Portable Chlorine Meter LPCL-A10 is small size designed and developed based on colorimetric method. Designed with LED light source and offers 515 nm wavelength of light. It directly measure residual chlorine, total chlorine and chlorine dioxide in water. It is convenient, accurate and reliable. It offers high-performance low-power single-chip technology, good man-machine interface. Features with Auto-read senses and locks the measurement endpoint. The method is in line with the national standards for determining relevant indicators in the field of water quality analysis.
| Residual chlorine/total chlorine |
|
|---|---|
| Chlorine dioxide |
|
| Light source | LED |
| Wavelength of light | 515 nm |
| Dimension | 230 × 86 × 47 mm |
| Power supply | AA Battery or 5V DC 1A |
| Weight | 0.4 kg |
Portable Chlorine Meter used for the determination of residual chlorine, total chlorine and chlorine dioxide in drinking water, landscape water, medical wastewater, swimming pool water and disinfectant solution.
Labtron pocket testers are small and compact in size, gives fast and accurate results. The Pocket testers consist of pH, ORP, TDS, dissolved oxygen, salinity and conductivity tester for various laboratory as well as outdoor applications. Measurements can be taken by inserting the probe in to the test solution and after gentle stirring, stable readings can be noted down.
| Conductivity measurement range | 0.1 to 19.99 mS/cm |
| Type of conductivity | High range conductivity |
| Conductivity accuracy | ± 1 % F.S. |
| Conductivity calibration points | 1 point |
| Conductivity measurement range | 1.0 to 199.9 µS/cm |
| Type of conductivity | Low range conductivity |
| Conductivity accuracy | ± 1 % F.S. |
| Conductivity calibration points | 1 point |
| Conductivity measurement range | 10 to 1999 µS/cm |
| Type of conductivity | Mid-range conductivity |
| Conductivity accuracy | ± 1 % F.S. |
| Conductivity calibration points | 1 point |
Labtron benchtop meters are easy to use. The LCD display, manual or automatic mode of calibration, universal connector and other features are included in this range to produce accurate, reliable results. It consist of benchtop meter for measuring pH, conductivity, dissolved oxygen content, Ion concentration, water hardness level. These meters are suitable for simple to complex applications in water quality testing, research and analysis etc.
| Conductivity measurement range | 0.000 μS/cm to 3000mS/cm |
| Resistivity measurement range | 5.00 Ω·cm to 100.0 MΩ·cm |
| TDS measurement range | 0.000 mg/L to 1000g/L |
| Salinity measurement range | 0.00 to 8.00 % |
| Conductivity measurement range | 0 - 20.0, 200.0, 2000 µS / cm, 200.0 mS / cm |
| Conductivity accuracy | ± 1 % F.S. |
| Conductivity resolution | 0.01, 0.1, 1 |
| Conductivity calibration solutions | 10 µS / cm , 84 µS / cm, 1413 µS / cm, 12.88 mS / cm, 111.8 mS / cm |
| Conductivity Mode |
|
||||||||||||
| TDS Mode |
|
||||||||||||
| Temperature Mode |
|
||||||||||||
| Cell constant | K=0.1, 1, 10 |
Labtron portable meters are used in quality analysis of water and other solutions. With portability, waterproof features, finds applications in indoor as well as outdoor measurement of pH, ORP, dissolved oxygen, water hardness, salinity, TDS etc.
| Dissolved oxygen range | 0.0 - 20.0 mg / L (or ppm) |
| Dissolved oxygen accuracy | ± 0.2 mg / L |
| Resolution | 0.01 mg / L |
| Calibration points | 1 - 2 points |
| Dissolved oxygen range | 0.0 to 20.0 mg / L (or ppm) |
| Dissolved oxygen accuracy | ± 0.5 mg / L |
| Resolution | 0.1 mg / L |
| Calibration points | 1 - 2 points |
| Measuring range | Water activity 0 to 0.980 aw (no condensing ) |
| Temperature range | 0 to 50°C |
| Measurement accuracy | ± 0.015 aw |
| Temperature accuracy | ± 0.5°C |
| Range | 0 to 1.0 aw |
| Resolution | 0 to 1.0 aw |
| Accuracy | ± 0.02 aw |
| Sensor | Nonconductive humidity sensor |
Labtron pocket testers are small and compact in size, gives fast and accurate results. The Pocket testers consist of pH, ORP, TDS, dissolved oxygen, salinity and conductivity tester for various laboratory as well as outdoor applications. Measurements can be taken by inserting the probe in to the test solution and after gentle stirring, stable readings can be noted down.
| pH measurement range | 0.0 - 14.00 pH |
| Shape of electrode | Flat pH electrode |
| pH measurement accuracy | ± 0.1 pH |
| Calibration point | 2 points |
| pH measurement range | 0.0 - 14.00 pH |
| Shape of electrode | Long distance planar pH electrode |
| pH measurement accuracy | ± 0.1 pH |
| Calibration point | 2 points |
| pH measurement range | 0.0 - 14.00 pH |
| Shape of electrode | Round glass pH electrode |
| pH measurement accuracy | ± 0.1 pH |
| Calibration point | 2 points |