Bench top turbidity meter (with built-in printer) LTM-C10 comes with microprocessor controlled system, works on 90° scattered light principle to measure water turbidity in nephelometric turbidity unit i.e. NTU. The formazine standard solution of turbidity mentioned in ISO 7027 is used for turbidity analysis. This turbidity meter delivers highly accurate results with better numerical calculations to meet GLP standards.
| Measuring range (NTU) | 0 to 100, 0 to 200 |
|---|---|
| Minimum readout value (NTU) | 0.01 |
| Calibration point | 2 |
| Sample volume | 18 to 20 ml |
| Principle method | 90° scattered light |
| Operating temperature | Room Temperature |
| Working temperature | Room Temperature |
| Light source | Infrared-emitting diode (850 nm λ) |
| Detector | Silicon photodiode |
| Error value | (F.S) ±2%, ±3%,±5% |
| Zero drift | (F.S) ±0.5% (0.02 NTU) |
| Reset functions | No |
| Memory | Nil |
| Output | RS232 data communication interface |
| Dimension | 415 × 375 × 200 mm |
| Weight | 4 kg |
| Power batteries | DC 1.5 V, 5 AA alkaline batteries |
| Power supply | AC 220 V, 50 Hz |
Used in water treatment plants, swimming pool, water recycling units, research and quality testing laboratories of pharmacy, life science, food, and beverage industry.
| Measuring range (NTU) | 0 to 10, 0 to 100, 0 to 200, 0 to 500, 0 to 1000 |
| Minimum readout value (NTU) | 0.001 |
| Calibration point | 5 |
| Sample volume | 18 to 20 ml |
| Measuring range (NTU) | 0 to 10, 0 to 100, 0 to 200, 0 to 500, 0 to 1000 |
| Minimum readout value (NTU) | 0.01 |
| Calibration point | 5 |
| Sample volume | 18 to 20 ml |
| Measuring range (NTU) | 0 to 10, 0 to 100, 0 to 200, 0 to 500 |
| Minimum readout value (NTU) | 0.001 |
| Calibration point | 4 |
| Sample volume | 18 to 20 ml |
| Measuring range (NTU) | 0 to 100, 100 to 1000 |
| Minimum readout value (NTU) | 0.01, 0.1 |
| Calibration point | 7 |
| Sample volume | 5 to 10 ml |
| Measuring range (NTU) | 0 to 50, 0 to 100, 0 to 200, 0 to 400 |
| Minimum readout value (NTU) | 0.01, 0.1 |
| Calibration point | 4 |
| Sample volume | 5 to 10 ml |
| Measuring range (NTU) | 0 to 100, 100 to 800 |
| Minimum readout value (NTU) | 0.01, 0.1 |
| Calibration point | 6 |
| Sample volume | 5 to 10 ml |
| Measuring range (NTU) | 0 to 100, 100 to 400 |
| Minimum readout value (NTU) | 0.01, 0.1 |
| Calibration point | 5 |
| Sample volume | 5 to 10 ml |
| Measuring range (NTU) | 0 to 100, 100 to 500 |
| Minimum readout value (NTU) | 0.01, 0.1 |
| Calibration point | 6 |
| Sample volume | 5 to 10 ml |
| Measuring range (NTU) | 0 to 50, 0 to 100, 0 to 200 |
| Minimum readout value (NTU) | 0.01, 0.1 |
| Calibration point | 3 |
| Sample volume | 5 to 10 ml |
| Measuring range (NTU) | 0 to 200 |
| Minimum readout value (NTU) | 0.1 |
| Calibration point | Nil |
| Sample volume | 5 to 10 ml |
| Measuring range (NTU) | 0 to 50, 0 to 100, 0 to 200, 0 to 400, 0 to 800, 0 to 1000 |
| Minimum readout value (NTU) | 0.01, 0.1 |
| Calibration point | 6 |
| Sample volume | 5 to 10 ml |
| Measuring range (NTU) | 0 to 10, 0 to 100 |
| Minimum readout value (NTU) | 0.001 |
| Calibration point | 2 |
