Automatic Bomb Calorimeter LABC-B11 comes with semi-automatic oxygen filling and releasing system. Equipped with blades to achieve high stirring efficiency, and faster heat transfer of oxygen bomb to reduce test period. It is confirmed to the international standards ASTM D5865, ISO 1928.
| Calorimeter type | Isoperibol |
|---|---|
| Oxygen filling | Semi-automatic |
| Bomb volume | 282 ml |
| Analysis time | 15 to 25 min |
| Bomb washing | Manual |
| Bomb pressure (maximum) | 20 MPa |
| Bomb identity | No |
| No. of Tests | 2 to 4/ hour |
| Temperature resolution | 0.0001 K |
| Precision (RSD) | ≤ 0.15 % |
| Heat Capacity Stability | ≤ 0.25 % within three months |
| Gas requirement | 99.5 % Oxygen |
| Water requirements | Distilled water |
| Energy measurement range | 0 to 50000 J |
| Bucket filling | Semi-Automatic |
| Stirring method | Blade |
| Reproducibility | 0.15 % (analysis of 1 g of benzoic acid) |
| Temperature Increase | 2°C (average) |
| Temperature measurement | PT1000 (temperature probe) |
| Working temperatures | ≤ 32°C |
| Cooling type | Automatic by water circulation |
| Network | Yes |
| Maximum Power | 0.5 kW |
| Power Inverter | No |
| Power supply | 220 V ±, 15 to 10 %, 50/60 Hz |
| Advance Calculations | No |
| Dimension | Main body: 600 × 417 × 908 mm |
| Weight | 106 kg |
| Accessories no. | Name | Unit | Qty. |
| 1 | Ignition thread (500 pieces) Box | Box | 20 |
| 2 | Standard Benzoic Acid (1 gm * 10 pieces) | Bottle | 10 |
| 3 | Gasket Ring for Oxygen Filling Facility (big, middle, small) | Set | 15 |
| 4 | Heating Crucible | PC | 60 |
| 5 | Oxygen bomb gasket ring (big, middle, small) | Set | 15 |
| 6 | Plastic insulation cover | Set | 5 |
| 7 | Special Oxygen filling pipe | PC | 2 |
| 8 | Electrodes | Set | 1 |
Used in coal, petroleum, cement, farming, medical research, electronics for measurement of Calorific Value of combustible materials.
| Calorimeter type | Isoperibol |
| Oxygen filling | Fully automatic oxygen filling & releasing, fully automatic bomb raising & lowering |
| Bomb volume | 250 ml |
| Analysis time | < 8 min full test process: <10 min |
| Calorimeter type | Isoperibol |
| Temperature range | 5 to 40°C |
| Measurement range | 5 to 40 MJ/ kg |
| Operation Mode | A. Outer barrel temperature follows room temperature change mode Or B. Outer barrel temperature constant mode |
| Calorimeter type | Isoperibol |
| Temperature range | 5 to 40°C |
| Measurement range | 5 to 40 MJ/ kg |
| Operation Mode | The outer barrel temperature is constant |
| Temperature controlling accuracy | ≤ 0.5 ℃ |
| Temperature controlling range | Room temperature ~ 200 ℃ |
| Power supply for illumination | 5 V |
| Power of motor | 2 kW |
| Measurement range | Room temperature ~ 150°C |
| Stirring speed | 0 ~ 1200 r / min |
| Heating power | 25 W |
| Interior Dimension | 360 × 250 × 545 mm |
| Evaporation bath type and size | Aluminum bath φ260 × 130 mm |
| Holes for testing | 5 pieces |
| Size of holes for testing cylinder | φ51 × 70 mm |
| Working temperature | 160 ℃ ~ 165℃ |
| Evaporation bath type and size | Aluminum block bath, φ260 × 130 mm |
| Holes for testing | 3 pieces |
| Size of holes for testing cylinder | φ51 × 70 mm |
| Flow rate display | Flow meter |
| Bath type | Oil bath |
| Bath capacity | 5000 ml ± 50 ml |
| Ambient temperature | Room temperature to 35 °C |
| Relative humidity | ≤ 85 % |
| Power supply | AC 220 V ± 5 % , 50Hz |
| Measurement range | 0 ~ 75 kV |
| Voltage rising rate | 3 kV ± 10 % / s |
| Distance between electrodes | 2.5 mm |
| Dimension | 390 x 260 x 590 mm |
| Total power consumption | ≤ 1200 W |
| Power supply | AC 220 V ± 10 %, 50 Hz |
| Heating power of water bath | 1000 W |
| Power supply | AC 220 V ± 10 %, 50 Hz |
| Temperature controlling range in water bath | RT ~ 90 ℃ ± 5 ℃ |
| Cooling bath temperature | (-35) ℃ ± 1 ℃ |
| Evaporation temperature | 35 ℃ ± 1 ℃ |
| Temperature controlling range | 10 ℃ ~ 35 ℃ |
| Temperature resolution | 0.001 ℃ |
| Mean value of heat capacity | 15 kJ / K |
| Ambient temperature | 20 ℃ ± 5 ℃ |
| Temperature measurement range | 10 ~ 35 ℃ |
| Repeatability error | ≤ 0.2 % (Grade C) |
| Endured pressure in oxygen bomb | 20 MPa |
| Operation environment temperature | 15 ~ 28 ℃ |
| Heat capacity | 14000 ~ 15000 J / K |
| Temperature measurement range | 10 ~ 35 ℃ |
| Repeatability error | ≤ 0.2 % (Grade C) |
| Endured pressure in oxygen bomb | 20 MPa |
| Refrigeration system | New-type refrigeration compressor |
| Controlling temperature of cold trough | Cold trough I: RT ~ (-51) °C, ± 1°; Cold trough II:RT ~ (-80) °C, ± 1 °C |
| Ambient temperature | ≤ 30 ℃ |
| Relative humidity | ≤ 85 % |
| Ambient temperature | (-10)℃ ~ 35 ℃ |
| Relative humidity | ≤ 85 % |
| Sample cup Inner diameter | 31.0 ~ 32.0 mm |
| Sample cup Wall thickness | 1.0 ~ 1.5 mm |
| Temperature controlling accuracy | ± 0.5 ℃ |
| Refrigeration system | New-type refrigeration compressor |
| Cold trough | Two holes in one trough, and same temperature |
| Ambient temperature | ≤ 30 ℃ |