modes	Practical Salinity (psu) or Natural Seawater (ppt)
Salinity resolution	0.01, 0.1, 1

Temperature

Temperature measuring range	0 105 °C, 32 to 221 °F
Temperature measuring accuracy	± °0.5 C, ± 0.9 °F
Temperature calibration points	1 point
Temperature resolution	0.1 °C, 0.1 °F

Temperature compensation

0 to 100 °C, 32 to 212 ° F, Manual or Automatic

Portable Conductivity Meter LPCM-A11

Conductivity

Conductivity measurement range	0.01 to 20.00, 200.0, 2000 µS/cm, 20.00, 200 mS/cm
Conductivity accuracy	±0.5% F.S
Conductivity calibration points	1 to 5 points
Conductivity calibration solutions	10 µS/cm, 84 µS/cm, 1413 µS/cm, 12.88 mS/cm, 111.8 mS/cm or Custom
Conductivity resolution	0.001, 0.01, 0.1, 1

TDS

TDS range	0 10.00, 100.0, 1000 ppm, 10.00, 100 ppt (Max. 200 ppt)
TDS accuracy	±1 % F.S
TDS factor	0.01 to 1.00 (Default 0.5)
TDS resolution	0.01, 0.1, 1

Temperature

Temperature measuring range	0 105 °C, 32 to 221 °F
Temperature measuring accuracy	± °0.5 C, ± 0.9 °F
Temperature calibration points	1 point
Temperature resolution	0.1 °C, 0.1 °F

Temperature compensation

0 to 100 °C, 32 to 212 ° F, Manual or Automatic

Portable Conductivity Meter LPCM-A10

Conductivity

Conductivity measurement range	0.01 to 20.00, 200.0, 2000 µS/cm, 20.00, 200 mS/cm
Conductivity accuracy	±0.5% F.S
Conductivity calibration points	1 to 3 points
Conductivity calibration solutions	10 µS/cm, 84 µS/cm, 1413 µS/cm, 12.88 mS/cm, 111.8 mS/cm or Custom
Conductivity resolution	0.001, 0.01, 0.1, 1

Temperature

Temperature measuring range	0 105 °C, 32 to 221 °F
Temperature measuring accuracy	± °0.5 C, ± 0.9 °F
Temperature calibration points	1 point
Temperature resolution	0.1 °C, 0.1 °F

Temperature compensation

0 to 100 °C, 32 to 212 ° F, Manual or Automatic

Temperature coefficient

Linear

Conductivity Tester

Pocket Conductivity tester LPCT-A10

Conductivity measurement range	1.0 to 199.9 µS/cm
Type of conductivity	Low range conductivity
Conductivity accuracy	± 1 % F.S.
Conductivity calibration points	1 point

Pocket Conductivity tester LPCT-A11

Conductivity measurement range	10 to 1999 µS/cm
Type of conductivity	Mid-range conductivity
Conductivity accuracy	± 1 % F.S.
Conductivity calibration points	1 point

Pocket Conductivity tester LPCT-A12

Conductivity measurement range	0.1 to 19.99 mS/cm
Type of conductivity	High range conductivity
Conductivity accuracy	± 1 % F.S.
Conductivity calibration points	1 point

TSS Meter

TSS Meter LTSS-A10

Measurement range	20000 mg/L <br/> 0.01 mg/L ~ 45000 mg/L <br/> 0.01 mg/L ~ 120000 mg/L
Measurement accuracy	± 2 % F.S. of its range ( Depending on the homogeneity of sludge)
Pressure range	≤ 0.4 Mpa
Flow rate	≤ 2.5 m/s, 8.2 ft./s