| Sample volume | 18 to 20 ml |
| Light source | LED/860 nm (Wavelength) |
| Readings display | LCD |
| Unit switches | NTU, FTU, EBC, ASBC |
| Measurement range | 0.00-20.0; 20.01-200; 200.01-1000 NTU |
| Measuring range (NTU) | 0 to 100 |
| Minimum readout value (NTU) | 0.01, 0.1 |
| Calibration point | 1 |
| Sample volume | 5 to 10 ml |
| Measuring range (NTU) | 0 to 100, 0 to 200 |
| Minimum readout value (NTU) | 0.01, 0.1 |
| Calibration point | 4 |
| Sample volume | 5 to 10 ml |
| pH measurement range | 01.00 to 15.00 pH |
| pH calibration points | 1 to 3 points |
| pH Buffer Solutions | USA (pH 4.01, 7.00, 10.01) or NIST (pH 4.01, 6.86, 9.18) |
| pH accuracy | ± 0.01 pH |
Labtron pocket testers are small and compact in size, gives fast and accurate results. The Pocket testers consist of pH, ORP, TDS, dissolved oxygen, salinity and conductivity tester for various laboratory as well as outdoor applications. Measurements can be taken by inserting the probe in to the test solution and after gentle stirring, stable readings can be noted down.
| Dissolved oxygen range | 0.0 to 20.0 mg/L (or ppm) |
| Dissolved oxygen accuracy | ± 0.5 mg/L |
| % of saturation of oxygen | 0.0 to 200.0% |
| Sensor type | Polarographic dissolved oxygen probe |
Labtron pocket testers are small and compact in size, gives fast and accurate results. The Pocket testers consist of pH, ORP, TDS, dissolved oxygen, salinity and conductivity tester for various laboratory as well as outdoor applications. Measurements can be taken by inserting the probe in to the test solution and after gentle stirring, stable readings can be noted down.
| TDS range | 5 - 1000 ppm |
| TDS accuracy | ± 1 % F.S. |
| TDS factor | 0.4 to 1.0 (default 0.5) |
| Calibration points | 1 point |
| TDS range | 0.05 - 10.00 ppt |
| TDS accuracy | ± 1 % F.S. |
| TDS factor | 0.4 to 1.0 (default 0.5) |
| Calibration points | 1 point |
| TDS range | 0.5 - 100.0 ppm |
| TDS accuracy | ± 1 % F.S. |
| TDS factor | 0.4 to 1.0 (default 0.5) |
| Calibration points | 1 point |
Labtron pocket testers are small and compact in size, gives fast and accurate results. The Pocket testers consist of pH, ORP, TDS, dissolved oxygen, salinity and conductivity tester for various laboratory as well as outdoor applications. Measurements can be taken by inserting the probe in to the test solution and after gentle stirring, stable readings can be noted down.
| pH measurement range | 0.0 - 14.00 pH |
| Shape of electrode | Round glass pH electrode |
| pH measurement accuracy | ± 0.1 pH |
| Calibration point | 2 points |
| pH measurement range | 0.0 - 14.00 pH |
| Shape of electrode | Long distance planar pH electrode |
| pH measurement accuracy | ± 0.1 pH |
| Calibration point | 2 points |
| pH measurement range | 0.0 - 14.00 pH |
| Shape of electrode | Flat pH electrode |
| pH measurement accuracy | ± 0.1 pH |
| Calibration point | 2 points |
| Measurement range | 20000 mg/L <br/> 0.01 mg/L ~ 45000 mg/L <br/> 0.01 mg/L ~ 120000 mg/L |
| Measurement accuracy | ± 2 % F.S. of its range ( Depending on the homogeneity of sludge) |
| Pressure range | ≤ 0.4 Mpa |
| Flow rate | ≤ 2.5 m/s, 8.2 ft./s |