Labtron LKV-A11 Kinematic Viscometer is used for precise measurement with capillary viscometers. It is made according to “Test Methods for Kinematic Viscosity of Petroleum Products and Calculation of Dynamic Viscosity” as per ASTM D445.
| Ambient temperature | (-10) °C ~ 35 °C |
|---|---|
| Relative humidity | ≤ 85 % |
| Capillary viscometer | 11 pieces |
| Stirring motor | 6 W, 1200 rpm |
| Sample quantity | |
| Bath temperature | |
| Measurement range | |
| Bath cubage | |
| Temperature controlling range | |
| Temperature controlling accuracy | ± 0.1 °C |
| Illumination | |
| Constant temperature bath | 20 L; two layers water bath |
| Timing range | |
| Barometric | |
| Timing accuracy | |
| Timing device | |
| Temperature sensor | Industrial platinum resistance; Pt100 |
| Inner capillary viscometer diameters | 0.4, 0.6, 0.8, 1.0, 1.2, 1.5, 2.0, 2.5, 3.0, 3.5 and 4.0 mm respectively (inner diameters of 5.0 and 6.0mm are optional) |
| Mercury thermometer scale division |
It is used in the fields of petroleum & its products industries, research and development department.
| Ambient temperature | 15 to 35°C |
| Relative humidity | ≤ 85% |
| Capillary viscometer | 6 capillary Pinkevitch viscometer tubes |
| Stirring motor | 1200 rpm |
| Ambient temperature | (-10) °C ~ 35 °C |
| Relative humidity | ≤ 85 % |
| Capillary viscometer | 11 pieces |
| Stirring motor | 6 W, 1200 rpm |
| Ambient temperature | ≤ 30 °C |
| Relative humidity | ≤ 85 % |
| Capillary viscometer | 13 pieces |
| Stirring motor | 6 W, 1200 rpm |
| Ambient temperature | 0 ~ 40 ºC |
| Relative humidity | 20 ~ 90 %, RH while 40 ℃ |
| Temperature controlling accuracy | ± 0.1 °C |
| Timing range | 0.0 s ~ 9999.9 s |
| Ambient temperature | (-10) °C ~ 35 °C |
| Relative humidity | ≤ 85 % |
| Capillary viscometer | 11 pieces |
| Stirring motor | 6 W, 1200 rpm |
| Ambient temperature | (-10) °C ~ 35 °C |
| Relative humidity | ≤ 85 % |
| Capillary viscometer | 7 pieces of Cannon-Fenske reserve-flow capillary viscometer tubes in a group |
| Stirring motor | 6 W, 1200 rpm |
| Sample hole | 4 pieces |
| Speed of stirring motor | 1400 rpm |
| Speed for sample stirring | 1000 ± 50 rpm |
| Ambient temperature | Room temperature to 35°C |
| Sample hole | 2 pieces |
| Speed of stirring motor | 1400 rpm |
| Ambient temperature | 10 to 35°C |
| Temperature controlling range | Room Temperature to 100°C |
| Sample hole | 4 pieces |
| Sample quantity | 4 to 12 pieces |
| Ambient temperature | Room temperature to 35 °C |
| Temperature controlling range | Room temperature to 100°C |
| Vessel Volume | 4000 ml × 2 |
| Power of Vacuum pump | 160 W |
| Negative power | 3.7 kPa（27.75 mmHg） |
| Power of shaking machine | 30 W |
| Temperature controlling range | 10 ℃ ~ 35 ℃ |
| Temperature resolution | 0.001 ℃ |
| Mean value of heat capacity | 15 kJ / K |
| Ambient temperature | 20 ℃ ± 5 ℃ |
| Heat capacity | 14000 ~ 15000 J / K |
| Temperature measurement range | 10 ~ 35 ℃ |
| Repeatability error | ≤ 0.2 % (Grade C) |
| Endured pressure in oxygen bomb | 20 MPa |
| Temperature measurement range | 10 ~ 35 ℃ |
| Repeatability error | ≤ 0.2 % (Grade C) |
| Endured pressure in oxygen bomb | 20 MPa |
| Operation environment temperature | 15 ~ 28 ℃ |
| Measurement range | 32 ℃ to 160 ℃ |
| Ambient temperature | 35 °C |
| Temperature resolution | 0.01 ℃ |
| Beaker volume | 1000 mL |
| Graduated Flask | 200 ± 0.2 ml (50 ± 0.2 ml for bituminous materials) |
| Standard Water Value | 51 ± 1 s |
| Temperature Range | 0 ~ 100 °C |
| Ambient Temperature | 10 °C ~ 40 °C |
| Graduated Flask | 200 ± 0.2 ml |
| Standard Water Value | 51 ± 1 s |
| Temperature Range | 0 ~ 100 °C |
| Temperature Controlling Accuracy | ± 0.2 °C |
| Graduated Flask | 100 ml |
| Standard Water Value | 51 ± 1 s |
| Temperature Range | 0 ~ 100 °C |
| Temperature Controlling Accuracy | ± 0.1 °C |