Benchtop Ion meter for Cn, LBIM-A21

Name: Benchtop Ion meter for Cn, LBIM-A21
Brand: Labtron.org
SKU: LBIM-A21
Rating: 4.9 (777 reviews)

Benchtop Ion meter for Cn, LBIM-A21 comes with (Cn ) cyanide ion selective electrode for cyanide ion concentration measurement. This Ion meter comes with ± 1 % F.S. measurement accuracy. Its direct ion concentration readout helps in elaborate measurement process. The system menu allows setting the 8 parameters like calibration points, stability condition etc. It can measure concentration in ppm, mg / L, mol / L. The mV measurement is used to check the performance of ion selective electrode.

Name

Company Name

Product

Message

Captcha

Ion measurement range	Cn range: 5 × 10<sup>6</sup> – 0.01 M, 0.2 – 260 ppm
Ion measurement accuracy	± 1 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points
Calibration solutions	0.001, 0.01, 0.1, 1, 10, 100, 1000, 10000 ppm, mol / L, mg / L
mV range	(-1999.9) to 1999.9 mV
mV accuracy	± 0.2 mV
mV resolution	0.1 mV
Temperature measurement range	0 to 105 °C, 32 to 221 °F
Temperature accuracy	± 0.5 °C, ± 0.9 °F
Temperature resolution	0.1°C
Temperature compensation	0 to 100 °C, 32 to 212 °F
Compensation mode	Manual or automatic
Data hold function	Manual or automatic endpoint detection
Reset function	Yes
Stability condition	Low or high
Calibration due	0 to 31 days
Power off	Manual or automatic (10,20,30 minutes)
Memory	Stores up to 500 sets of data
Output	USB communication interface
Connector	BNC
Display	LCD (130 × 110 mm)
Power	DC 5 V, using AC adapter, AC 220 V / 50 Hz
Dimension (L × W × H)	210 × 188 × 60 mm
Weight	1.5 kg

Large LCD display
2 - 5 points calibration from low to high concentration
Direct ion concentration readout for elaborate measurement process
Selectable concentration units from ppm, mg / L, mol / L
mV measurements to check the performance of ion selective electrode
Temperature compensation provides accurate reading over the entire range
Stability indicator to show current measurement status
Calibration due reminder for regular calibration of the meter
Auto hold function to freeze stable reading for better viewing & recording
Automatic electrode diagnosis shows the slope of the sensor
Reset setting function
Expanded memory stores and recalls up to 500 readings
Built –in real time clock stamps
USB communication interface to transfer stored data to PC

Ion selective electrode: Cn range: 0.2 – 260 ppm
Ion standard solutions: 480 mL / bottle
Ionic strength adjuster: 480 mL / bottle
Temperature probe with sensor

Benchtop Ion meter is used to measure the cyanide ion concentration present in potable water, D/W water, waste water and natural water resources using different ion concentration electrodes.

Benchtop Ion meter for Cn, LBIM-A21

Related Products of Benchtop Ion Meter

Labtron benchtop meters are easy to use. The LCD display, manual or automatic mode of calibration, universal connector and other features are included in this range to produce accurate, reliable results. It consist of benchtop meter for measuring pH, conductivity, dissolved oxygen content, Ion concentration, water hardness level. These meters are suitable for simple to complex applications in water quality testing, research and analysis etc.

Benchtop Ion meter for I, LBIM-A26

Ion measurement range	I range: 1×10<sup>8</sup>- 1M, 0.06 -127000 ppm
Ion measurement accuracy	± 1 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points

Benchtop Ion meter for NH<sub>3</sub> , LBIM-A20

Ion measurement range	NH<sub>3</sub> range: 1 × 10<sup>6</sup> - 1 M, 0.02 - 17000 ppm
Ion measurement accuracy	± 1 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points

Benchtop Ion meter for K, LBIM-A23

Ion measurement range	K range: 1×10<sup>6</sup> - 1M, 0.04 -39000 ppm
Ion measurement accuracy	± 1 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points

