Labtron LKV-A12 is designed and made as per ASTMD445 “Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids”. Its temperature accuracy can reach up to ±0.01°C.
| Ambient temperature | (-10) °C ~ 35 °C |
|---|---|
| Relative humidity | ≤ 85 % |
| Capillary viscometer | 11 pieces |
| Stirring motor | 6 W, 1200 rpm |
| Sample quantity | |
| Bath temperature | |
| Measurement range | |
| Bath cubage | |
| Temperature controlling range | Ambient temperature ~ 100 °C |
| Temperature controlling accuracy | ± 0.1 °C |
| Illumination | |
| Constant temperature bath | 20 L, two layer bath |
| Timing range | |
| Barometric | |
| Timing accuracy | |
| Timing device | 0.1 s ~ 999.9 s, resolution is 0.1 s |
| Temperature sensor | |
| Inner capillary viscometer diameters | 0.4, 0.6, 0.8, 1.0, 1.2, 1.5, 2.0, 2.5, 3.0, 3.5 and 4.0 mm respectively |
| Mercury thermometer scale division |
It is used in the fields of petroleum & its products industries, research and development department.
| Ambient temperature | (-10) °C ~ 35 °C |
| Relative humidity | ≤ 85 % |
| Capillary viscometer | 11 pieces |
| Stirring motor | 6 W, 1200 rpm |
| Ambient temperature | (-10) °C ~ 35 °C |
| Relative humidity | ≤ 85 % |
| Capillary viscometer | 7 pieces of Cannon-Fenske reserve-flow capillary viscometer tubes in a group |
| Stirring motor | 6 W, 1200 rpm |
| Ambient temperature | 15 to 35°C |
| Relative humidity | ≤ 85% |
| Capillary viscometer | 6 capillary Pinkevitch viscometer tubes |
| Stirring motor | 1200 rpm |
| Ambient temperature | ≤ 30 °C |
| Relative humidity | ≤ 85 % |
| Capillary viscometer | 13 pieces |
| Stirring motor | 6 W, 1200 rpm |
| Ambient temperature | (-10) °C ~ 35 °C |
| Relative humidity | ≤ 85 % |
| Capillary viscometer | 11 pieces |
| Stirring motor | 6 W, 1200 rpm |
| Ambient temperature | 0 ~ 40 ºC |
| Relative humidity | 20 ~ 90 %, RH while 40 ℃ |
| Temperature controlling accuracy | ± 0.1 °C |
| Timing range | 0.0 s ~ 9999.9 s |
| Ambient temperature | 10 °C ~ 40 ℃ |
| Relative humidity | ≤ 80 % |
| Ignition Mode | electron igniter / gas flame |
| Temperature range | Room Temperature ~ 300 ℃ |
| Ambient temperature | 10 °C ~ 40 °C |
| Relative humidity | ≤ 80 % |
| Measurement Range | Ambient Temperature ~ 250 °C |
| Flash Point | Lower than 104 °C , error is 2 °C; Higher than 104 °C , error is 6 °C |
| Ambient temperature | ≤ 35 °C |
| Relative humidity | ≤ 85 % |
| Temperature range | 5 °C ~ 110 °C, Each scale division is 0.5 °C; 20 °C ~ 150 °C, Each scale division is 1.0 °C; 90 °C ~ 370 °C, Each scale division is 2 °C |
| Aperture of ignition device | 0.8 mm |
| Beaker quantity | 600 ml |
| Ambient temperature | (-10) °C ~ 40 °C |
| Relative humidity | ≤ 85 % |
| Thermometer Measurement range | (-5) °C ~ 300 °C |
| Ambient temperature | ≤ 35 ℃ |
| Relative humidity | ≤ 85 % |
| Heating power of electric furnace | 250 W × 2 |
| Total power consumption | ≤ 700 W |
| Temperature Range | Ambient to 100°C |
| Temperature Precision | ± 0.1°C |
| Air Flow | 94 mL ± 5 mL/min, with flowmeters |
| Timing Unit | 0 to 99 min 59 s, resolution 1 s |
| Measuring range | 0 to 700 taper degree (digital display table 0-70 mm) |
| Timing device | Timing error is less than ±0.1 s |
| Resolution | 0.01 mm |
| Needle insertion accuracy | ±1 cone insertion degree |
| Graduated Flask | 200 ± 0.2 ml |
| Standard Water Value | 51 ± 1 s |
| Temperature Range | 0 ~ 100 °C |
| Temperature Controlling Accuracy | ± 0.2 °C |
| Graduated Flask | 100 ml |
| Standard Water Value | 51 ± 1 s |
| Temperature Range | 0 ~ 100 °C |
| Temperature Controlling Accuracy | ± 0.1 °C |
| Graduated Flask | 200 ± 0.2 ml (50 ± 0.2 ml for bituminous materials) |
| Standard Water Value | 51 ± 1 s |
| Temperature Range | 0 ~ 100 °C |
| Ambient Temperature | 10 °C ~ 40 °C |