Benchtop Conductivity Meter LBCM-A13 with 7 inch display conducts up to 5 point calibration, automatically recognizes calibration standards. Comes with 03 reading mode: fast, medium, strict, custom to balance the work operations. Complied with GLP specifications, meter allows user to carry data statistics, measure results, carry out and review, analyze, and compare statistics.
| Conductivity measurement range | 0.000 μS/cm to 3000mS/cm | ||||||
|---|---|---|---|---|---|---|---|
| Resistivity measurement range | 5.00 Ω·cm to 100.0 MΩ·cm | ||||||
| TDS measurement range | 0.000 mg/L to 1000g/L | ||||||
| Salinity measurement range | 0.00 to 8.00 % | ||||||
| Temperature measurement range | -5.0 to 135.0 °C | ||||||
| Conductivity accuracy | ± 0.5 % FS | ||||||
| Resistivity accuracy | ± 0.5 % FS | ||||||
| TDS accuracy | ± 0.5 % FS | ||||||
| Salinity accuracy | ± 0.1 % | ||||||
| Temperature accuracy | ± 0.1 °C | ||||||
| Automatic temperature compensation | Yes | ||||||
| Automatic calibration | Yes | ||||||
| Automatic range switching | Yes | ||||||
| Calibration function | Yes | ||||||
| Reading mode |
|
||||||
| Data interface | RS232, USB | ||||||
| Data storage | 1000 sets | ||||||
| Complied with GLP specifications | Yes | ||||||
| Power supply | (Input: AC 100 to 240 V, 1.35 A) (Output: DC 24 V, 3A) | ||||||
| Dimension | 280 × 280 × 130 mm | ||||||
| Weight | 2.5 kg |
| Accessories No. | Name |
| 1 | Conductivity Probe (K=0.01) |
| 2 | Conductivity Probe (K=0.1) |
| 3 | Conductivity Probe (K=1) |
| 4 | Conductivity Probe (K=10) |
Used to test Conductivity, TDS, Salinity, resistivity values of different type of liquid such as pure, hard/low conductivity water, distilled water. Also used in water purification labs, water testing and management plants, and water processing and packaging units for quality and research purpose.
Labtron benchtop meters are easy to use. The LCD display, manual or automatic mode of calibration, universal connector and other features are included in this range to produce accurate, reliable results. It consist of benchtop meter for measuring pH, conductivity, dissolved oxygen content, Ion concentration, water hardness level. These meters are suitable for simple to complex applications in water quality testing, research and analysis etc.
| Conductivity Mode |
|
||||||||||||
| TDS Mode |
|
||||||||||||
| Temperature Mode |
|
||||||||||||
| Cell constant | K=0.1, 1, 10 |
| Conductivity measurement range | 0 - 20.0, 200.0, 2000 µS / cm, 200.0 mS / cm |
| Conductivity accuracy | ± 1 % F.S. |
| Conductivity resolution | 0.01, 0.1, 1 |
| Conductivity calibration solutions | 10 µS / cm , 84 µS / cm, 1413 µS / cm, 12.88 mS / cm, 111.8 mS / cm |
| Conductivity |
|
||||||||||
| TDS |
|
||||||||||
| Temperature |
|
||||||||||
| Temperature compensation | 0 to 100 °C, 32 to 212 ° F, Manual or Automatic |
| Conductivity |
|
||||||||||
| Temperature |
|
||||||||||
| Temperature compensation | 0 to 100 °C, 32 to 212 ° F, Manual or Automatic | ||||||||||
| Temperature coefficient | Linear |
| Conductivity |
|
||||||||||
| Salinity |
|
||||||||||
| Temperature |
|
||||||||||
| Temperature compensation | 0 to 100 °C, 32 to 212 ° F, Manual or Automatic |
| Measurement range | 20000 mg/L <br/> 0.01 mg/L ~ 45000 mg/L <br/> 0.01 mg/L ~ 120000 mg/L |
| Measurement accuracy | ± 2 % F.S. of its range ( Depending on the homogeneity of sludge) |
| Pressure range | ≤ 0.4 Mpa |
| Flow rate | ≤ 2.5 m/s, 8.2 ft./s |
| Residual chlorine/total chlorine |
|
||||||||
| Chlorine dioxide |
|
||||||||
| Light source | LED | ||||||||
| Wavelength of light | 515 nm |
Labtron pocket testers are small and compact in size, gives fast and accurate results. The Pocket testers consist of pH, ORP, TDS, dissolved oxygen, salinity and conductivity tester for various laboratory as well as outdoor applications. Measurements can be taken by inserting the probe in to the test solution and after gentle stirring, stable readings can be noted down.
| Conductivity measurement range | 0.1 to 19.99 mS/cm |
| Type of conductivity | High range conductivity |
| Conductivity accuracy | ± 1 % F.S. |
| Conductivity calibration points | 1 point |
| Conductivity measurement range | 10 to 1999 µS/cm |
| Type of conductivity | Mid-range conductivity |
| Conductivity accuracy | ± 1 % F.S. |
| Conductivity calibration points | 1 point |
| Conductivity measurement range | 1.0 to 199.9 µS/cm |
| Type of conductivity | Low range conductivity |
| Conductivity accuracy | ± 1 % F.S. |
| Conductivity calibration points | 1 point |
| pH measurement range | 01.00 to 15.00 pH |
| pH calibration points | 1 to 3 points |
| pH Buffer Solutions | USA (pH 4.01, 7.00, 10.01) or NIST (pH 4.01, 6.86, 9.18) |
| pH accuracy | ± 0.01 pH |