Benchtop Ion meter for F, LBIM-A11

Ion measurement range	F range: 1 × 10<sup>6</sup>M – saturation, 0.02 ppm to saturation
Ion measurement accuracy	± 0.5 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points

Benchtop Ion meter for Cu, LBIM-A27

Ion measurement range	Cu range: 1×10<sup>8</sup> - 1M, 0.06-6400 ppm
Ion measurement accuracy	± 1 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points

Benchtop Ion meter for Ca, LBIM-A13

Ion measurement range	Ca range: 5 × 10<sup>7</sup> - 1 M, 0.02 - 4000 ppm
Ion measurement accuracy	± 0.5 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points

Benchtop Ion meter for Cd, LBIM-A28

Ion measurement range	Cd range: 1×10<sup>6</sup>– 1M, 0.01-11200 ppm
Ion measurement accuracy	± 1 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points

Benchtop Ion meter for Na, LBIM-A12

Ion measurement range	Na range: 1 × 10<sup>5</sup> - 1 M, 0.1 - 23000 ppm
Ion measurement accuracy	± 0.5 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points

Benchtop Ion meter for Pb, LBIM-A25

Ion measurement range	Pb range: 1×10<sup>8</sup> – 0.1M, 0.2-20700 ppm
Ion measurement accuracy	± 1 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points

Benchtop Ion meter for Br, LBIM-A14

Ion measurement range	Br range: 5 × 10<sup>6</sup> - 1 M, 0.4 - 79900 ppm
Ion measurement accuracy	± 0.5 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points

Benchtop Ion meter for Cl, LBIM-A10

Ion measurement range	Cl range: 5 × 10<sup>6</sup> - 1 M, 1.8 - 35500 ppm
Ion measurement accuracy	± 0.5 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points

Benchtop Ion meter for NH<sub>4</sub>, LBIM-A15

Ion measurement range	NH<sub>4</sub> range: 5 × 10<sup>6</sup> – 1 M, 0.1 – 18000 ppm
Ion measurement accuracy	± 0.5 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points

Benchtop Ion meter for Ag, LBIM-A22

Ion measurement range	Ag range: 1 × 10<sup>7</sup> - 1 M, 0.01 - 107900 ppm
Ion measurement accuracy	± 1 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points

Benchtop Ion meter for S, LBIM-A24

Ion measurement range	S range: 1×10<sup>7</sup> - 1M, 0.003-32100 ppm
Ion measurement accuracy	± 1 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points

Turbidity Meter

Portable Turbidity Meter LTM-A11

Measuring range (NTU)	0 to 100, 0 to 200
Minimum readout value (NTU)	0.01, 0.1
Calibration point	4
Sample volume	5 to 10 ml

Portable turbidity meter LTM-A16

Light source	LED/860 nm (Wavelength)
Readings display	LCD
Unit switches	NTU, FTU, EBC, ASBC
Measurement range	0.00-20.0; 20.01-200; 200.01-1000 NTU

Portable Turbidity Meter LTM-A10

Measuring range (NTU)	0 to 200
Minimum readout value (NTU)	0.1
Calibration point	Nil
Sample volume	5 to 10 ml

Portable Conductivity Meter

Portable Conductivity Meter LPCM-A11

Conductivity

Conductivity measurement range	0.01 to 20.00, 200.0, 2000 µS/cm, 20.00, 200 mS/cm
Conductivity accuracy	±0.5% F.S
Conductivity calibration points	1 to 5 points
Conductivity calibration solutions	10 µS/cm, 84 µS/cm, 1413 µS/cm, 12.88 mS/cm, 111.8 mS/cm or Custom
Conductivity resolution	0.001, 0.01, 0.1, 1

TDS

TDS range	0 10.00, 100.0, 1000 ppm, 10.00, 100 ppt (Max. 200 ppt)
TDS accuracy	±1 % F.S
TDS factor	0.01 to 1.00 (Default 0.5)
TDS resolution	0.01, 0.1, 1

Temperature

Temperature measuring range	0 105 °C, 32 to 221 °F
Temperature measuring accuracy	± °0.5 C, ± 0.9 °F
Temperature calibration points	1 point
Temperature resolution	0.1 °C, 0.1 °F

