Portable Conductivity Meter LPCM-A11 is adapted with different modes for measuring quality of water on parameters such as conductivity, TDS and temperature. Due to its portable design, it is suitable for outdoor measurements i.e. on site water testing, remote area water testing and for research purpose. It is reliable and user friendly.
| Conductivity |
|
|---|---|
| TDS |
|
| Temperature |
|
| Temperature compensation | 0 to 100 °C, 32 to 212 ° F, Manual or Automatic |
| Temperature coefficient | Linear and Pure water compensation |
| Reference temperature | 20 °C or 25 °C |
| Stability conditions | Low or high |
| Cell constant | K= 0.1, 1, 10 or custom |
| Calibration due | 1 to 31 days or off |
| Memory | 500 data sets |
| Data hold | Manual or auto-end point |
| Connector | 6 pin mini plug |
| Power Control | Manual or Automatic (10, 20 or 30 minutes after last key pressed) |
| Power | 3 × 1.5 V AA batteries or DC 5 V power adapter |
| Dimension (L × W × H) | 170 × 85 × 30 mm |
| Weight | 300 g |
| Number of accessories | Accessories name |
| 1 | Conductivity electrode for general application |
| 2 | Conductivity electrode (K= 0.1): Suitable for measuring the low conductivity liquids ( <10 µS/cm ) for pure water |
| 3 | Conductivity electrode (K= 10): Suitable for measuring the high conductivity liquids ( >20 mS/cm ) for sea water |
Used for quality testing of water on different parameters in research and development labs, water resources and plants in nearby or remote area.
| Conductivity |
|
||||||||||
| Temperature |
|
||||||||||
| Temperature compensation | 0 to 100 °C, 32 to 212 ° F, Manual or Automatic | ||||||||||
| Temperature coefficient | Linear |
| Conductivity |
|
||||||||||
| TDS |
|
||||||||||
| Salinity |
|
||||||||||
| Resistivity |
|
| Conductivity |
|
||||||||||
| Salinity |
|
||||||||||
| Temperature |
|
||||||||||
| Temperature compensation | 0 to 100 °C, 32 to 212 ° F, Manual or Automatic |
| pH measurement range | 01.00 to 15.00 pH |
| pH calibration points | 1 to 3 points |
| pH Buffer Solutions | USA (pH 4.01, 7.00, 10.01) or NIST (pH 4.01, 6.86, 9.18) |
| pH accuracy | ± 0.01 pH |
| Residual chlorine/total chlorine |
|
||||||||
| Chlorine dioxide |
|
||||||||
| Light source | LED | ||||||||
| Wavelength of light | 515 nm |
Labtron benchtop meters are easy to use. The LCD display, manual or automatic mode of calibration, universal connector and other features are included in this range to produce accurate, reliable results. It consist of benchtop meter for measuring pH, conductivity, dissolved oxygen content, Ion concentration, water hardness level. These meters are suitable for simple to complex applications in water quality testing, research and analysis etc.
| Temperature compensation | 0 to 100°C, 32°F to 212°F Manual or Automatic |
| Hold function | Manual or automatic endpoint detection |
| Stability criteria | Standard or High-accuracy |
| Interval readings | 10, 30, 60 seconds, 10, 30 minutes or Off |
| pH measurement range | 0.00 to 14.00 pH |
| pH accuracy | ± 0.01 pH |
| pH resolution | 0.01 pH |
| Calibration points | 2 points |
| pH measurement range | -1.00 to 15.00 pH |
| pH accuracy | ± 0.01 pH |
| pH resolution | 0.01 pH |
| Calibration points | 1-3 points |
Labtron portable meters are used in quality analysis of water and other solutions. With portability, waterproof features, finds applications in indoor as well as outdoor measurement of pH, ORP, dissolved oxygen, water hardness, salinity, TDS etc.
| Water hardness range | 0.05 mmol / L - 0.2 mol / L<br/> (CaCO<sub>3</sub>) 0 - 19999 mg / L, (CaO) 0 - 11220 mg / L, (boiler) 0 - 400 mmol / L, (Ca) 0 - 8020 mg / L<br/> (German degree) 0 - 1122 °dH, (English degree) 0 - 1404 °e, (French degree) 0 - 2000 °f |
| Accuracy | ± 1 % F.S. |
| Calibration points | 2 to 5 points |
| Calibration solution | 0.001, 0.01, 0.1 mmol / L, 0.001, 0.01, 0.1 mol / L |
Labtron benchtop meters are easy to use. The LCD display, manual or automatic mode of calibration, universal connector and other features are included in this range to produce accurate, reliable results. It consist of benchtop meter for measuring pH, conductivity, dissolved oxygen content, Ion concentration, water hardness level. These meters are suitable for simple to complex applications in water quality testing, research and analysis etc.
| Ion measurement range | Na range: 1 × 10<sup>5</sup> - 1 M, 0.1 - 23000 ppm |
| Ion measurement accuracy | ± 0.5 % F.S. |
| Resolution | 0.001, 0.01, 0.1, 1 |
| Calibration points | 2 to 5 points |
| Ion measurement range | Cl range: 5 × 10<sup>6</sup> - 1 M, 1.8 - 35500 ppm |
| Ion measurement accuracy | ± 0.5 % F.S. |
| Resolution | 0.001, 0.01, 0.1, 1 |
| Calibration points | 2 to 5 points |
| Ion measurement range | F range: 1 × 10<sup>6</sup>M – saturation, 0.02 ppm to saturation |
| Ion measurement accuracy | ± 0.5 % F.S. |
| Resolution | 0.001, 0.01, 0.1, 1 |
| Calibration points | 2 to 5 points |