Crude Petroleum Water Content Tester LWT-B10 designed as per ASTM D4006 Standard Test Method for Water in Crude Oil by Distillation. Widely used to determine the water content in crude oils. Features double unit, desktop structure, for simultaneous determination of two samples at a time.
| Ambient Temperature Range | -10 to 35°C |
|---|---|
| Relative Humidity | ≤85% |
| Distillation Flask | 1000 ml |
| Receiver | 5 ml, with 0.05 ml graduation |
| Condenser | 400 mm with ± 5 mm accuracy |
| Heating Unit | Heating mantle cap, |
| Heating Mantle Cap Power | 500 W × 2, continuous adjustment |
| Sample Determination | 2 at a time |
| Dimension (exclusive of test vessels) | 425 × 330 × 150 mm |
| Dimension (Inclusive of test vessels) | 425 × 330 × 1180 mm |
| Dimension | |
| Power Supply | AC 200 ± 10 % V, 50 Hz |
Used for determination of water content in crude oil, lubricants, petroleum oil and biofuels, other petrochemical products.
| Ambient Temperature Range | ≤ 35°C |
| Relative Humidity | ≤ 85% |
| Heating Mantle Cap Power | 1000 W |
| Sample Determination | 1 at a time |
| Maximum current | 400 mA |
| Measurement range | 3 µg to 9999.9 µg |
| Resolution | 0.1 µg |
| Precision 1 | ± 2 µg (3µg H<sub>2</sub>O to 20µg H<sub>2</sub>O) |
| Ambient Temperature | 10°C to 35°C |
| Measurement Range | 0 to 100 mg |
| Resolution | 0.1 µg |
| Max. Electrolysis Speed | 40 µg /s |
| Ambient Temperature Range | ≤ 35°C |
| Relative Humidity | ≤ 85% |
| Heating Mantle Cap Power | 1000 W × 2 |
| Sample Determination | 2 at a time |
| Potential measuring range | (0 to ±1999.5) Mv |
| Intrinsic error | 0.1 % ±0.5 mV |
| Input impedance | Ri ≥1 × 1012 Ω |
| Burette capacity | 10 mL |
| Thermometer | 6 ℃ ~ 400 ℃ |
| Scale Division | 2 °C |
| Spout Aperture | 0.6 ~ 0.8 mm |
| Ambient Temperature | -10 ℃ ~ 50 ℃ |
| Thermometer | 0 ℃ ~ 360 °C |
| Scale Division | 1 °C |
| Ambient Temperature | ≤ 35 °C |
| Relative Humidity | ≤ 85 % |
| Ambient Temperature | 10 ℃ ~ 40 ℃ |
| Relative Humidity | ≤ 85 % |
| Temperature Measurement- Full Scale | Ambient temperature to ~ 400 ℃ |
| Temperature Measurement- Repeatability | ≤ 4 ℃ |
| Sample hole | 4 pieces |
| Speed of stirring motor | 1400 rpm |
| Speed for sample stirring | 1000 ± 50 rpm |
| Ambient temperature | Room temperature to 35°C |
| Sample hole | 4 pieces |
| Sample quantity | 4 to 12 pieces |
| Ambient temperature | Room temperature to 35 °C |
| Temperature controlling range | Room temperature to 100°C |
| Sample hole | 2 pieces |
| Speed of stirring motor | 1400 rpm |
| Ambient temperature | 10 to 35°C |
| Temperature controlling range | Room Temperature to 100°C |
| Graduated flask | 100 ml，50 ml |
| Conical flask | 100ml |
| Separatory funnel | 250ml |
| Ambient temperature | (-10 )°C to 35 °C |
| Measurement range | ≥0.05 mg KOH/g |
| Potential measurement range | 0 to 1800.0 mV |
| Burette volume | 10 mL |
| Minimum titration volume | 0.001 ml |
| Ambient temperature | ≤ 35 °C |
| Relative humidity | ≤ 85 % |
| Precision of titration tube | Scale division is 0.02 ml |
| Total power consumption | ≤ 1200 W |
| Cubage of bath | Ф300 × 380 mm |
| Temperature controlling range | 0 °C ~ 100 °C |
| Temperature controlling accuracy | ± 0.2 °C |
| Temperature sensor | Industrial platinum resistance, Pt100 |