Temperature compensation

0 to 100 °C, 32 to 212 ° F, Manual or Automatic

Portable Conductivity Meter LPCM-A10

Conductivity

Conductivity measurement range	0.01 to 20.00, 200.0, 2000 µS/cm, 20.00, 200 mS/cm
Conductivity accuracy	±0.5% F.S
Conductivity calibration points	1 to 3 points
Conductivity calibration solutions	10 µS/cm, 84 µS/cm, 1413 µS/cm, 12.88 mS/cm, 111.8 mS/cm or Custom
Conductivity resolution	0.001, 0.01, 0.1, 1

Temperature

Temperature measuring range	0 105 °C, 32 to 221 °F
Temperature measuring accuracy	± °0.5 C, ± 0.9 °F
Temperature calibration points	1 point
Temperature resolution	0.1 °C, 0.1 °F

Temperature compensation

0 to 100 °C, 32 to 212 ° F, Manual or Automatic

Temperature coefficient

Linear

Portable Conductivity Meter LPCM-A12

Conductivity

Conductivity measurement range	0.01 to 20.00, 200.0, 2000 µS/cm, 20.00, 200 mS/cm
Conductivity accuracy	±0.5% F.S
Conductivity calibration points	1 to 5 points
Conductivity calibration solutions	10 µS/cm, 84 µS/cm, 1413 µS/cm, 12.88 mS/cm, 111.8 mS/cm or Custom
Conductivity resolution	0.001, 0.01, 0.1, 1

Salinity

Salinity range	0.00 to 80.00 ppt, 0.00 to 42.00 psu
Salinity accuracy	±1% F.S
Salinity measurement modes	Practical Salinity (psu) or Natural Seawater (ppt)
Salinity resolution	0.01, 0.1, 1

Temperature

Temperature measuring range	0 105 °C, 32 to 221 °F
Temperature measuring accuracy	± °0.5 C, ± 0.9 °F
Temperature calibration points	1 point
Temperature resolution	0.1 °C, 0.1 °F

Temperature compensation

0 to 100 °C, 32 to 212 ° F, Manual or Automatic

TDS Tester

Labtron pocket testers are small and compact in size, gives fast and accurate results. The Pocket testers consist of pH, ORP, TDS, dissolved oxygen, salinity and conductivity tester for various laboratory as well as outdoor applications. Measurements can be taken by inserting the probe in to the test solution and after gentle stirring, stable readings can be noted down.

Pocket TDS tester LPTS-A10

TDS range	0.5 - 100.0 ppm
TDS accuracy	± 1 % F.S.
TDS factor	0.4 to 1.0 (default 0.5)
Calibration points	1 point

Pocket TDS tester LPTS-A12

TDS range	0.05 - 10.00 ppt
TDS accuracy	± 1 % F.S.
TDS factor	0.4 to 1.0 (default 0.5)
Calibration points	1 point

Pocket TDS tester LPTS-A11

TDS range	5 - 1000 ppm
TDS accuracy	± 1 % F.S.
TDS factor	0.4 to 1.0 (default 0.5)
Calibration points	1 point

Multi Parameter Water Quality Analyzer

Multi parameter water quality analyzer LMWA-A10

COD

COD determination range	2 to 10000 mg/ L
COD measurement accuracy	COD < 50 mg/ L, ≤ ± 10 % and COD > 50 mg/ L, ≤ ± 5 %
COD minimum detection limit	0.1 mg/ L
COD measurement time	20 minutes
COD repeatability	≤ ± 5 %
Processing sample number per batch
Consumables for colorimetric COD measurement	Colorimetric tubes and Cuvette
COD reactor digestion temperature	165 ± 0.5°C
COD reactor digestion time	10 min
COD reactor time setting switches	3 pcs
Anti-chlorine interference	(Cl) < 1000 mg/ L No effect

Ammonia nitrogen

Ammonia nitrogen determination range	0.02 to 60 mg/ L
Ammonia nitrogen measurement accuracy	≤ ± 10 %
Ammonia nitrogen minimum detection limit	0.01 mg/ L
Ammonia nitrogen measurement time	10 to 15 minutes
Ammonia nitrogen repeatability	≤ ± 5 %
Processing sample number per batch
Consumables for colorimetric ammonia nitrogen measurement	Colorimetric tubes and Cuvette
Ammonia nitrogen reactor time setting switches	3 pcs

Total phosphorous

Total phosphorous determination range	0.002 to 20 mg/ L
Total phosphorous total phosphorous measurement accuracy	≤ ± 5 %
Total phosphorous minimum detection limit	0.001 mg/ L
Total phosphorous measurement time	35 to 50 minutes
Total phosphorous repeatability	≤ ± 5 %
Processing sample number per batch
Consumables for colorimetric total phosphorous measurement	Colorimetric tubes and Cuvette
Total phosphorous reactor digestion temperature	120 ± 0.5°C
Total phosphorous reactor digestion time	30 min
Total phosphorous reactor time setting switches	3 pcs

Turbidity

Turbidity determination range	0.5 to 400 NTU
Turbidity measurement accuracy	≤ ± 5 %
Turbidity minimum detection limit	0.1 NTU
Turbidity measurement time	1 minute
Turbidity repeatability	≤ ± 5 %
Consumables for colorimetric turbidity measurement	Colorimetric Cuvette

Multi parameter water quality analyzer LMWA-A11

COD

COD determination range	5 to 5000 mg/ L
COD measurement accuracy	COD < 50 mg/ L, ≤ ± 10 % and COD > 50 mg/ L, ≤ ± 5 %
COD minimum detection limit	0.1 mg/ L
COD measurement time	20 minutes
COD repeatability	≤ ± 5 %
Processing sample number per batch	12 pcs
Consumables for colorimetric COD measurement	Colorimetric tubes and Cuvette
COD reactor digestion temperature	165 ± 0.5°C
COD reactor digestion time	10 min
COD reactor time setting switches	3 pcs
Anti-chlorine interference	(Cl) < 1000 mg/ L No effect

Ammonia nitrogen

Ammonia nitrogen determination range	0.02 to 30 mg/ L
Ammonia nitrogen measurement accuracy	≤ ± 10 %
Ammonia nitrogen minimum detection limit	0.01 mg/ L
Ammonia nitrogen measurement time	10 to 15 minutes
Ammonia nitrogen repeatability	≤ ± 5 %
Processing sample number per batch	20 pcs
Consumables for colorimetric ammonia nitrogen measurement	Colorimetric tubes and Cuvette
Ammonia nitrogen reactor time setting switches	3 pcs

Total phosphorous

Total phosphorous determination range	0.002 to 10 mg/ L
Total phosphorous total phosphorous measurement accuracy	≤ ± 5 %
Total phosphorous minimum detection limit	0.001 mg/ L
Total phosphorous measurement time	35 to 50 minutes
Total phosphorous repeatability	≤ ± 5 %
Processing sample number per batch	12 pcs
Consumables for colorimetric total phosphorous measurement	Colorimetric tubes and Cuvette
Total phosphorous reactor digestion temperature	120 ± 0.5°C
Total phosphorous reactor digestion time	30 min
Total phosphorous reactor time setting switches	3 pcs

Turbidity

Turbidity determination range	0.5 to 400 NTU
Turbidity measurement accuracy	≤ ± 5 %
Turbidity minimum detection limit	0.1 NTU
Turbidity measurement time	1 minute
Turbidity repeatability	≤ ± 5 %
Consumables for colorimetric turbidity measurement	Colorimetric Cuvette

ORP Tester

Pocket ORP tester LPOT-A10

Sensor type	Platinum sensor
Connector	6 pin
ORP measurement range	(-999) to 999 mV
ORP accuracy	± 2 mV

Pocket ORP tester LPOT-A11

Connector	BNC
ORP measurement range	(-999) to 999 mV
ORP accuracy	± 2 mV
ORP resolution	1 mV